JIARUIXIN CSR-12T-1B 12V 2.4G Bluetooth Remote Control and Receiver Kit Instruction Manual

1. Einleitung

This manual provides instructions for the installation, operation, and maintenance of the JIARUIXIN CSR-12T-1B 12V 2.4G Bluetooth Remote Control and Receiver Kit. This kit is designed as a replacement part for children's electric riding cars, enabling remote control functionality.

1.1. Produktkompatibilität

To ensure compatibility, open your electric ride-on car and visually inspect the existing control box. If the appearance of the control box matches the CSR-12T-1B model shown in this manual, this replacement part should be compatible with your vehicle. Pay close attention to the connectors to ensure they match your car's wiring harness.

Abbildung 1: Oben view of the CSR-12T-1B 12V Control Box. This image displays the main control unit with its identification label, operating voltage (DC12V), and maximum working current (25A MAX).

Abbildung 2: Schräg view of the CSR-12T-1B 12V Control Box. This perspective highlights the various connectors for wiring into the electric riding car's system.

1.2. Packungsinhalt

Das Paket beinhaltet typischerweise:

• 1 x CSR-12T-1B 12V Control Box
• 1 x 2.4G Bluetooth Remote Control

2. Einrichtung und Installation

Installation of the control box requires basic electrical knowledge and careful attention to wiring. If you are unsure, consult a qualified technician.

2.1. Control Box Installation

1. Sicherheit geht vor: Disconnect the battery from the electric riding car before beginning any installation.
2. Locate Existing Control Box: Open the body of the electric riding car to access the existing control box.
3. Verkabelung trennen: Carefully disconnect all wiring harnesses from the old control box. Note the position of each connector if possible, or take photos for reference.
4. Alte Steuereinheit entfernen: Unmount the old control box from its position.
5. Install New Control Box: Mount the new CSR-12T-1B control box in the same location.
6. Verkabelung anschließen: Reconnect all wiring harnesses to the new control box. Ensure all connections are secure and match the original configuration.
7. Batterie wieder anschließen: Once all connections are secure, reconnect the car's battery.

2.2. Remote Control Pairing (Frequency Matching)

The remote control must be paired with the receiver kit for the first use or after replacing the remote control's batteries.

1. Auto einschalten: Turn on the electric riding car.
2. Kopplung einleiten: Press and hold the "M" button (or similar pairing button, if present) on the remote control for approximately 3-5 seconds. The indicator light on the remote control should start flashing.
3. Observe Car: The car's lights or other indicators may flash or make a sound to confirm successful pairing.
4. Testfunktionalität: Release the button and test the remote control's functions (forward, backward, turning) to ensure it is paired correctly.

3. Bedienungsanleitung

The 2.4G Bluetooth remote control allows parents to safely operate the electric riding car. Familiarize yourself with the button functions:

Figure 3: JIARUIXIN 2.4G Bluetooth Remote Control. This image shows the remote control with all its buttons clearly labeled for their respective functions.

• Vorwärts-Taste: Bewegt das Auto vorwärts.
• Zurück-Schaltfläche: Bewegt das Auto rückwärts.
• Turn Left Button: Steers the car to the left.
• Turn Right Button: Steers the car to the right.
• Speed Selection Button (S): Adjusts the speed of the car (e.g., low, medium, high). Press to cycle through available speeds.
• Emergency Braking Button (P): Immediately stops the car. Pressing this button will override other commands and bring the car to a halt.

Abbildung 4: Oben view of the JIARUIXIN 2.4G Bluetooth Remote Control. This image provides a clear view of the remote's ergonomic design and button layout.

4. Wartung

Proper maintenance ensures the longevity and reliable operation of your control kit.

• Reinigung: Wipe the control box and remote control with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
• Lagerung: Store the components in a dry place, away from direct sunlight and extreme temperatures.
• Batteriewechsel (Fernbedienung): If the remote control's range decreases or it becomes unresponsive, replace its batteries. Refer to the remote control's battery compartment for the correct battery type and orientation.
• Verkabelungsprüfung: Periodically check all wiring connections to the control box for any signs of wear, corrosion, or looseness. Ensure they are securely fastened.

5. Fehlerbehebung

If you encounter issues with your CSR-12T-1B kit, refer to the following common troubleshooting steps:

• Fernbedienung reagiert nicht:
  • Ensure the electric riding car is powered on.
  • Check the remote control's batteries and replace them if necessary.
  • Perform the remote control pairing (frequency matching) procedure again as described in Section 2.2.
  • Ensure there are no obstructions or strong interference sources between the remote control and the car.
• Auto bewegt sich nicht:
  • Verify the car's main power switch is ON.
  • Check the car's battery charge level.
  • Stellen Sie sicher, dass alle Kabelverbindungen zum Schaltkasten fest sitzen.
  • Confirm the remote control is paired correctly.
• Intermittierender Betrieb:
  • Überprüfen Sie, ob die Kabelverbindungen lose sind.
  • Ensure the remote control batteries are not low.
  • Avoid operating near other 2.4Ghz devices that might cause interference.

Sollten die Probleme nach Durchführung dieser Schritte weiterhin bestehen, wenden Sie sich bitte an den Kundendienst.

6. Spezifikationen

7. Garantie und Support

Specific warranty information for this product is not provided in the available documentation. For warranty claims or technical support, please contact the seller or manufacturer directly through the platform where the product was purchased.

Manufacturer: JIARUIXIN