Pipishell PILTK4, PILF8
Pipishell TV Wall Mount Instruction Manual
Models: PILTK4 (Tilt Mount) & PILF8 (Full-Motion Mount)
Einführung
This instruction manual provides detailed guidance for the safe and proper installation, operation, and maintenance of your Pipishell TV Wall Mount. This product is designed to securely hold most 37-75 inch flat or curved televisions. Please read this manual thoroughly before beginning installation and retain it for future reference.
The manual covers two distinct models: the PILTK4 Low Profile Tilt TV Wall Mount and the PILF8 Full-Motion TV Wall Mount. Ensure you identify your specific model to follow the correct instructions.
Wichtige Sicherheitsinformationen
Failure to read and follow all instructions may result in personal injury, property damage, or voiding of warranty. If you have any questions, please contact Pipishell customer support.
- Gewichtskapazität: Do not exceed the maximum weight capacity of 132 lbs for PILTK4 or 100 lbs for PILF8.
- TV-Größe: Kompatibel mit Fernsehern von 37 bis 75 Zoll.
- Wandtyp: Mount only on 16" to 24" wood studs, concrete, or brick walls. Do not install on drywall alone.
- Professionelle Installation: Wenn Sie sich bezüglich des Installationsprozesses unsicher sind, konsultieren Sie einen qualifizierten Fachmann.
- Komponentenprüfung: Vor der Installation sicherstellen, dass alle Komponenten vorhanden und unbeschädigt sind. Beschädigte Teile dürfen nicht verwendet werden.
Packungsinhalt
Verify that all parts are included in your package. Refer to the parts list provided in your physical manual for specific quantities and identifiers.
This image displays both the low-profile tilt mount (top) and the full-motion articulating mount (bottom), along with included accessories such as cable ties and a small level. The tilt mount is a simpler, fixed-position bracket, while the full-motion mount features multiple arms for greater adjustability.
Setup und Installation
Checkliste vor der Installation
- Ensure your TV's weight and VESA pattern are within the mount's specifications.
- Identify your wall type (wood stud, concrete, or brick).
- Besorgen Sie sich die benötigten Werkzeuge (z. B. Bohrmaschine, Balkensucher, Wasserwaage, Schraubendreher).
- Have at least two people for installation, especially for larger TVs.
Step 1: Determine TV Compatibility (VESA Pattern)
Locate the four mounting holes on the back of your TV. Measure the horizontal and vertical distance between these holes to determine your TV's VESA pattern. This mount supports VESA patterns from 200x100mm to 600x400mm.
This diagram illustrates how to measure the horizontal and vertical distances between the mounting holes on the back of a television to determine its VESA pattern. It highlights the importance of checking VESA compatibility before installation.
Schritt 2: Befestigen Sie die TV-Halterungen am Fernseher
Carefully place your TV face down on a soft, clean surface. Attach the vertical TV brackets to the back of your TV using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are centered and securely fastened.
This image shows the full-motion TV mount, highlighting its robust construction and articulating arms. This type of mount allows for significant extension and retraction from the wall, as well as swivel and tilt adjustments.
Schritt 3: Installieren Sie die Wandplatte
Für Holzständer: Use a stud finder to locate the center of your wood studs. Mark the drilling locations. Drill pilot holes and secure the wall plate using the provided lag bolts and washers. Ensure the wall plate is level.
Für Beton-/Ziegelwände: Mark the drilling locations. Drill pilot holes using a masonry drill bit. Insert concrete anchors into the holes, then secure the wall plate using the provided lag bolts and washers. Ensure the wall plate is level.
This diagram illustrates the compatibility of the TV mount with different wall types: wood studs (16" to 24" spacing), concrete walls, and brick walls. It emphasizes that the mount should not be installed on drywall alone.
Schritt 4: Fernseher an der Wandplatte befestigen
With assistance, carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure the TV is securely seated on the wall plate. For the PILTK4 tilt mount, engage the pull cords to lock the TV in place. For the PILF8 full-motion mount, secure the safety screws.
This image displays the low-profile tilt TV mount, highlighting its slim design and the vertical brackets that attach to the TV. This mount allows for a fixed, close-to-wall installation with a slight tilt capability.
Operating Your TV Wall Mount
PILTK4 (Tilt Mount) Adjustments
- Neigungseinstellung: This mount allows for a downward tilt of up to 7 degrees to reduce glare. Loosen the tilt knobs on the side of the TV brackets, adjust to the desired angle, and then tighten the knobs to secure.
- Sicherheitsschlösser: The integrated pull cords allow you to easily lock or release the TV from the wall plate for added security or removal.
This image highlights the "Anti-Drop Edges" feature of the tilt mount, which are designed to prevent the TV from accidentally sliding off the wall plate, enhancing safety and stability.
This image demonstrates the "Handy Pull Cords" feature, which allows users to easily lock or release the TV from the wall mount, simplifying installation and removal.
This image emphasizes the "Strong Security Locks" feature, which ensures the TV is securely engaged with the mount, providing peace of mind after installation.
PILF8 (Full-Motion Mount) Adjustments
- Schwenken: The articulating arms allow for a smooth +/-45 degree swivel, enabling you to adjust the TV's viewBlickwinkel aus verschiedenen Positionen im Raum.
- Neigung: Adjust the tilt from +5 degrees to -15 degrees to optimize viewing and reduce glare. Loosen the tilt bolts, adjust, and re-tighten.
- Nivellierung: After installation, a +/-3 degree leveling adjustment is possible to ensure the TV is perfectly horizontal.
- Aus-/Einfahren: The mount can extend up to 15.4 inches from the wall for maximum flexibility and retract to a slim 3.2 inches to save space.
This image illustrates a television mounted using the full-motion bracket, demonstrating its swivel capability of +/-45 degrees for optimal viewing angles from different parts of a room.
This image demonstrates the extension and retraction capabilities of the full-motion TV mount, showing it can extend up to 15.4 inches from the wall for flexibility and retract to a compact 3.2 inches to save space.
This image highlights the "Stable Support" feature of the full-motion mount, emphasizing its stronger dual arms designed to enhance stability and securely hold the television.
Wartung
- Regelmäßige Inspektion: Überprüfen Sie regelmäßig alle Schrauben und Verbindungen, um sicherzustellen, dass sie fest und sicher sind.
- Reinigung: Reinigen Sie die Halterung mit einem weichen, trockenen Tuch. Vermeiden Sie die Verwendung von Scheuermitteln oder Lösungsmitteln.
- Lubrication (Full-Motion Mount): If the articulating arms become stiff, a small amount of silicone-based lubricant can be applied to the pivot points.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Der Fernseher steht nach der Installation nicht gerade. | Wall plate or TV brackets not perfectly level. | For PILF8, use the +/-3 degree leveling adjustment. For PILTK4, re-adjust the wall plate if necessary. |
| Das Gefährt wirkt instabil oder wackelt. | Screws are loose; incorrect wall type; TV exceeds weight capacity. | Tighten all screws. Ensure installation on appropriate wall type. Verify TV weight is within limits. |
| Der Fernseher passt nicht an die Halterung. | Falsches VESA-Muster oder falsche TV-Größe. | Verify your TV's VESA pattern and size against the mount's specifications (37-75 inches, VESA 200x100mm to 600x400mm). |
Produktspezifikationen
| Besonderheit | PILTK4 (Tilt Mount) | PILF8 (Full-Motion Mount) |
|---|---|---|
| Kompatibilität mit TV-Größen | 37-75 Zoll | 37-75 Zoll |
| Gewichtskapazität | Bis zu 132 Pfund | Bis zu 100 Pfund |
| VESA-Kompatibilität | 200 x 100 mm bis 600 x 400 mm | |
| Neigungswinkel | 7° nach unten | +5°/-15° |
| Schwenkwinkel | Nicht verfügbar (Festwert) | +/-45° |
| Nivellierung | N / A | +/-3° |
| Profile von der Wand | 1.44 Zoll | 3.2 Zoll (eingefahren) bis 15.4 Zoll (ausgefahren) |
| Material | Legierter Stahl | |
| Wandtypkompatibilität | 16-24 Zoll Holzständer, Beton, Ziegel | |
This image highlights the UL Listed certification for reliability and the maximum weight capacity of 132 lbs for the tilt mount, ensuring product safety and durability.
This image visually represents the wide compatibility of the TV mount, indicating it fits TVs from 37 to 75 inches and lists various supported VESA patterns, from 200x100mm up to 600x400mm.
Garantieinformationen
Pipishell products typically come with a manufacturer's warranty covering defects in materials and workmanship. For specific warranty terms and duration, please refer to the warranty card included with your product or visit the official Pipishell webBewahren Sie Ihren Kaufbeleg als Kaufnachweis für Garantieansprüche auf.
Kundenservice
If you encounter any issues during installation or operation, or if you have questions about your Pipishell TV Wall Mount, please contact our customer support team. You can usually find contact information (email, phone, or website) on the product packaging or the official Pipishell webWebsite.
Weitere Informationen und Unterstützung finden Sie unter Pipishell Store on Amazon.