Bedienungsanleitung für die kabellosen Schlafkopfhörer von SleepPhones

Einführung

The SleepPhones Wireless Sleep Headphones are designed to provide a comfortable audio experience for sleeping, relaxation, and travel. Featuring ultra-thin, high-quality speakers embedded within a soft, machine-washable headband, these headphones allow you to listen to music, audiobooks, podcasts, or white noise without the discomfort of traditional headphones or earbuds. This manual provides essential information for the setup, operation, maintenance, and troubleshooting of your SleepPhones Wireless.

Image: SleepPhones Wireless Sleep Headphones in Midnight Black Fleece fabric. The soft headband contains the internal electronics and speakers, designed for comfort during sleep.

Aufstellen

1. Enthaltene Komponenten

Your SleepPhones Wireless package includes:

• SleepPhones Wireless Headband (with integrated speakers and Bluetooth module)
• USB-Ladekabel

2. Erstes Aufladen

Before first use, fully charge your SleepPhones Wireless. The battery requires approximately 3 hours for a full charge.

1. Locate the charging port on the Bluetooth module inside the headband.
2. Connect the provided USB charging cable to the module and a USB power source (e.g., computer USB port, wall adapter).
3. A red indicator light will illuminate during charging. The light will turn off or change color (depending on model) when fully charged.

A full charge provides up to 24 hours of audio playback.

3. Sizing and Fitting

Ensure you have the correct size for optimal comfort and sound quality. SleepPhones are available in Small, Medium, and Large sizes. The headband should fit snugly but comfortably around your head.

Image: A diagram illustrating how to measure your head circumference for SleepPhones sizing. Sizes are Small (20 - 21 3/8"), Medium (21 1/2 - 23 3/8"), and Large (23 1/2 - 25+").

Adjust the internal speakers by sliding them along the headband until they are positioned directly over your ears. The Bluetooth module should typically rest at the back of your head, but can be adjusted for comfort.

Image: A person sleeping on their side, demonstrating the comfort of SleepPhones with ultra-flat speakers that reduce ambient noise and snoring sounds.

4. Bluetooth-Kopplung

Pair your SleepPhones Wireless with your Bluetooth-enabled device (smartphone, tablet, laptop, smart speaker) to begin audio playback.

1. Ensure your SleepPhones are charged and turned off.
2. Press and hold the center button on the Bluetooth module for approximately 5-7 seconds until the indicator light flashes blue and red, indicating pairing mode.
3. Gehen Sie auf Ihrem Gerät zu den Bluetooth-Einstellungen und aktivieren Sie Bluetooth.
4. Select "SleepPhones" from the list of available devices.
5. Once connected, the indicator light on the module will typically flash blue slowly or turn solid blue.
6. Your SleepPhones are now ready for use. They will automatically attempt to reconnect to the last paired device when powered on.

Bedienungsanleitung

1. Grundlegende Steuerelemente

The Bluetooth module features intuitive button controls:

• Mittlere Taste:
  • Press and hold (3 seconds): Power On/Off
  • Press and hold (5-7 seconds from off): Enter Pairing Mode
  • Single press: Play/Pause audio, Answer/End call
• Lautstärketaste (+):
  • Einmaliges Drücken: Lautstärke erhöhen
  • Double press: Skip to next track
• Leiser-Taste (-):
  • Einmaliges Drücken: Lautstärke verringern
  • Double press: Skip to previous track

Image: A person wearing SleepPhones while traveling, illustrating the built-in volume and play/pause buttons on the module, and emphasizing the 24-hour battery life and premium audio.

2. Audiowiedergabe

Once paired, simply start playing audio from your connected device. The sound will transmit wirelessly to your SleepPhones. The Bluetooth range is approximately 10 meters (30 feet), allowing for movement without losing connection.

3. Using as an Eye Mask

The SleepPhones headband can also be pulled down over your eyes to function as a comfortable eye mask, blocking out light for enhanced sleep or relaxation.

Wartung

1. Reinigung des Kopfbandes

The SleepPhones headband is machine washable after removing the electronic components.

1. Gently remove the speakers and Bluetooth module from the headband. They are typically held in place by small openings or pockets.
2. Machine wash the fabric headband in cold water.
3. Im Trockner bei niedriger Temperatur oder an der Luft trocknen.
4. Once dry, reinsert the speakers and module into their original positions. Ensure the speakers are flat and positioned correctly over the ear areas.

Abbildung: Ein zerlegter view of SleepPhones, showing the comfortable headband, two ultra-flat speakers, and the award-winning thin and flexible Bluetooth module. This illustrates how components can be removed for washing.

Image: A visual representation of the two SheepCloud fabric types available for SleepPhones: Breeze (for cooler wear) and Fleece (for softer wear). Both are machine washable.

2. Batteriepflege

So verlängern Sie die Akkulaufzeit:

• Vermeiden Sie häufiges vollständiges Entladen des Akkus.
• Bewahren Sie das Gerät an einem kühlen, trockenen Ort auf, wenn es längere Zeit nicht benutzt wird.
• Verwenden Sie ausschließlich das mitgelieferte Ladekabel oder ein zertifiziertes gleichwertiges Kabel.

Fehlerbehebung

Kein Strom / Schaltet sich nicht ein

• Stellen Sie sicher, dass der Akku geladen ist. Schließen Sie das Gerät an eine Stromquelle an und lassen Sie es mindestens 30 Minuten lang laden, bevor Sie es einschalten.
• Press and hold the center button for 3 seconds to power on.

Kopplung mit Gerät nicht möglich

• Ensure SleepPhones are in pairing mode (flashing blue and red light). If not, power off and then press and hold the center button for 5-7 seconds.
• Make sure Bluetooth is enabled on your device and it is within 10 meters (30 feet) of the SleepPhones.
• Forget "SleepPhones" from your device's Bluetooth list and attempt to pair again.
• Restart both your device and the SleepPhones.

Kein Ton / geringe Lautstärke

• Check the volume level on both your SleepPhones (using the +/- buttons) and your connected device.
• Ensure the SleepPhones are properly connected to your device (Bluetooth indicator light should be solid blue or slowly flashing blue).
• Verify that the speakers are correctly positioned over your ears inside the headband.

Discomfort While Sleeping

• Adjust the position of the speakers within the headband to ensure they are flat and centered over your ears.
• Experiment with the placement of the Bluetooth module (e.g., at the back of the head, or slightly to the side) to find the most comfortable position for your sleeping style.
• Ensure you have the correct size headband. Refer to the sizing guide in the Setup section.

Image: A cross-sectional comparison showing the thin, flat design of SleepPhones speakers (sewn into fleece) compared to thicker, harder imitation speakers (made with plastic or glue insulation), highlighting the comfort advantage of SleepPhones.

Technische Daten

Garantie und Support

SleepPhones Wireless Sleep Headphones come with a manufacturer's limited warranty. For specific details regarding the warranty period and coverage, please refer to the documentation included with your product or contact AcousticSheep customer service.

AcousticSheep, the manufacturer of SleepPhones, provides dedicated customer service for technical troubleshooting, sizing questions, and warranty claims. They hand-assemble products in Erie, PA, and are committed to assisting users.

For assistance, please visit the official SleepPhones webBesuchen Sie die Website oder konsultieren Sie die Kontaktinformationen auf Ihrer Produktverpackung.