Shuttle XPC Slim DH610 Barebone PC Instruction Manual

1. Einleitung

This manual provides essential instructions for the setup, operation, maintenance, and troubleshooting of your Shuttle XPC Slim DH610 Barebone PC. The DH610 is a compact and versatile barebone system designed to support Intel 12th and 13th Generation LGA1700 processors, offering robust performance for various applications including office, digital signage, and kiosks.

2. Sicherheitshinweise

Bitte lesen und befolgen Sie diese Sicherheitshinweise, um Schäden am Gerät oder Verletzungen zu vermeiden:

• Always disconnect the power cord before performing any installation or maintenance.
• Ensure the system is placed on a stable, flat surface with adequate ventilation.
• Setzen Sie das Gerät weder Feuchtigkeit noch extremen Temperaturen oder direkter Sonneneinstrahlung aus.
• Only use the power adapter provided or an approved equivalent.
• Refer to qualified service personnel for any repairs not covered in this manual.

3. Packungsinhalt

Überprüfen Sie, ob alle Artikel in Ihrem Paket vorhanden sind:

• Shuttle XPC Slim DH610 Barebone PC Unit
• VESA-Montagesatz
• Netzteil und Kabel
• Accessory Pack (screws, cables, etc.)
• Kurzanleitung (falls enthalten)

4. Einrichtung und Installation

The Shuttle DH610 is a barebone system, requiring the installation of a CPU, RAM, and storage devices before operation.

4.1. Opening the Chassis

Carefully remove the chassis cover to access the internal components. Typically, this involves unscrewing a few screws on the rear or sides of the unit and sliding the cover off.

Image: The Shuttle XPC Slim DH610 with its top cover removed, showing the internal layout including cooling fans and the motherboard.

4.2. CPU-Installation

The DH610 supports Intel 12th/13th Generation Alder Lake-S LGA1700 processors with a maximum TDP of 65W. Ensure your chosen CPU has integrated graphics, as the system does not support F-series processors without integrated graphics or K-series processors.

1. Öffnen Sie den Hebel des CPU-Sockels und entfernen Sie die Schutzabdeckung.
2. Carefully align the CPU with the socket, matching the triangular markers.
3. Setzen Sie die CPU vorsichtig in den Sockel ein, ohne sie mit Gewalt einzusetzen.
4. Schließen Sie den Sockelhebel, um die CPU zu sichern.
5. Installieren Sie den CPU-Kühler gemäß den Anweisungen des Herstellers.

Bild: Eine detaillierte view of the Shuttle DH610 motherboard, highlighting the LGA1700 CPU socket, RAM slots, and other integrated circuits.

Note: For 13th Gen Intel Processors, BIOS Version DH610000.202 or newer is required. Update BIOS if necessary after initial setup with a 12th Gen CPU or via a compatible method.

4.3. RAM-Installation

The system features two 260-pin dual-channel DDR4 SODIMM slots, supporting up to 64GB (2x 32GB) at 3200MHz. Dual-channel memory is recommended for optimal performance.

1. Locate the SODIMM slots on the motherboard.
2. Richten Sie die Kerbe am RAM-Modul an der Kerbe im Steckplatz aus.
3. Insert the module at a 45-degree angle and push down until the clips on both sides snap into place.

4.4. Speicherinstallation

The DH610 supports one 2.5-inch HDD/SSD and one M.2 2280 SSD.

1. 2.5" Drive: Mount the 2.5" HDD/SSD into the designated bay using the provided screws and connect the SATA data and power cables.
2. M.2-SSD: Insert the M.2 2280 SSD into its slot, securing it with the provided screw.

4.5. Peripheriegeräte anschließen

After installing internal components, reattach the chassis cover. Connect your peripherals to the available ports:

• Anzeige: Connect your monitor(s) to the HDMI 2.0b port or one of the two DisplayPort outputs. The system supports up to three 4K UHD displays.
• USB-Geräte: Use the four USB 3.2 Gen1 ports (including one Type-C) and four USB 2.0 ports for keyboard, mouse, and other USB devices.
• Netzwerk: Connect to your network using either of the two Gigabit Ethernet LAN ports (Intel 2.5GbE + Intel 1GbE).
• Serielle Geräte: Utilize the two RS232 COM ports for compatible devices.
• Audio: Connect headphones or a microphone to the front audio jacks.

Image: The front panel of the Shuttle DH610, featuring the power button, USB 3.2 Gen1 ports (one Type-C), and audio input/output jacks.

Image: The rear panel of the Shuttle DH610, displaying the DC-IN power input, HDMI, two DisplayPort outputs, two LAN ports, USB ports, and two COM ports.

4.6. Stromanschluss

Connect the power adapter to the DC-IN port on the rear of the unit, then plug the power cord into an electrical outlet.

5. Bedienungsanleitung

5.1. Ein-/Ausschalten

• Einschalten: Drücken Sie den Netzschalter auf der Vorderseite.
• Ausschalten: Perform a graceful shutdown through your operating system. Alternatively, press and hold the power button for 4-5 seconds for a forced shutdown (use only when necessary).

5.2. Installation des Betriebssystems

The DH610 is compatible with Windows 11/10 (64-bit) and Linux (64-bit) operating systems. Follow the standard installation procedures for your chosen OS. Ensure all necessary drivers are installed for optimal performance, which can typically be found on the Shuttle support webWebsite.

5.3. BIOS/UEFI-Zugriff

Um auf das BIOS/UEFI-Setup-Dienstprogramm zuzugreifen, drücken Sie die Taste Löschen or F2 key repeatedly during system startup. This allows configuration of boot options, system settings, and hardware parameters.

6. Wartung

6.1. Reinigung

Regularly clean the exterior of the unit with a soft, dry cloth. Use compressed air to clear dust from ventilation openings to ensure proper airflow and prevent overheating. Do not use liquid cleaners directly on the device.

6.2. BIOS-Updates

Periodically check the Shuttle website for BIOS updates. BIOS updates can improve system stability, add support for new hardware (like 13th Gen Intel CPUs), and fix bugs. Follow the instructions provided with the BIOS update package carefully.

7. Fehlerbehebung

If you encounter issues with your DH610, refer to the following common problems and solutions:

• Keine Anzeigeausgabe:
  • Ensure the monitor is powered on and correctly connected to the HDMI or DisplayPort.
  • Verify that the CPU has integrated graphics and that the display cable is connected to the motherboard's video output, not a discrete graphics card (if applicable).
  • Versuchen Sie es mit einem anderen Displaykabel oder Monitor.
• System schaltet sich nicht ein:
  • Check that the power adapter is securely connected to both the unit and the electrical outlet.
  • Ensure the CPU and RAM are correctly installed and seated.
  • Testen Sie die Steckdose mit einem anderen Gerät.
• 13th Gen CPU Not Recognized:
  • The system requires BIOS Version DH610000.202 or newer for 13th Gen Intel processors. If you have an older BIOS, you may need to install a 12th Gen CPU first to update the BIOS.
• Systemüberhitzung:
  • Ensure the chassis ventilation holes are not obstructed.
  • Clean any dust accumulation from the internal fans and heatsinks.
  • Verify the CPU cooler is properly installed and making good contact with the CPU.

8. Spezifikationen

9. Garantie und Support

9.1. Herstellergarantie

The Shuttle XPC Slim DH610 Barebone PC comes with a 3-Year Manufacturer's Warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

9.2. Technischer Support

For technical assistance, driver downloads, BIOS updates, or further troubleshooting not covered in this manual, please visit the official Shuttle website or contact Shuttle customer support. Free lifetime technical support is typically provided by the manufacturer.

Weitere Informationen finden Sie unter: www.shuttle.com