Qulomvs Mesh Ergonomic Office Chair with Footrest

Einführung

Thank you for choosing the Qulomvs Mesh Ergonomic Office Chair with Footrest. This manual provides comprehensive instructions for the assembly, operation, and maintenance of your new office chair. Please read this manual carefully before assembly and use to ensure proper function and safety. Keep this manual for future reference.

Figure 1: The Qulomvs Mesh Ergonomic Office Chair with Footrest, showcasing sein Design und seine Funktionen.

Sicherheitshinweise

• Maximale Gewichtskapazität: This chair is designed to support a maximum weight of 300 pounds (136 kg). Do not exceed this limit.
• Ensure all screws and bolts are securely tightened before initial use. Periodically check and re-tighten as necessary to maintain stability.
• Stellen Sie sich nicht auf den Stuhl.
• Bitte benutzen Sie den Stuhl nur auf einer stabilen, ebenen Fläche.
• Keep hands and feet clear of moving parts during adjustment to prevent injury.
• Dieser Stuhl ist nur für den Innenbereich bestimmt.

Packungsinhalt

Bitte überprüfen Sie vor Beginn der Montage, ob alle Komponenten vorhanden und unbeschädigt sind. Sollten Teile fehlen oder beschädigt sein, wenden Sie sich bitte an den Kundendienst.

• 1x White Office Chair with Footrest (disassembled)
• 1x Bag of Screws (all necessary fasteners)
• 1x Installation Instruction Paper
• 1x Montagewerkzeug (Inbusschlüssel)

Einrichtung und Montage

Assembly is straightforward and typically takes approximately 15 minutes. All necessary tools and hardware are included in the package. Follow the included instruction paper step-by-step for detailed guidance.

1. Packen Sie alle Komponenten aus und legen Sie sie auf eine saubere, weiche Unterlage, um Kratzer zu vermeiden.
2. Attach the casters to the chair base. Ensure they click securely into place.
3. Setzen Sie den Gasdruckfederzylinder in die mittlere Öffnung des Stuhlgestells ein.
4. Befestigen Sie den Sitzmechanismus mit den mitgelieferten Schrauben an der Unterseite des Sitzkissens.
5. Place the seat assembly onto the gas lift cylinder.
6. Attach the backrest to the seat mechanism using the designated screws.
7. Install the armrests to the seat and backrest as per the instructions.
8. Befestigen Sie die Kopfstütze oben an der Rückenlehne.
9. Slide the footrest assembly into its designated slot under the seat.
10. Vor der Benutzung prüfen Sie bitte, ob alle Verbindungen fest sitzen und der Stuhl stabil steht.

For visual guidance, refer to the detailed installation manual (PDF) available online or the included instruction paper.

Bedienungsanleitung

Your Qulomvs office chair offers multiple adjustments for personalized comfort and ergonomic support.

1. Sitzhöhenverstellung

To adjust the seat height (from 17.9" to 20.2"):

• To raise the seat: While standing, pull the AUFZUG lever (right lever) upwards. The seat will rise. Release the lever at the desired height.
• To lower the seat: While seated, pull the AUFZUG lever (right lever) upwards. The seat will lower. Release the lever at the desired height.

Figure 2: Chair dimensions and maximum height/weight capacity. Max height 74.8", Max weight 300lbs. Seat height adjustable from 17.9" to 20.2".

2. Backrest Recline and Tilt Lock

The backrest can recline from 90 to 135 degrees. To adjust the recline:

• To recline: Pull the NEIGUNG handle (left lever) outwards to unlock the backrest. Lean back to the desired angle. Push the handle inwards to lock the backrest in position.
• To return to upright position: Pull the NEIGUNG handle outwards, lean forward slightly, and then push the handle inwards to lock.

Figure 3: Illustration of the chair's recline function (90-135 degrees) and the tilt and lift levers.

3. Einstellung der Lordosenstütze

The lumbar support can be adjusted vertically to provide optimal support for your lower back.

• Locate the lumbar support knob or lever on the back of the chair.
• Adjust it up or down to find the position that best supports the natural curve of your spine.

Figure 4: Close-up of the adjustable lumbar support mechanism on the chair's backrest.

4. Einstellung der Kopfstütze

The headrest can be adjusted up and down to support your neck and head.

• Grasp the headrest and gently pull it up or push it down to your preferred height.

Figure 5: Illustration of the adjustable headrest for neck and head support.

5. Bedienung der Fußstützen

The retractable footrest provides additional comfort for reclining or resting your legs.

• To extend the footrest: Pull the footrest out from under the seat.
• To retract the footrest: Push the footrest back under the seat until it is fully stored.

Figure 6: The chair with its footrest extended, demonstrating its use for relaxation.

6. 360-Degree Swivel and Rolling Casters

The chair features a 360-degree swivel function and smooth-rolling casters for easy movement around your workspace.

• The chair can rotate freely in any direction.
• The casters are designed for smooth movement on hard floors.

Figure 7: Detail of the chair's heavy-duty metal base, high-quality gas lift, and smooth 360-degree rotating casters.

7. Armrest Functionality

The armrests are designed to provide support and can be flipped up or down to suit your preference or to save space.

• To raise the armrests: Gently lift the armrests upwards until they lock into a vertical position.
• To lower the armrests: Release the lock (if applicable, or simply push down) and lower the armrests to a horizontal position.

Wartung

Die richtige Pflege verlängert die Lebensdauer und erhält das Aussehen Ihres Stuhls.

• Reinigung: Mit Anzeige abwischenamp cloth. Avoid harsh chemicals or abrasive cleaners. For mesh areas, a soft brush can be used to remove dust.
• Inspektion: Überprüfen Sie regelmäßig alle Schrauben und Bolzen auf festen Sitz. Ziehen Sie sie gegebenenfalls nach, um Stabilität und Sicherheit zu gewährleisten.
• Rollen: Um ein reibungsloses Rollen zu gewährleisten, sollten die Rollen frei von Haaren und Schmutz sein.
• Lagerung: Store the chair in a dry, cool environment away from direct sunlight to prevent material degradation.

Fehlerbehebung

Sollten Sie Probleme mit Ihrem Stuhl haben, beachten Sie bitte die folgenden häufigen Probleme und Lösungen:

Technische Daten

• Marke: Qulomvs
• Modellname: C008
• Farbe: Creme Weiß
• Material: Mesh (backrest), Foam (seat)
• Rahmenmaterial: Aluminium
• Produktabmessungen (Tiefe x Breite x Höhe): 25.2" x 25.2" x 46.2"
• Sitzhöhe: Verstellbar von 17.9" bis 20.2"
• Sitztiefe: 20.1 Zoll
• Breite der Stuhllehne: 20.08 Zoll
• Maximale Gewicht Empfehlung: 300 Pfund
• Merkmale: Adjustable Headrest, Adjustable Height, Foot Rest, Reclining (90-135 degrees), Rolling, 360-degree Swivel
• Montage: Required, easy to follow instructions included
• Empfohlene Verwendung: Office, Indoor

Garantie und Support

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official Qulomvs website. Please have your model number (C008) and purchase date available when contacting support.