1. Einleitung
Thank you for choosing the Lixada Cordless Robotic Pool Cleaner. This automatic pool cleaner is designed to provide efficient and hassle-free cleaning for various flat-bottom pool types. Please read this manual thoroughly before operating the device to ensure proper use, maintenance, and optimal performance.
2. Produktmerkmale
- Schnurloses Design: Eliminates tangled cables, offering freedom of movement and ease of use.
- Starke Saugkraft: Equipped with two powerful motors and an oversized intake area to effectively collect debris such as leaves, sand, and gravel.
- Surface Control System: Adapts to the pool surface type, enabling a maximum climbing capacity of 18° for thorough cleaning.
- Independent Scrapers: Two independent scrapers assist in scrubbing the pool floor for enhanced cleaning.
- Lange Betriebszeit: Features a built-in 5200 mAh battery, providing up to 120 minutes of cleaning after a 3-4 hour charge.
- Automatischer Abruf: Automatically stops near the pool wall when the battery is low, allowing for easy retrieval with the included hook.
- Vielseitige Kompatibilität: Suitable for flat-bottom pools, including indoor rectangular pools and outdoor rectangular, elliptical, or circular pools.
Image: The Lixada Cordless Robotic Pool Cleaner offers a hassle-free experience compared to traditional wired pool cleaners with messy hoses.
Image: The cleaner is equipped with powerful dual-motors that propel the device and filter pool water.
Image: Illustrates the cyclonic vacuum technology for powerful debris capture and the surface control system for maximum wall climbing performance.
3. Packungsinhalt
Bitte überprüfen Sie das Paket sorgfältig, um sicherzustellen, dass alle Artikel vorhanden und unbeschädigt sind:
- 1 x Lixada Robotic Pool Cleaner
- 1 x Netzteil (110-220 V)
- 2 x Floor Scrapers
- 2 x Schrauben
- 1 x Griff
- 1 x Haken
- 1 x Benutzerhandbuch
4. Einrichtungsanweisungen
4.1 Aufladen des Geräts
- Ensure the pool cleaner is dry before charging.
- Schließen Sie den Netzadapter an den Ladeanschluss des Reinigungsgeräts an.
- Stecken Sie den Netzadapter in eine normale Steckdose (110-220 V).
- Die Ladeanzeige leuchtet auf. Eine vollständige Ladung dauert in der Regel 3–4 Stunden.
- Sobald der Akku vollständig geladen ist, trennen Sie den Adapter.
Image: The pool cleaner being charged using the provided power adapter. Ensure the device is dry before charging.
4.2 Attaching the Handle and Scrapers
- Align the handle with the designated slots on the top of the cleaner.
- Befestigen Sie den Griff mit den mitgelieferten Schrauben.
- Attach the two floor scrapers to the underside of the cleaner as indicated in the diagram (refer to the physical manual for detailed diagrams if available).
5. Bedienungsanleitung
5.1 Starten des Reinigungszyklus
- Stellen Sie sicher, dass das Reinigungsgerät vollständig aufgeladen ist.
- Senken Sie den Reiniger vorsichtig in den Pool ab. Er wird auf den Grund sinken.
- Press the power button to start the cleaning cycle. The cleaner will begin moving and filtering water.
- The cleaner will operate for up to 120 minutes on a full charge.
Image: Gently lower the cleaner into the pool using the handle.
Image: The cleaner operating on the pool floor, collecting debris.
5.2 Setting Cleaning Patterns
The cleaner offers different cleaning patterns suitable for various pool shapes. Adjust the front and rear dials on the device to select the desired pattern:
- Mode 1: A-B - Recommended for oval pools.
- Mode 2: A-C - Recommended for free-formed pools.
- Mode 3: B-C - Default setting, suitable for most pools.
Image: Instructions for adjusting front and rear dials to set the desired cleaning pattern based on pool shape.
5.3 Das Reinigungsgerät bergen
When the battery is low, the cleaner will automatically move to the nearest pool wall. Use the provided hook to carefully lift the cleaner out of the water. Ensure to turn off the device before charging or cleaning.
6. Wartung
6.1 Reinigen des Filters
- Nach jedem Reinigungszyklus muss der Reiniger aus dem Pool entfernt werden.
- Open the filter compartment (refer to the physical manual for location).
- Nehmen Sie den Filterkorb heraus und leeren Sie ihn von den angesammelten Ablagerungen.
- Rinse the filter basket thoroughly with clean water.
- Setzen Sie den sauberen Filterkorb wieder ein und verschließen Sie das Fach fest.
Image: The cleaner features an oversized intake area for collecting larger debris, reducing the frequency of filter emptying.
6.2 Allgemeine Reinigung und Lagerung
- Wischen Sie die Außenseite des Reinigers mit einem weichen, fusselfreien Tuch ab.amp Tuch. Verwenden Sie keine aggressiven Chemikalien.
- Bewahren Sie den Reiniger an einem kühlen, trockenen Ort fern von direkter Sonneneinstrahlung und extremen Temperaturen auf.
- Um die Batterieleistung zu erhalten, sollte diese während längerer Lagerzeiten regelmäßig aufgeladen werden.
7. Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Der Reiniger lässt sich nicht einschalten. | Schwache Batterie; Einschalttaste nicht richtig gedrückt. | Charge the cleaner fully. Press the power button firmly. |
| Der Reiniger bewegt sich langsam oder bleibt stehen. | Low battery; Filter basket is full; Obstruction in motors/wheels. | Recharge the battery. Clean the filter basket. Check for and remove any obstructions. |
| Mangelhafte Reinigungsleistung. | Filter basket is full; Incorrect cleaning pattern selected; Scrapers are worn. | Clean the filter basket. Adjust the cleaning pattern according to your pool shape. Inspect and replace scrapers if necessary. |
| Cleaner stirs up debris instead of collecting it. | Cleaner moving too fast for fine debris. | Ensure the filter is clean. For very fine debris, a slower pass or multiple cycles might be needed. |
8. Spezifikationen
| Besonderheit | Detail |
|---|---|
| Modellnummer | KFN5103152288932EF |
| Material | ABS (Acrylnitril-Butadien-Styrol) |
| Batteriekapazität | 5200 mAh |
| Ladezeit | 3-4 Stunden |
| Betriebsdauer | Bis zu 120 Minuten |
| Wasserdichtigkeit | IPX8 |
| Filterfeinheit | 180um |
| Nennbetriebsvoltage | 11.5 V |
| Adapter Input Frequency | 50/60 Hz |
| Adapter-Ausgangsvoltage | 12.6 V |
| Abmessungen (L x B x H) | 33 x 33 x 15 cm (13 x 13 x 5.9 Zoll) |
| Nettogewicht | 3.5 kg |
9. Garantie und Support
Information regarding specific warranty terms and availability of spare parts is not provided in the product data. For warranty claims, technical support, or inquiries about spare parts, please contact your original retailer or the Lixada customer service directly. Keep your purchase receipt as proof of purchase.
Note: Some marketplace purchases may have different warranty conditions. Please verify with your seller.