Einführung
Thank you for choosing the Offacy Electric Gooseneck Kettle CEK-204. This kettle is designed to provide precise temperature control and an optimal pour-over flow rate, enhancing your coffee and tea brewing experience. Crafted from 100% food-grade 304 stainless steel, it ensures purity in every sip. Please read this manual thoroughly before use to ensure safe and efficient operation.
Wichtige Sicherheitsinformationen
- Lesen Sie vor der Verwendung des Geräts alle Anweisungen.
- Berühren Sie keine heißen Oberflächen. Benutzen Sie Griffe oder Knöpfe.
- Um Brände, Stromschläge und Verletzungen zu vermeiden, tauchen Sie das Kabel, den Stecker oder das Gerät nicht in Wasser oder andere Flüssigkeiten.
- Bei der Benutzung von Geräten durch oder in der Nähe von Kindern ist eine genaue Aufsicht erforderlich.
- Ziehen Sie den Stecker aus der Steckdose, wenn Sie das Gerät nicht verwenden und bevor Sie es reinigen. Lassen Sie das Gerät abkühlen, bevor Sie Teile anbringen oder abnehmen und bevor Sie es reinigen.
- Betreiben Sie kein Gerät mit beschädigtem Kabel oder Stecker oder wenn das Gerät Fehlfunktionen aufweist oder auf sonstige Weise beschädigt wurde. Bringen Sie das Gerät zur Überprüfung, Reparatur oder Einstellung zum nächstgelegenen autorisierten Servicezentrum.
- Die Verwendung von Zubehör, das vom Gerätehersteller nicht empfohlen wird, kann zu Bränden, Stromschlägen oder Verletzungen führen.
- Nicht im Freien verwenden.
- Lassen Sie das Kabel nicht über die Tisch- oder Thekenkante hängen oder heiße Oberflächen berühren.
- Nicht auf oder in die Nähe eines heißen Gas- oder Elektrobrenners oder in einen beheizten Ofen stellen.
- Stecken Sie immer zuerst den Stecker in das Gerät und stecken Sie dann das Kabel in die Steckdose. Um die Verbindung zu trennen, schalten Sie alle Regler auf „Aus“ und ziehen Sie dann den Stecker aus der Steckdose.
- Das Gerät darf nur für den vorgesehenen Zweck verwendet werden.
- Wenn während des Erhitzungsvorgangs der Deckel abgenommen wird, kann es zu Verbrühungen kommen.
- Dieses Gerät ist nur für den Hausgebrauch bestimmt.
Packungsinhalt
- Wasserkocher mit Schwanenhals
- Temperature Controlled Power Base
- Bedienungsanleitung
Aufstellen
1. Erstreinigung
Before first use, fill the kettle with water to the MAX line. Boil the water, then discard it. Repeat this process 2-3 times to remove any manufacturing residues. Hand wash only.
2. Placing the Kettle on the Base
Place the temperature-controlled power base on a stable, flat, and dry surface. Ensure the power cord is securely plugged into a 120V AC 60Hz outlet. Carefully place the kettle onto the power base, ensuring it is seated correctly.
3. Füllen mit Wasser
Remove the lid by pulling it upwards. Fill the kettle with fresh, cold water. Do not fill below the MIN line or above the MAX line indicated inside the kettle. Replace the lid securely.

Bedienungsanleitung
1. Einschalten
Short press the "START" button (the knob) for 1 second to power on the kettle. The display screen will fully illuminate to confirm normal operation. The kettle will enter "HOLD" mode by default.

2. Temperatureinstellung
Turn the knob to adjust the desired water temperature. The stylish HD LED screen will display the current and set temperatures. Press the knob to start boiling water. The heating icon will be displayed.

3. Umschalten der Temperatureinheiten (°F/°C)
Short press the "°F/°C" button to switch between Fahrenheit and Celsius temperature units.
4. Temperature Hold & Auto Shut-Off
The kettle features a temperature retention function. Once the water reaches the set temperature, the kettle will stop heating, and the heat preservation icon will start to flash. The kettle will enter "HOLD" mode for up to 60 minutes. After 60 minutes of unattended operation, the kettle will auto-shut off for safety and convenience.
5. Brew Timer
Short press the "TIMER" button. The timer will start counting after 3 seconds, allowing you to precisely time your brewing process.

6. Stummschaltung
Long press the "HOLD" button for 3 seconds to turn on the "Mute" mode. A mute icon will appear on the screen. Long press "HOLD" for 3 seconds again to turn off the "Mute" mode. The mute icon will disappear, and there will be a beep sound.
7. Pour-Over Control
The finely crafted 6.8mm gooseneck spout design ensures an optimal water flow, making pour-over brewing easy and precise, even for beginners.

8. Quick Start Guide Video
9. Temperature Adjustment Demonstration Video
Wartung
1. Reinigung
Always unplug the kettle from the power outlet and allow it to cool completely before cleaning. The kettle body and lid should be hand washed only. Do not immerse the power base in water or any other liquid.
2. Descaling (Removing Limescale)
Limescale may form on the bottom of the kettle during the boiling process, especially if the water is not completely filtered of calcium and magnesium metal ions. Limescale will not form if only pure or distilled water is heated. Water quality varies by geography, as does hardness and scale generation.
- Add a certain amount of white vinegar or citric acid to the kettle.
- Boil the solution and let it soak for 30 minutes.
- Clean the kettle thoroughly and wipe it with a soft rag.
The frequency of descaling is determined by usage and water hardness.

Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Wasserkocher lässt sich nicht einschalten. | No power supply. Kettle not properly seated on base. | Ensure power cord is plugged in. Place kettle firmly on the power base. |
| Water not heating to set temperature. | Incorrect temperature setting. Kettle removed from base prematurely. | Verify desired temperature is set. Ensure kettle remains on base until heating is complete. |
| Display screen is blank or flickering. | Power interruption. Loose connection. | Unplug and re-plug the power cord. Ensure stable power supply. |
| Kettle beeps continuously. | Water has reached set temperature. | This is normal operation. The kettle is signaling that the target temperature has been reached. |
Technische Daten
| Besonderheit | Detail |
|---|---|
| Marke | Amt |
| Modellname | CEK-204 |
| Kapazität | 0.9 Liter |
| Material | 304 Stainless steel kettle body and lid, Plastic base |
| Farbe | Schwarz |
| Bandtage | 120 Volt |
| Wastage | 1200 Watt |
| Besondere Merkmale | 6.8mm Precise gooseneck spout, 60-minute hold mode, Brew stopwatch, Digital Control, Temperature Control |
| Artikelabmessungen L x B x H | 7.4 Zoll L x 10.8 Zoll B x 8.1 Zoll H |
| Artikelgewicht | 2.6 Pfund |
| Hinweise zur Produktpflege | Handwäsche nur |
Garantie und Support
The Offacy Electric Gooseneck Kettle CEK-204 comes with a standard manufacturer's warranty. For detailed warranty information, product support, or to inquire about replacement parts, please contact Offacy customer service through their official webBitte wenden Sie sich an die Website oder den Händler, bei dem Sie das Produkt gekauft haben. Bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.