1. Einleitung
The LogiLink SH0125 is a 2-gang Smart Home Wi-Fi Wall Switch designed to provide convenient control over your lighting. It integrates with existing Wi-Fi networks and can be managed via the Smart Life or Megos Smart Home application. This device also supports voice control through Amazon Alexa and Google Home, offering enhanced automation for your home environment.
2. Sicherheitshinweise
- Elektroinstallation: Installation must be performed by a qualified electrician in accordance with local electrical codes and regulations. Ensure the main power supply is disconnected before installation.
- Nur zur Verwendung im Innenbereich: This device is intended for indoor use in dry locations. Do not expose to moisture or extreme temperatures.
- Nennleistung: Do not exceed the maximum load rating of 230 Watts (AC 230V, 10.0 A). Overloading can cause damage to the switch and connected devices, and poses a fire hazard.
- Reinigung: Vor der Reinigung die Stromzufuhr unterbrechen. Ein weiches, trockenes Tuch verwenden. Keine flüssigen oder Aerosolreiniger verwenden.
3. Packungsinhalt
Bitte prüfen Sie das Paket auf folgende Artikel:
- 1x LogiLink SH0125 Smart Home Wi-Fi Wall Switch
- 1x User Manual (French version included, English provided here)
4. Produktüberschreitungview
The LogiLink SH0125 features a sleek design with two touch-sensitive buttons for manual control. The rear of the device provides terminals for electrical wiring.
Abbildung 1: Front view of the LogiLink SH0125 Smart Home Wi-Fi Wall Switch. It features a white glass panel with two circular touch buttons, each marked with a power symbol. The 'Powered by Tuya' logo is visible in the bottom left corner.
Abbildung 2: Zurück view of the LogiLink SH0125 Smart Home Wi-Fi Wall Switch. This image displays the wiring terminals labeled L1, L2, L, and N, along with product specifications such as input voltage (AC 230V), frequency (50 Hz), and maximum power ratings for different lamp Typen.
5. Einrichtung
5.1. Elektrische Installation
- Stromversorgung trennen: Before beginning any electrical work, ensure the main power supply to the circuit is turned off at the circuit breaker.
- Alten Schalter entfernen: Entfernen Sie vorsichtig Ihren vorhandenen Wandschalter aus der Wanddose.
- Drähte identifizieren: Identify the Live (L), Neutral (N), and Load (L1, L2) wires. Refer to Figure 2 for terminal identification on the LogiLink SH0125.
- Schließen Sie den Schalter an: Connect the wires to the corresponding terminals on the LogiLink SH0125.
- Schließen Sie den stromführenden Draht an den Anschluss „L“ an.
- Schließen Sie den Neutralleiter an den Anschluss 'N' an.
- Connect the Load wire for the first light circuit to the 'L1' terminal.
- Connect the Load wire for the second light circuit to the 'L2' terminal.
- Montieren Sie den Schalter: Carefully place the wired switch into the wall box and secure it with screws. Attach the faceplate.
- Strom wiederherstellen: Schalten Sie die Hauptstromversorgung am Sicherungsautomaten wieder ein.
5.2. App-Kopplung
To control your switch via smartphone, you need to pair it with the Smart Life or Megos Smart Home app.
- Lade App herunter: Download and install the 'Smart Life' or 'Megos Smart Home' app from your device's app store (iOS or Android).
- Registrieren/Anmelden: Öffne die App und registriere dich für ein neues Konto oder melde dich mit einem bestehenden Konto an.
- Kopplungsmodus aktivieren: With the switch powered on, press and hold one of the touch buttons for approximately 5-10 seconds until the LED indicator on the switch starts blinking rapidly. This indicates it is in pairing mode.
- Gerät in der App hinzufügen: In the app, tap the '+' icon (usually in the top right corner) to add a new device. Select 'Wall Switch (Wi-Fi)' or a similar category.
- Mit WLAN verbinden: Follow the on-screen instructions to connect the switch to your 2.4GHz Wi-Fi network. Ensure your phone is also connected to the same 2.4GHz network during pairing. Note: This device does not support 5GHz Wi-Fi networks.
- Vollständige Kopplung: Once the switch is successfully added, you can rename it and assign it to a room within the app.
Abbildung 3: The LogiLink SH0125 Smart Home Wi-Fi Wall Switch positioned next to a smartphone displaying the 'Register' or 'Login with Existing Account' screen of the Smart Home application, illustrating the initial setup phase.
6. Bedienung des Schalters
6.1. Manuelle Steuerung
Each touch button on the switch controls one connected light circuit. Simply tap a button to toggle the corresponding light ON or OFF.
6.2. App-Steuerung
After successful pairing, you can control the switch from the Smart Life or Megos Smart Home app:
- Ein/Aus: Tap the virtual switch icons in the app to turn lights on or off.
- Terminplanung: Set schedules for your lights to turn on or off automatically at specific times.
- Szenen: Create custom scenes to control multiple smart devices with a single command.
- Automatisierung: Set up automations based on conditions like sunrise/sunset, temperature, or other smart device statuses.
Abbildung 4: Eine Nahaufnahme view of a hand holding a smartphone, showing the Smart Life application interface. The app displays two virtual light switches, labeled 'Switch 1' and 'Switch 2', allowing for remote control of connected lighting.
6.3. Sprachsteuerung (Alexa/Google Home)
To enable voice control, link your Smart Life/Megos Smart Home account to Amazon Alexa or Google Home:
- Sprachassistenten-App öffnen: Öffnen Sie die Amazon Alexa App oder die Google Home App auf Ihrem Smartphone.
- Fähigkeit aktivieren/Konto verknüpfen: Suchen nach the 'Smart Life' or 'Megos Smart Home' skill/service and enable it. You will be prompted to link your account using your app credentials.
- Geräte entdecken: Once linked, ask your voice assistant to discover devices (e.g., "Alexa, discover my devices" or "Hey Google, sync my devices").
- Sprachbefehle: You can now control your lights using voice commands, such as:
- "Alexa, schalte das Wohnzimmerlicht ein."
- "Hey Google, turn off Kitchen Light."
7. Wartung
The LogiLink SH0125 requires minimal maintenance. Ensure the power is off before cleaning.
- Reinigung: Use a soft, dry, lint-free cloth to wipe the surface of the switch. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish or internal components.
- Firmware-Updates: Periodically check the Smart Life/Megos Smart Home app for available firmware updates to ensure optimal performance and security.
8. Fehlerbehebung
If you encounter issues with your LogiLink SH0125, refer to the following common solutions:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Der Schalter reagiert nicht auf Berührung. | Kein Strom; falsche Verkabelung; Schalterdefekt. | Check circuit breaker. Verify wiring (refer to Section 5.1). If problem persists, contact support. |
| Verbindung zu WLAN/App nicht möglich. | Incorrect Wi-Fi password; 5GHz Wi-Fi network; switch not in pairing mode; weak Wi-Fi signal. | Ensure correct 2.4GHz Wi-Fi password. Confirm switch is blinking rapidly (pairing mode). Move switch closer to router or improve Wi-Fi signal. |
| Sprachsteuerung funktioniert nicht. | Account not linked; device not discovered; incorrect voice command. | Ensure Smart Life/Megos Smart Home account is linked in Alexa/Google Home app. Ask assistant to discover devices. Use correct device names in commands. |
| Die Lichter flackern oder gehen nicht vollständig aus. | Incompatible load (e.g., some LED lights); minimum load not met. | Ensure connected lights are compatible with smart switches. Some LED lights may require a bypass capacitor (not included) to prevent flickering. Consult a qualified electrician. |
9. Spezifikationen
| Besonderheit | Spezifikation |
|---|---|
| Modellnummer | SH0125 |
| Marke | LogiLink |
| Eingangslautstärketage | Wechselstrom 230 V ~ 50 Hz |
| Max. Strom | 10.0 A |
| Max. Power (Total) | 230 Watt |
| Abmessungen (L x B x H) | 8.6 x 8.6 x 3.4 cm |
| Gewicht | 90 Gramm |
| Material | Plastik |
| Farbe | Weiß |
| Wi-Fi-Standard | 2.4 GHz (IEEE 802.11b/g/n) |
| Kontrollmethode | Application, Touch Button |
| Kompatibilität | Tuya, Amazon Alexa, Google Home |
| Installationstyp | Unterputz |
10. Garantie und Support
LogiLink products are designed and manufactured to the highest quality standards. For information regarding warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official LogiLink website. For technical support or assistance with product setup and troubleshooting, please contact LogiLink customer service through their official channels.