1. Einleitung
Thank you for choosing the FIERRG JQP Series Internal Aquarium Filter. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new aquarium filter. Please read these instructions thoroughly before use and retain them for future reference.
The FIERRG JQP Series Internal Aquarium Filter is a versatile 3-in-1 unit designed to provide silent, submersible filtration for your aquarium. It combines mechanical, biological, and chemical filtration to maintain clear and healthy water conditions for your aquatic environment.
2. Produktmerkmale
- Einfache Installation und Bedienung: Entwickelt für einfache Einrichtung und Bedienung.
- Effiziente Filtration: Features built-in double-layer filter cotton for effective removal of impurities.
- Durable and Quiet Operation: Engineered for a long working life with smooth, high-efficiency, and low-noise performance.
- Kompaktes Design: Mini size and lightweight construction ensure easy placement and handling.
3. Sicherheitshinweise
Always observe basic safety precautions to reduce the risk of fire, electric shock, and injury to persons.
- Lesen Sie alle Anweisungen sorgfältig durch, bevor Sie das Gerät verwenden.
- Stellen Sie sicher, dass die LautstärketagPrüfen Sie vor dem Anschließen, ob die auf dem Filter angegebene Spannung mit Ihrer lokalen Stromversorgung übereinstimmt.
- Never operate the filter if the power cord or plug is damaged.
- Do not attempt to repair the filter yourself. Refer all servicing to qualified personnel.
- Always unplug the filter from the power outlet before performing any maintenance, cleaning, or when handling the aquarium water.
- Ensure the filter is fully submerged in water during operation to prevent overheating.
- Halten Sie das Netzkabel von scharfen Gegenständen und heißen Oberflächen fern.
- This appliance is for indoor use only and should not be used in wet conditions outside the aquarium.
4. Packungsinhalt
Bitte überprüfen Sie nach dem Auspacken, ob alle Komponenten vorhanden und unbeschädigt sind:
- 1 x FIERRG JQP Series Internal Aquarium Filter Unit
- Filter Media (Sponge)
- Water Outlet Nozzle and Accessories
- Saugnäpfe zur Montage
5. Spezifikationen
The following table details the specifications for the JQP-2500F (35W) model and other variants in the JQP series:
Image showing the FIERRG JQP-2500F internal aquarium filter, highlighting its 35W power, 2.4m lift, 2500L/H flow, dimensions (96x75x380mm), 1.8m power cord, and suitability for tanks up to 120cm.
Table comparing different models in the FIERRG JQP series (JQP-500F, JQP-1000F, JQP-1500F, JQP-2500F) with their respective power, max lift, max flow, size, filter box quantity, and power cord length.
| Spezifikation | JQP-2500F (35W Model) |
|---|---|
| Modell | JQP-2500F |
| Leistung | 35 W |
| Max. Hub | 2.4 m |
| Maximaler Durchfluss | 2500 Liter/Stunde |
| Abmessungen (L x B x H) | 96 x 75 x 380 mm |
| Länge des Netzkabels | 1.8 m |
| Empfohlene Tankgröße | Bis zu 120 cm |
| Artikelgewicht | 800 Gramm |
| Stil | Tauchboot |
6. Einrichtungsanweisungen
- Auspacken: Nehmen Sie alle Komponenten vorsichtig aus der Verpackung. Prüfen Sie sie auf Beschädigungen.
- Filter zusammenbauen: Ensure the filter media (sponge) is correctly placed within the filter housing. Attach the water outlet nozzle to the pump head.
- Position im Aquarium: Submerge the filter completely in your aquarium water. Use the provided suction cups to securely attach the filter to the inside wall of the tank. Ensure the filter is positioned vertically and is stable. The water outlet should be above or slightly below the water surface to create aeration, or fully submerged for quieter operation.
- Strom anschließen: Once the filter is securely placed and fully submerged, plug the power cord into a suitable electrical outlet. Ensure a drip loop is formed with the power cord to prevent water from traveling along the cord to the outlet.
Eine detaillierte view of the upper part of the FIERRG internal aquarium filter, showing the pump housing and water outlet.
7. Bedienungsanleitung
- Erstinbetriebnahme: After plugging in, the filter pump will immediately begin to circulate water. Check for proper water flow from the outlet nozzle.
- Dauerbetrieb: The filter is designed for continuous operation to maintain water quality. It should run 24 hours a day, 7 days a week.
- Wasserstand: Always ensure the water level in the aquarium is sufficient to keep the filter fully submerged. Running the pump dry can cause damage.
The FIERRG internal aquarium filter actively filtering water in a fish tank, showing water circulation and aeration.
8. Wartung
Regelmäßige Wartung ist entscheidend für die optimale Leistung und Lebensdauer Ihres Filters.
- Stromversorgung trennen: Vor jeglichen Wartungsarbeiten muss der Filter vom Stromnetz getrennt werden.
- Filter aus dem Tank entfernen: Carefully detach the filter from the aquarium wall and remove it from the water.
- Filtermedien reinigen: Disassemble the filter housing to access the filter sponge. Rinse the sponge thoroughly with old aquarium water (from a water change) to preserve beneficial bacteria. Do not use tap water directly, as chlorine can kill these bacteria. Replace the filter sponge if it is heavily clogged or deteriorated.
- Laufrad reinigen: Remove the pump head cover and carefully extract the impeller. Rinse the impeller and its chamber to remove any debris, algae, or mineral buildup. Ensure the impeller spins freely.
- Wieder zusammenbauen und neu installieren: Reassemble all parts of the filter, ensuring they are securely fitted. Place the filter back into the aquarium, ensuring it is fully submerged, and then reconnect the power.
Wartungshäufigkeit: It is recommended to clean the filter media every 2-4 weeks, depending on the bioload of your aquarium. The impeller should be checked and cleaned every 1-2 months.
9. Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Filter does not start or stops working. | Keine Stromversorgung. Impeller jammed or dirty. Motorschaden. | Überprüfen Sie den Stromanschluss und die Steckdose. Unplug, remove, and clean the impeller and its chamber. Contact customer support if motor failure is suspected. |
| Niedriger Wasserdurchfluss. | Clogged filter media. Dirty impeller or pump chamber. Obstruction in outlet nozzle. | Filtermedien reinigen oder austauschen. Clean the impeller and pump chamber. Clear any blockages from the outlet nozzle. |
| Übermäßige Geräusche oder Vibrationen. | Impeller not seated correctly or damaged. Debris in impeller chamber. Filter not securely mounted. | Unplug, remove, and inspect the impeller for damage or misalignment. Clean chamber. Ensure filter is securely attached to the aquarium wall with suction cups. |
| Water is cloudy. | Filter media is saturated or ineffective. Insufficient filtration for tank size/bioload. New tank syndrome or bacterial bloom. | Clean or replace filter media. Consider more frequent maintenance. Ensure filter is appropriate for your tank size. Perform partial water changes. |
10. Garantie und Support
FIERRG is committed to providing high-quality products and customer satisfaction. While specific warranty details are not provided in this manual, please retain your proof of purchase. For any product concerns, technical assistance, or warranty inquiries, please contact the seller or manufacturer directly through your purchase platform.
We are dedicated to providing you with a satisfactory solution to address any concerns you may have.