CHASING MINI S Upgrade Unterwasserdrohne Bedienungsanleitung

1. Einleitung

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your CHASING MINI S Upgraded Underwater Drone. Please read this manual thoroughly before first use to ensure proper handling and to maximize the drone's performance and longevity.

Das CHASING MINI S is an advanced underwater remotely operated vehicle (ROV) designed for exploration, photography, and various underwater tasks. It features a 4K UHD camera with EIS, extended dive depth, and anti-stuck motor technology.

2. Produktüberschreitungview und Komponenten

Das CHASING MINI S system includes the underwater drone, a remote controller, and a carrying case. Additional accessories such as mechanical arms and action cameras can be attached.

3. Installationsanleitung

3.1 Auspacken und erste Inspektion

Carefully remove all components from the packaging. Inspect the drone, remote controller, and cables for any visible damage. Ensure all listed components are present.

3.2 Anschließen des Controllers

The remote controller connects to your mobile phone or tablet via a data cable for stable signal transmission. This wired connection ensures reliability and does not interfere with your mobile network.

3.3 Einlegen der Micro-SD-Karte

The drone supports a removable 64GB Micro SD card for storing captured media. Locate the SD card slot, typically sealed with a waterproof cap, and insert the card as directed in the quick start guide.

3.4 Charging the Drone and Controller

Before first use, fully charge both the drone and the remote controller. Use the provided charger, which features two cables to charge both devices simultaneously. A full charge provides approximately 2-3 hours of normal use, extending up to 4 hours in low-flow water conditions.

4. Bedienungsanleitung

4.1 Basic Controls and Movement

Das CHASING MINI S can dive to a maximum depth of 330 feet (100 meters) and has a maximum horizontal shooting radius of 660 feet. Its maximum speed is 4 knots (2 m/s). Use the remote controller to navigate the drone horizontally and vertically.

4.2 Camera Operation and Features

The drone is equipped with a 4K UHD camera (1/2.3 SONY CMOS) with EIS (Electronic Image Stabilization) and an F1.8 large aperture. It provides 4K and 1080P video recording and 12-megapixel photos. Two 1200 lumen LED lights illuminate underwater environments for clear imaging.

4.3 Anti-Stuck Motor Technology

Das CHASING MINI S features patented anti-stuck motor technology, allowing it to operate safely and move freely even in complex underwater environments with sand or debris, reducing the risk of motor blockage.

4.4 User-Friendly Interaction via APP

The dedicated mobile application provides a user-friendly interface for controlling the drone and accessing various features. It allows for real-time monitoring of depth and temperature, live streaming, social media sharing, time-lapse photography, and quick material editing. HDMI output is also supported.

5. Anbaugeräte und Zubehör

Das CHASING MINI S supports the attachment of various accessories to enhance its functionality. This includes mechanical arms for retrieving objects and mounts for additional action cameras, allowing for higher pixel video requirements.

The product also comes with a waterproof backpack for easy transport of the drone and all its accessories.

6. Wartung

6.1 Reinigung nach dem Gebrauch

After each use, especially in saltwater, it is crucial to thoroughly clean the drone. Rinse the drone with fresh water, paying close attention to the thrusters and any moving parts, to prevent salt buildup and corrosion. Operating the drone in a freshwater basin for a few minutes after saltwater use can help flush out residual salt.

6.2 Batteriepflege

To prolong battery life, avoid fully discharging the battery frequently. Store the drone and controller with a partial charge (around 50-60%) if not used for extended periods. Recharge fully before each mission.

6.3 Speicherung

Store the drone and its accessories in the provided carrying case in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure all components are dry before storage.

7. Fehlerbehebung

7.1 Remote and ROV Link Issues

If the remote controller and ROV do not link up or the drone does not emit the expected beeps upon power-on, ensure all cables are securely connected. Verify that both the drone and controller are sufficiently charged. Restart both devices and attempt to reconnect.

7.2 Thruster Malfunction

If a thruster stops working, first check for any visible obstructions such as debris or seaweed. Clean the thruster area thoroughly. If the issue persists, it may indicate an internal problem requiring professional service.

7.3 Motors Seizing in Saltwater

While the drone is designed for underwater use, prolonged exposure to saltwater without meticulous cleaning can lead to motor seizing. Always perform a thorough freshwater rinse and flush after saltwater dives to prevent this issue.

7.4 Probleme mit der App-Verbindung

If experiencing issues with the mobile application, ensure your device's operating system is up to date and the CHASING app is the latest version. Check your device's USB connection settings. If problems persist, try reinstalling the app.

8. Spezifikationen

9. Garantie und Support

9.1 Garantieinformationen

Please refer to the warranty card included with your product for detailed warranty terms and conditions. Typically, the manufacturer provides a limited warranty covering defects in materials and workmanship under normal use.

9.2 Kundendienst

For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact CHASING customer support through their official webSie können auch die Website oder die auf Ihrer Produktverpackung angegebenen Kontaktinformationen besuchen. Chasing Store on Amazon für weitere Informationen.