Einführung
Thank you for choosing the ciciglow 6.7-inch Large LED Digital Alarm Clock. This device features a large display, multiple functions including time, alarm, and temperature, and user-friendly controls. This manual provides detailed instructions for proper setup, operation, and maintenance to ensure optimal performance.
Figure 1: Minimalist large screen LED clock design.
Figure 2: The 6.7-inch large screen LED clock with its multifunctional display and simple 5-button interface.
1. Einrichtung
1.1 Packungsinhalt
- 1 x ciciglow Digital Alarm Clock
- 1 x USB Power Cable (1.5m/4.9ft)
- 1 x Benutzerhandbuch
1.2 Einschalten des Geräts
Der Wecker kann auf zwei Arten mit Strom versorgt werden:
- USB-Netzteil (empfohlen für Dauerbetrieb):
Connect the provided USB power cable to the clock and a DC 5V USB power adapter (not included). When powered via USB, the display will remain continuously on. This mode also activates the time memory function, preventing loss of settings during power interruptions.
- Battery Power Supply (Power-saving mode):
Insert 3 AAA batteries (not included) into the battery compartment. In battery mode, the clock automatically enters power-saving mode after 20 seconds. The display will turn off automatically after 15 seconds of no operation to conserve battery life. To activate the display, tap the clock or make a sound above 60 decibels.
Figure 3: Illustration of power-saving mode when using batteries and the time memory function.
2. Bedienungsanleitung
2.1 Tastenfunktionenview
The clock features 5 control buttons, typically located on the top or back of the device, for easy operation.
2.2 Setting the Time and 12/24H Format
- Drücken Sie die MODUS Taste (oder gleichwertige Taste) zum Aufrufen des Zeiteinstellungsmodus.
- Verwenden Sie die UP Und RUNTER Tasten zum Einstellen von Stunden und Minuten.
- Drücken MODUS Um die Einstellung erneut zu bestätigen und zur nächsten zu gelangen.
- To switch between 12-hour and 24-hour display formats, locate the dedicated button (often labeled 12/24 Uhr) or cycle through options in time setting mode.
2.3 Alarme einstellen (Alarm 1 & Alarm 2)
Die Uhr unterstützt zwei unabhängige Alarmeinstellungen.
- Drücken Sie die ALARM button (or equivalent) to select Alarm 1 or Alarm 2.
- Verwenden Sie die UP Und RUNTER Tasten zum Einstellen der gewünschten Weckzeit.
- Drücken ALARM again to confirm and activate the alarm. An alarm icon will appear on the display.
- Um einen Alarm zu deaktivieren, drücken Sie die Taste ALARM Drücken Sie die Taste so lange, bis das Alarmsymbol verschwindet.
Figure 4: The clock displaying time with active alarm indicators, highlighting its silent operation and dual alarm capability.
2.4 Schlummerfunktion
When an alarm sounds, press any button (often the SCHLAFEN button, if present, or a main control button) to activate the snooze function. The alarm will pause for 5 minutes and then sound again. This can typically be repeated multiple times.
2.5 Temperaturanzeige
The clock features a built-in temperature and humidity sensing module for real-time indoor temperature monitoring. The temperature is displayed alongside the time. No specific action is usually required to activate this feature.
Figure 5: The clock displaying both time and real-time indoor temperature.
2.6 Voice Control Induction (Battery Mode Only)
When operating on battery power, the display can be activated by sound. If the ambient sound exceeds 60 decibels or the clock is tapped, the display will light up. This feature is designed to conserve battery life.
Figure 6: Demonstrating voice control induction where tapping or sound activates the display.
3. Wartung
3.1 Reinigung
To clean the clock, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the display or casing.
3.2 Batteriewechsel
If using battery power, replace all 3 AAA batteries when the display becomes dim or the clock functions erratically. Ensure correct polarity when inserting new batteries.
4. Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Display ist aus oder gedimmt (Batteriebetrieb) | Power-saving mode active; low batteries. | Tap the clock or make a sound to activate the display. Replace batteries if dimness persists. Consider using USB power for continuous display. |
| Uhr lässt sich nicht einschalten | No power source; incorrect battery insertion. | Ensure USB cable is securely connected to a working power source, or check that batteries are inserted correctly with proper polarity. |
| Der Alarm ertönt nicht | Alarm not set or deactivated; volume too low (if adjustable). | Verify alarm settings and ensure the alarm icon is displayed. (Note: This model is described as silent, so check for visual cues if no sound is expected). |
| Time/settings reset after power loss | Not using USB power; batteries removed or dead. | The time memory function works when USB powered. If using batteries, ensure they are fresh to maintain settings during brief power interruptions. |
5. Spezifikationen
- Modellnummer: ciciglowtv2zwmoi59
- Anzeigetyp: Digitale LED
- Bildschirmgröße: 6.7 Zoll
- Material: Acrylnitril-Butadien-Styrol (ABS)
- Farbe: Schwarz
- Energiequelle: DC 5V USB Cable (included) or 3 x AAA Batteries (not included)
- Besondere Merkmale: Temperature Display, Large Screen, Snooze Function, 12/24H Display, Time Memory Function, Voice Control Induction (battery mode)
- Produktabmessungen: ca. 17 x 7 x 4 cm
- Produktgewicht: Ungefähr 142 Gramm
- Konnektivitätstechnologie: USB
6. Garantie und Support
For warranty information or technical support, please refer to the retailer's return policy or contact the manufacturer directly through their official channels. Keep your purchase receipt for any warranty claims.