1. Einleitung
Thank you for choosing the Flysky FS-i6X 10-Channel 2.4GHz RC Transmitter and X6B Receiver. This system utilizes Flysky's Automatic Frequency Hopping Digital System Second Generation (AFHDS 2A) protocol, providing reliable and interference-free control for various RC models, including fixed-wing aircraft, gliders, helicopters, and multi-rotors. This manual provides essential information for the proper setup, operation, and maintenance of your RC system.
2. Packungsinhalt
Please inspect the package contents to ensure all items are present and undamaged:
- Flysky FS-i6X 10-Channel 2.4GHz Transmitter
- Flysky X6B i-BUS Receiver
- Bindungsstecker
- Benutzerhandbuch (dieses Dokument)
3. Einrichtung
3.1 Installation der Senderbatterie
The FS-i6X transmitter requires four (4) AA batteries (1.5V each) for operation. Ensure correct polarity when inserting the batteries.
- Öffnen Sie die Batteriefachabdeckung auf der Rückseite des Senders.
- Insert four 1.5V AA batteries, observing the polarity markings (+/-).
- Schließen Sie den Batteriefachdeckel fest.
3.2 Receiver Connection (X6B)
The X6B receiver is designed for multi-rotor applications and supports PWM, PPM, and i-BUS outputs. Connect the receiver to your flight controller or servos as follows:
- PWM-Ausgang: Connect individual servos or ESCs to channels 1-6 on the receiver.
- PPM-Ausgang: Connect the PPM output port to your flight controller's PPM input. This provides 8 channels over a single wire.
- i-BUS-Ausgang: Connect the i-BUS port to your flight controller's serial input. This provides 18 channels and telemetry data over a single wire.
Bild: Flysky X6B i-BUS Receiver board. This image shows the compact blue circuit board of the X6B receiver, featuring dual antennas for improved signal reception, and clearly labeled ports for PPM, i-BUS, and individual PWM channels (CH1-CH6) for connecting to a flight controller or servos.
3.3 Sender und Empfänger verbinden
Binding is the process of linking the transmitter to the receiver, allowing them to communicate exclusively. Ensure both devices are powered off before starting.
- Insert the binding plug into the 'BIND' port on the X6B receiver.
- Schließen Sie den Empfänger an die Stromversorgung an. Die LED des Empfängers sollte schnell blinken und damit anzeigen, dass er sich im Bindungsmodus befindet.
- While holding down the 'BIND' button on the FS-i6X transmitter, power on the transmitter.
- The transmitter's screen should display 'Binding...' or similar. Release the 'BIND' button on the transmitter once the binding process begins.
- Once the receiver's LED turns solid, the binding is complete.
- Schalten Sie sowohl den Empfänger als auch den Sender aus.
- Entfernen Sie den Bindungsstecker vom Empfänger.
- Power on the transmitter first, then the receiver. The receiver's LED should now be solid, indicating a successful connection.
4. Bedienungsanleitung
4.1 Ein-/Ausschalten
To power on the transmitter, press and hold the power button until the LCD screen illuminates. To power off, press and hold the power button again until the screen turns off.
4.2 Senderaufbau und Bedienelemente
Bild: Flysky FS-i6X RC Transmitter front view. This image displays the front of the FS-i6X transmitter, highlighting its dual stick controls (gimbals), various switches (SWD, SWC, SWB, SWA), rotary knobs (VRB, VRA), and the central LCD screen for menu navigation and displaying flight data.
The FS-i6X transmitter features two primary control sticks (gimbals), several switches, and rotary knobs for controlling your RC model. The LCD screen and navigation buttons allow access to the system's settings.
- Linker Stick (Modus 2): Controls Throttle (vertical) and Rudder (horizontal).
- Rechter Stick (Modus 2): Controls Elevator (vertical) and Aileron (horizontal).
- Schalter (SWA, SWB, SWC, SWD): Typically used for flight modes, gear, or auxiliary functions.
- Rotary Knobs (VRA, VRB): Used for fine-tuning or proportional control of auxiliary channels.
- LCD Bildschirm: Displays current settings, telemetry data, and menu options.
- Navigationstasten: Dient zur Navigation durch Menüs und zum Anpassen von Einstellungen.
4.3 Menünavigation und Einstellungen
Use the 'OK' button to enter the main menu and the 'UP'/'DOWN' buttons to scroll through options. The 'CANCEL' button typically returns to the previous screen or exits the menu.
- Systemkonfiguration: Configure model type, channel assignments, and system settings.
- Funktionen: Adjust sub-trims, endpoints, dual rates, and exponential settings.
- Anzeige: Monitor channel outputs and telemetry data (if available and configured).
5. Wartung
Proper maintenance ensures the longevity and reliable performance of your Flysky FS-i6X system.
- Reinigung: Reinigen Sie Sender und Empfänger mit einem weichen, trockenen Tuch. Vermeiden Sie die Verwendung von Lösungsmitteln oder Scheuermitteln.
- Lagerung: Store the transmitter and receiver in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries from the transmitter if storing for extended periods.
- Antennenpflege: Ensure the receiver antennas are not bent sharply or damaged. For optimal performance, position them at a 90-degree angle to each other.
- Firmware-Updates: Überprüfen Sie regelmäßig die offizielle Flysky-Website. website for firmware updates for your FS-i6X transmitter. Updates can improve performance and add new features. The FS-i6X supports online updates.
6. Fehlerbehebung
If you encounter issues with your FS-i6X system, refer to the following common problems and solutions:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Der Sender lässt sich nicht einschalten. | Defekte oder falsch eingesetzte Batterien. | Batterien austauschen oder Polarität prüfen. |
| Receiver LED is flashing rapidly. | Receiver is in binding mode or not bound. | Führen Sie das Bindungsverfahren durch (Abschnitt 3.3). |
| Keine Regelungsreaktion des Modells. | Receiver not bound, incorrect wiring, or power issue. | Verify binding, check all connections, ensure receiver has power. |
| Short control range or signal loss. | Damaged antennas, interference, or low transmitter battery. | Check antenna condition and placement, avoid crowded 2.4GHz environments, replace transmitter batteries. |
| Geringe Lautstärketage warning on transmitter. | Transmitter batteries are low. | Tauschen Sie die Batterien des Senders umgehend aus. |
7. Spezifikationen
7.1 Flysky FS-i6X RC Transmitter
| Besonderheit | Spezifikation |
|---|---|
| Kanäle | 6-10 (Standard 6) |
| Modelltyp | Fixed-wing / Glider / Helicopter |
| HF-Bereich | 2.408 bis 2.475 GHz |
| HF-Leistung | < 20 dBm |
| HF-Kanäle | 135 |
| Bandbreite | 500 kHz |
| 2.4GHz System | AFHDS 2A / AFHDS |
| Modulation | GFSK |
| Stick-Auflösung | 4096 |
| Niedrige Lautstärketage Warnung | < 4.2 V |
| DSC-Port | PS/2-Port PPM |
| Antennenlänge | 26 mm (Doppelantenne) |
| Gewicht | 392g |
| Leistung | 6 V DC (4 x 1.5 V AA-Batterien) |
| Anzeige | STN Transflective LCD, 128x64 Lattice, VA 73x39mm, with white backlight |
| Größe | 174 × 89 × 190 mm |
| Online-Update | Ja |
| Farbe | Schwarz |
| Zertifikate | CE0678, FCC-ID: N4ZFLYSKYI6X |
7.2 Flysky X6B i-BUS Receiver
| Besonderheit | Spezifikation |
|---|---|
| Markenname | Flysky |
| Artikel | X6B i-BUS-Empfänger |
| Kanäle | 6 (PWM), 8 (PPM), 18 (i-BUS) |
| Modelltyp | Multirotor |
| HF-Bereich | 2.408 ~ 2.475 GHz |
| Bandbreite | 500 kHz |
| Bands | 135 |
| HF-Leistung | Weniger als 20 dBm |
| Empfangsempfindlichkeit | -95 dBm |
| 2.4-GHz-Protokoll | AFHDS 2A |
| Modulation | GFSK |
| Stick-Auflösung | 1024 |
| Niedrige Lautstärketage-Alarm | Ja |
| DSC-Port | PPM / PWM / i-BUS |
| Antennenlänge | 93 mm (Doppelantenne) |
| Leistungsaufnahme | 4.0 bis 8.4 V |
| Online-Update | Ja (kabellos) |
| Reichweite | >300 m |
| Gewicht | 4.5g |
| Größe | 36 × 22 × 7.5 mm |
| i-BUS-Anschluss | Ja |
| Zertifikate | CE0678, FCC-ID: N4ZX6B00 |
Note: The FS-i6X transmitter is also compatible with other Flysky receivers such as FS-iA6B, FS-iA10B, and FS-A8S, which may have different specifications. This manual focuses on the X6B receiver included with this specific product variant.
8. Garantie und Support
For warranty information and technical support, please refer to the documentation provided by your retailer or contact Flysky customer service directly. Keep your proof of purchase for warranty claims.
