ASUS ROG Loki SFX-L 1000W Platinum Netzteil – Benutzerhandbuch

1. Zu Endeview

Produktbeschreibung

The ASUS ROG Loki SFX-L 1000W Platinum is a fully modular power supply designed for small form factor gaming PCs. It is 80 Plus Platinum certified, ensuring high efficiency, and features a 120mm PWM ARGB fan for effective cooling. This power supply is ATX 3.0 compatible and PCIe 5.0 ready, providing robust power delivery for modern high-performance components.

Hauptmerkmale

• ROG-Kühlkörper: Cover critical components to maintain lower temperatures, contributing to a longer lifespan and reduced operational noise.
• Axial-Tech-Kühlung: Features a 120mm fan with PWM control, optimized for low noise levels while effectively managing thermals.
• ATX 3.0-kompatibel: Compliant with ATX 3.0 guidelines and includes a 16-pin PCIe cable capable of delivering up to 600W of power to PCIe Gen 5.0 graphics cards.
• 80 PLUS Platin-zertifiziert: Achieves up to 92% efficiency, resulting in lower heat generation, reduced noise, and enhanced reliability.
• Aura Sync-kompatibel: Allows synchronization of lighting effects with other compatible components in your gaming setup.

2. Einrichtungsanweisungen

Packungsinhalt

Überprüfen Sie, ob alle Komponenten im Paket vorhanden sind:

• ASUS ROG Loki SFX-L 1000W Platinum Netzteil
• Modular Cable Set (as detailed below)
• Netzkabel
• Befestigungsschrauben
• Benutzerhandbuch (dieses Dokument)

Installationsschritte

1. Bereiten Sie Ihr System vor: Ensure your computer is powered off and unplugged from the wall outlet. Open your computer case to access the power supply mounting area.
2. Netzteil montieren: Carefully place the ROG Loki SFX-L 1000W Platinum into the designated SFX-L power supply bay in your chassis. Secure it using the provided mounting screws.
3. Modulare Kabel anschließen: Identify the necessary cables for your components (motherboard, CPU, graphics card, storage drives, peripherals). Connect the appropriate modular cables to the power supply unit first. Refer to Figure 3 for the modular connector layout.
4. Komponenten verbinden: Route the connected cables through your chassis and connect them to their respective components. Ensure all connections are firm and properly seated. Pay special attention to the 16-pin PCIe Gen 5.0 cable for compatible graphics cards.
5. Wechselstrom anschließen: Once all internal connections are made, close your computer case. Connect the AC power cord to the power supply's AC inlet and then to a wall outlet.

3. Bedienung

Ein-/Ausschalten

After installation, ensure the power switch on the rear of the power supply is in the 'Off' (0) position before connecting to the wall outlet. Once connected, flip the switch to the 'On' (I) position. You can then power on your computer using its case power button.

Efficiency and Cooling

The 80 PLUS Platinum certification ensures that the power supply operates with high efficiency, converting more wall power into usable electricity for your components and generating less waste heat. The Axial-tech 120mm PWM fan is designed to provide optimal airflow while maintaining low noise levels. The 0dB technology allows the fan to stop completely under light loads, ensuring silent operation when your system demand is low.

Aura Sync RGB-Beleuchtung

The integrated ARGB lighting on the fan and chassis is compatible with ASUS Aura Sync. Connect the provided Addressable RGB cable to a compatible motherboard header to synchronize lighting effects across your entire system. This allows for personalized aesthetics and a unified lighting theme.

4. Wartung

Durch sachgemäße Wartung wird die Langlebigkeit und optimale Leistung Ihres Netzteils gewährleistet:

• Staubentfernung: Reinigen Sie Lüfter und Lüftungsschlitze des Netzteils regelmäßig mit Druckluft von Staub. Stellen Sie sicher, dass das System vor der Reinigung ausgeschaltet und vom Stromnetz getrennt ist.
• Luftstrom sicherstellen: Verify that the power supply's intake and exhaust vents are not obstructed by cables or other components within the PC case. Good airflow is crucial for efficient cooling.
• Kabelmanagement: Maintain tidy cable management to prevent interference with airflow and to ensure no cables are pinched or damaged.

5. Fehlerbehebung

Sollten Sie Probleme mit Ihrem Netzteil haben, beachten Sie bitte die folgenden Schritte zur Fehlerbehebung:

• Kein Strom:
  • Prüfen Sie, ob das Netzkabel fest mit dem Netzteil und der Steckdose verbunden ist.
  • Ensure the power switch on the rear of the PSU is in the 'On' (I) position.
  • Verify that the main motherboard power cable (24-pin) and CPU power cables (4/8-pin) are correctly seated.
  • Testen Sie die Wandsteckdose mit einem anderen Gerät, um sicherzustellen, dass sie Strom liefert.
• Systeminstabilität/Abstürze:
  • Ensure all power cables to components (especially graphics card) are securely connected.
  • Confirm that your system's power requirements do not exceed the 1000W capacity of the PSU.
  • Prüfen Sie, ob in Ihrem PC-Gehäuse ausreichend Belüftung vorhanden ist, um eine Überhitzung zu vermeiden.
• Ungewöhnliche Geräusche:
  • If the fan is making unusual noises, ensure it is free from obstructions.
  • If coil whine is present, it is often a characteristic of high-performance components and typically does not indicate a fault.

If issues persist after performing these steps, contact ASUS customer support for further assistance.

6. Technische Daten

7. Garantieinformationen

The ASUS ROG Loki SFX-L 1000W Platinum Power Supply comes with a 10 Jahr eingeschränkte GarantieDiese Garantie deckt Material- und Verarbeitungsfehler bei normalem Gebrauch ab. Die detaillierten Garantiebedingungen finden Sie auf der Ihrem Produkt beiliegenden Garantiekarte oder auf der offiziellen ASUS-Supportseite. webWebsite.

8. Unterstützung

For additional support, technical assistance, or to download the latest drivers and utilities, please visit the official ASUS support webWebsite:

www.asus.com/support/

Sie können den ASUS-Kundendienst auch direkt über deren Website kontaktieren. webWebsite für personalisierte Unterstützung.