SleepPhones Kabellose Schlafkopfhörer V8 Benutzerhandbuch

Einführung

The SleepPhones Wireless Sleep Headphones V8 are designed to provide a comfortable audio experience for sleeping, relaxation, travel, and light exercise. Featuring ultra-thin, high-quality speakers embedded within a soft, machine-washable headband, these headphones allow you to listen to audio content without the discomfort of traditional earbuds or bulky headphones, especially when lying down. This manual provides essential information for the proper setup, operation, and maintenance of your SleepPhones.

Image: SleepPhones Wireless Sleep Headphones in Nighttide Navy Breeze fabric, showcasing the comfortable headband design.

Packungsinhalt

Bitte überprüfen Sie, ob alle Artikel in Ihrem Paket vorhanden sind:

• SleepPhones Wireless Sleep Headphones (Headband with integrated speakers and Bluetooth module)
• USB-Ladekabel
• Benutzerhandbuch (dieses Dokument)

Image: Disassembled SleepPhones showing the soft headband, two ultra-flat speakers, and the compact Bluetooth module.

Aufstellen

1. Aufladen des Geräts

Before first use, fully charge your SleepPhones. The device features a rechargeable battery designed for up to 24 hours of playback on a full charge. A full charge typically takes approximately 3 hours.

1. Locate the small opening on the back of the headband where the Bluetooth module is inserted.
2. Carefully remove the Bluetooth module from the headband.
3. Connect the supplied USB charging cable to the charging port on the Bluetooth module.
4. Connect the other end of the USB cable to a USB power source (e.g., computer USB port, wall adapter).
5. The indicator light on the module will illuminate during charging and turn off when fully charged.
6. Once charged, carefully reinsert the Bluetooth module into the headband, ensuring the control buttons are accessible from the outside.

2. Bluetooth-Kopplung

Pair your SleepPhones with your Bluetooth-enabled device (smartphone, tablet, laptop, smart speaker) to begin audio playback. The SleepPhones use Bluetooth 5.0 technology and have a range of up to 30 feet.

1. Ensure your SleepPhones are charged and turned off.
2. Press and hold the center button on the Bluetooth module for approximately 5-7 seconds until the indicator light flashes blue and red, indicating pairing mode.
3. On your audio device, go to the Bluetooth settings and ensure Bluetooth is enabled.
4. Suchen nach new devices. "SleepPhones" should appear in the list of available devices.
5. Select "SleepPhones" to connect. Once connected, the indicator light on the module will typically turn solid blue or flash blue slowly.
6. Your SleepPhones are now paired and ready for use. You only need to pair them once with each device. For subsequent uses, they should automatically connect when turned on and within range of a previously paired device.

Bedienungsanleitung

Wearing the Headband

The SleepPhones headband is designed for comfort in various positions, including side sleeping. The ultra-thin speakers are adjustable within the headband to align perfectly with your ears.

• Place the headband around your head, ensuring the speakers are positioned over your ears.
• Adjust the speakers by sliding them within the fabric of the headband until they are comfortably aligned with your ears.
• The control module can be positioned at the back of your head or on your forehead, depending on your preference and sleeping position.

Image: A woman sleeping on her side, demonstrating the comfort of SleepPhones with ultra-flat speakers.

Image: A sizing chart for SleepPhones, indicating head circumference measurements for Small (20-21 3/8"), Medium (21 1/2-23 3/8"), and Large (23 1/2-25+") sizes.

Steuerfunktionen

The Bluetooth module features intuitive buttons for controlling your audio playback:

• Mittlere Taste:
  • 3 Sekunden lang gedrückt halten: Ein-/Ausschalten.
  • Single press: Play/Pause audio.
  • Press and hold for 5-7 seconds (when off): Enter Bluetooth pairing mode.
• Oberer Knopf (+):
  • Single press: Increase volume.
  • Double press: Skip to the next track/video.
• Untere Schaltfläche (-):
  • Single press: Decrease volume.
  • Double press: Skip to the previous track/video.

Wartung

Cleaning the Headband

The SleepPhones headband is machine washable, ensuring hygiene and longevity. It is made from 95% polyester and 5% spandex SheepCloud™ custom technical athletic performance fabrics, which are moisture-wicking.

1. Wichtig: Before washing, carefully remove the speakers and the Bluetooth module from the headband. Slide them out through the opening at the back.
2. Machine wash the fabric headband in cold water with similar colors.
3. Im Trockner bei niedriger Temperatur oder an der Luft trocknen.
4. Once the headband is completely dry, carefully reinsert the speakers and Bluetooth module, ensuring the speakers are flat and positioned correctly over the ear areas.

Image: SleepPhones available in two fabric types, SheepCloud™ Breeze and SheepCloud™ Fleece, with various color options. Both fabrics are machine washable.

Allgemeine Pflege

• Avoid exposing the electronic components (speakers and module) to water or excessive moisture.
• Store your SleepPhones in a clean, dry place when not in use.
• Do not attempt to disassemble the speakers or Bluetooth module beyond removing them from the headband for cleaning.

Fehlerbehebung

Technische Daten

• Modellname: SleepPhones Wireless Sleep Headphones
• Modellnummer: S3B8NM-US
• Konnektivitätstechnologie: Kabellos (Bluetooth 5.0)
• Bluetooth-Reichweite: Bis zu 30 Fuß (9 Meter)
• Akkulaufzeit: Bis zu 24 Stunden
• Ladezeit: Ungefähr 3 Stunden
• Frequenzgang: 20 Hz – 20 kHz
• Impedanz: 32 Ohm
• Material: 95% Polyester, 5% Spandex (SheepCloud™ Breeze fabric for this model)
• Produktabmessungen: 10.83 x 2.76 x 0.2 inches (approximate headband dimensions)
• Artikelgewicht: 2.7 Unzen (76.5 Gramm)
• Steuerungstyp: Tastensteuerung
• Kompatible Geräte: Smartphones, Tablets, Laptops, Smart Speaker
• Wasserbeständigkeit: Not Water Resistant (electronics must be removed before washing)

Image: A visual comparison highlighting the ultra-flat design of SleepPhones speakers (sewn fleece) compared to thicker, harder imitation speakers (cloth glue insulation, plastic).

Garantie und Support

SleepPhones are manufactured by AcousticSheep, a company committed to quality and customer satisfaction. Your SleepPhones Wireless Sleep Headphones are covered by the manufacturer's limited warranty.

For technical troubleshooting, sizing questions, or inquiries regarding the manufacturer's limited warranty, please contact AcousticSheep customer support. Detailed contact information can typically be found on the AcousticSheep official webor oder innerhalb der Produktverpackung.

Online-Ressourcen:

• Official SleepPhones WebWebsite: www.sleepphones.com
• AcousticSheep Customer Support: Refer to the official webWebsite für Kontaktmöglichkeiten (E-Mail, Telefon).