Lexip PIXMINDS Steelplay Adventure Twinpads Benutzerhandbuch

Einführung

The Lexip PIXMINDS Steelplay Adventure Twinpads are designed to enhance your gaming experience on compatible systems. These controllers offer precise input and comfortable handling for extended play sessions. This manual provides essential information for setup, operation, maintenance, and troubleshooting.

Packungsinhalt

Prüfen Sie nach dem Öffnen der Verpackung, ob alle Komponenten vorhanden sind:

• Lexip PIXMINDS Steelplay Adventure Twinpads (Left and Right controllers)
• Benutzerhandbuch (dieses Dokument)
• Required Lithium Ion batteries (pre-installed or included)

Image: The retail packaging for the Lexip PIXMINDS Steelplay Adventure Twinpads, showing the controllers and compatibility information.

Aufstellen

The Twinpads are compatible with Nintendo Switch™ and Nintendo Switch™ OLED models. They connect wirelessly via Bluetooth.

1. Charging the Twinpads

The Twinpads come with Lithium Ion batteries. Before first use, ensure they are fully charged. The LED indicators on the controllers will show charging status.

2. Koppeln mit Ihrem Gerät

1. Stellen Sie sicher, dass Ihre Nintendo Switch-Konsole eingeschaltet und auf die neueste Systemsoftware aktualisiert ist.
2. Im HOME-Menü wählen Sie „Controller“ > „Griff/Reihenfolge ändern“.
3. On each Twinpad, press and hold the small pairing button located on the side or back until the player LEDs begin to flash.
4. Once the LEDs stop flashing and remain solid, the Twinpad is successfully paired.
5. Repeat for the other Twinpad.

Bild: Vorderseite view of the Lexip PIXMINDS Steelplay Adventure Twinpads, showing the joysticks, D-pad, and action buttons.

Abbildung: Seite view of the Lexip PIXMINDS Steelplay Adventure Twinpads, highlighting the rail for attachment and potential pairing button location.

Abbildung: Rückseite view of the Lexip PIXMINDS Steelplay Adventure Twinpads, showing the ergonomic design and additional buttons.

Bedienungsanleitung

Once paired, the Twinpads function as independent left and right controllers, similar to the original Joy-Con controllers. They can be used for various games that support detached controller play.

Tastenlayout und Funktionen

• Left Twinpad: Analog Stick, D-pad, Minus (-) Button, Screenshot Button, SL/SR Buttons (on side rail).
• Right Twinpad: Analog Stick, A/B/X/Y Buttons, Plus (+) Button, Home Button, SL/SR Buttons (on side rail).
• Hinweis: Die spezifischen Tastenfunktionen können je nach Spiel variieren.

Wiederverbindung

If the Twinpads disconnect or you wish to reconnect them after turning off the console, simply press any button on each Twinpad. They should automatically reconnect to the last paired console.

Wartung

Proper care will extend the lifespan of your Twinpads.

• Reinigung: Use a soft, dry cloth to wipe the surface of the controllers. For stubborn dirt, slightly dampBefeuchten Sie das Tuch mit Wasser. Vermeiden Sie die Verwendung von scharfen Chemikalien oder Scheuermitteln.
• Lagerung: Store the Twinpads in a cool, dry place away from direct sunlight and extreme temperatures.
• Batteriepflege: If storing for an extended period, ensure the batteries are partially charged (around 50%) to maintain battery health. Avoid fully discharging the batteries for long periods.

Fehlerbehebung

If you encounter issues with your Twinpads, try the following solutions:

• Controllers not pairing:
  • Ensure the Twinpads are charged.
  • Verify Bluetooth is enabled on your console.
  • Try re-pairing the controllers by following the "Pairing with Your Device" steps.
  • Move closer to the console to ensure a strong Bluetooth signal.
  • Starten Sie Ihre Nintendo Switch-Konsole neu.
• Eingabeverzögerung oder Verbindungsabbruch:
  • Ensure there are no obstructions between the controllers and the console.
  • Minimieren Sie Störungen durch andere drahtlose Geräte.
  • Überprüfen Sie den Batteriestand und laden Sie ihn bei Bedarf auf.
• Tasten reagieren nicht:
  • Reinigen Sie den Bereich um die Tasten, um sämtliche Rückstände zu entfernen.
  • Ensure the controllers are properly paired and connected.
  • Test the controllers in a different game or the console's controller test menu.

Technische Daten

Garantie und Support

The Lexip PIXMINDS Steelplay Adventure Twinpads come with a 5 Jahr Garantie, as indicated on the product packaging. To register your product and activate your warranty, please visit the official warranty registration page:

Register Your Product for Warranty

For technical support or further inquiries, please refer to the official Lexip support channels or contact your retailer.