AmScope M162C-2L-PB10 Student Microscope Instruction Manual

Einführung

This manual provides detailed instructions for the proper setup, operation, maintenance, and troubleshooting of your AmScope M162C-2L-PB10 Student Microscope. This optical glass monocular microscope features both top and bottom LED lights, offering versatile illumination for various specimens. It provides five wide-field magnification settings: 40X, 100X, 250X, 400X, and 1000X, making it suitable for a range of educational and observational needs. The sturdy metal frame ensures durability, while coaxial coarse and fine focusing mechanisms allow for precise adjustments.

Figure 1: AmScope M162C-2L-PB10 Student Microscope, showcasing dank seiner robusten Konstruktion und seiner Schlüsselkomponenten.

Lieferumfang

Prüfen Sie beim Auspacken, ob alle folgenden Komponenten vorhanden sind:

• AmScope M162C-2L-PB10 Monocular Microscope
• Eyepieces (typically 10X and 25X for varied magnification)
• Objective Lenses (4X, 10X, 40X)
• Netzteil
• 3 AA Batteries (for portable use)
• 5 Prepared Glass Slides
• 5 Blank Glass Slides
• 1 Plastic Slide Case
• Staubschutzhülle
• Accessory Kit (may include tweezers, dropper, etc.)
• Bedienungsanleitung

Figure 2: Included prepared and blank slides, along with a protective plastic case.

Aufstellen

1. Auspacken: Nehmen Sie alle Komponenten vorsichtig aus der Verpackung. Bewahren Sie die Verpackung für die spätere Lagerung oder den Transport auf.
2. Platzierung: Place the microscope on a stable, flat surface away from direct sunlight, high temperatures, dust, and vibrations.
3. Stromanschluss:
   • Wechselstromversorgung: Connect the AC power adapter to the microscope's power input jack and then plug it into a standard electrical outlet.
   • Batterieleistung: Open the battery compartment (usually located at the base) and insert 3 AA batteries, ensuring correct polarity. This allows for portable use.
4. Okularmontage: Insert the desired eyepiece (e.g., 10X or 25X) into the top of the monocular head.
5. Staubschutzhülle: Wenn das Mikroskop nicht in Gebrauch ist, decken Sie es mit der mitgelieferten Staubschutzhülle ab, um es vor Staub und Schmutz zu schützen.

Bedienungsanleitung

1. Einschalten: Flip the power switch (usually located at the base) to turn on the illumination.
2. Beleuchtungsauswahl:
   • Unteres Licht: Use for transparent specimens (e.g., prepared slides). Adjust the intensity using the dimmer control.
   • Oberes Licht: Use for opaque specimens (e.g., leaves, insects). Adjust the intensity using the dimmer control.
3. Platzierung eines Exemplars: Place a prepared slide or your own specimen on the stage. Secure it with the stage-Clips.
4. Vergrößerung auswählen: Rotate the revolving nosepiece to select the lowest power objective lens (e.g., 4X). This provides the widest field of view and makes initial focusing easier.
5. Fokussierung:
   • Schauen Sie durch das Okular.
   • Verwenden Sie die Grobfokussierknopf (larger knob) to bring the specimen into approximate focus. Turn it slowly to raise or lower the stage.
   • Sobald das Zielen grob fokussiert ist, verwenden Sie die Feinfokussierknopf (smaller knob) for precise, sharp focusing.
6. Adjusting Diaphragm: The single lens condenser with a 6-hole disc diaphragm controls the amount of light passing through the specimen. Rotate the disc to adjust the aperture size, optimizing contrast and resolution for your specimen.
7. Erhöhungasing Magnification: Once focused at low power, rotate the revolving nosepiece to a higher power objective lens (e.g., 10X, 40X). Re-adjust focus using only the fine focus knob. For 1000X magnification, use the 100X objective with the 10X eyepiece, or 40X objective with 25X eyepiece.

Figure 3: Demonstrating the use of focus knobs for clear specimen viewing.

Offizielles Produktvideo

Video 1: Ein überview of the AmScope M162C-2L-PB10 microscope, highlighting its features and ease of use.

Wartung

• Linsenreinigung: Verwenden Sie ausschließlich spezielles Linsenreinigungspapier und Linsenreinigungsmittel. Wischen Sie die Linsenoberflächen vorsichtig ab. Vermeiden Sie es, die Linsen mit bloßen Fingern zu berühren.
• Reinigung des Körpers: Wischen Sie das Mikroskopgehäuse mit einem weichen, fusselfreien Tuch ab.amp Tuch. Verwenden Sie keine scharfen Chemikalien oder Scheuermittel.
• Lagerung: Always cover the microscope with the dust cover when not in use. Store in a dry, cool place.
• Batteriewechsel: If using battery power, replace all 3 AA batteries when the illumination dims significantly. Ensure correct polarity.

Fehlerbehebung

Technische Daten

• Modell: M162C-2L-PB10
• Vergrößerung: 40X, 100X, 250X, 400X, 1000X
• Okulare: 10X, 25X
• Objektivlinsen: 4x, 10x, 40x (achromatisch)
• Kopf: Monokular, 45 Grad geneigt, 360 Grad drehbar
• Beleuchtung: Dual LED (Top and Bottom)
• Fokussierung: Koaxialer Grob- und Feinfokus
• Stage: Einfaches Stage mit Stage-Clips
• Kondensator: Single Lens with 6-hole Disc Diaphragm
• Energiequelle: AC Adapter (240 Volts) or 3 AA Batteries
• Material: Metal Frame, Polycarbonate components
• Artikelgewicht: 6 Pfund

Garantie

The AmScope M162C-2L-PB10 Student Microscope is covered by a 5 Jahr Garantie. This warranty covers manufacturing defects and ensures the quality and durability of your product. Please retain your proof of purchase for warranty claims.

Unterstützung

For technical assistance, replacement parts, or further inquiries regarding your AmScope M162C-2L-PB10 microscope, please visit the official AmScope website or contact their customer support. Detailed contact information can typically be found on the product packaging or the AmScope brand store on Amazon.

AmScope Store Link: Besuchen Sie den AmScope Store