1. Einführung und Endeview
The JESSINIE HLK-LD2410 is a 24GHz human presence sensor radar module designed for accurate detection of human presence, including static, micro-motion, sitting, and lying states. This module offers a wide detection angle and configurable sensing distances, making it suitable for various applications requiring precise human presence detection.
This manual provides essential information for the proper setup, operation, and maintenance of your HLK-LD2410 module. Please read it thoroughly before use.
2. Produktmerkmale
- Hohe Empfindlichkeit: Capable of detecting static, micro-motion, sitting, and lying human bodies, which traditional sensors may miss.
- Großer Erfassungsbereich: Farthest sensing distance up to 5 meters with a detection angle of up to ±60 degrees.
- Anpassungsfähigkeit an die Umwelt: Performance is not affected by environmental factors such as temperature, brightness, humidity, or light fluctuations.
- Concealed Operation: Can be hidden within product enclosures, eliminating the need for surface openings and improving product aesthetics.
- Konfigurierbare Parameter: Flexible configuration of sensing distance and sensitivity for different zones.
- Einfache Integration: Designed for plug-and-play assembly with a compact form factor.
3. Produktkomponenten und Abmessungen
The HLK-LD2410 module is a compact circuit board with integrated radar components and a pin header for connectivity.
Abbildung 3.1: Oben view of the HLK-LD2410 radar module, showing the main components and pin header.
Abbildung 3.2: Unten view of the HLK-LD2410 radar module, highlighting the WiGig antenna design.
Figure 3.3: Dimensions of the HLK-LD2410 module, measuring approximately 35mm in length and 7mm in width.
The module typically comes with a Dupont cable for easy connection to development boards or other systems.
4. Einrichtungsanweisungen
- Stromversorgung: Connect the module to a stable DC 5V power supply. Refer to the pinout diagram for correct voltage- und Erdungsanschlüsse.
- Datenverbindung: Use the provided Dupont cable to connect the module's data pins (e.g., UART TX/RX) to your microcontroller or development board.
- Montage: Position the module in the desired detection area. Ensure there are no metallic obstructions directly in front of the radar antenna that could interfere with signal transmission. The module can be concealed behind non-metallic materials.
- Softwarekonfiguration: Depending on your application, you may need to configure the module's parameters (e.g., detection distance, sensitivity) via a serial interface or dedicated software. Consult the HLK-LD2410 datasheet for detailed communication protocols and commands.
Video 4.1: Ein überview of the HLK-LD2410B-P Human Presence Radar Module Sensor Board, demonstrating its physical characteristics and potential for integration. This video is provided by Jessinie, the brand seller.
5. Bedienungsanleitung
Once powered and configured, the HLK-LD2410 module continuously emits 24GHz millimeter waves to detect human presence. The module outputs data indicating presence, motion, and distance information through its serial interface.
- Anwesenheitserkennung: The module can distinguish between a person being present (static or micro-motion) and no presence.
- Bewegungserkennung: It can detect gross motion within its field of view.
- Distance Information: The module provides approximate distance to the detected object, which can be used for zone-based detection.
- Anpassung: Utilize the module's configuration options to fine-tune sensitivity and detection zones to match specific application requirements. For example, you can set different sensitivity levels for various distances to avoid false triggers.
6. Wartung
The HLK-LD2410 module is designed for low maintenance. Follow these guidelines to ensure optimal performance:
- Sauber halten: Ensure the module and its immediate surroundings are free from dust and debris.
- Vermeiden Sie physischen Schaden: Handle the module with care to prevent damage to the circuit board or antenna.
- Umgebungsbedingungen: Operate the module within its specified temperature range of -40°C to +85°C. Avoid exposure to extreme moisture or corrosive environments.
- Firmware-Updates: Überprüfen Sie regelmäßig die Herstellerangaben. webWebsite für alle verfügbaren Firmware-Updates, die die Leistung verbessern oder neue Funktionen hinzufügen können.
7. Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| No detection or inconsistent detection | Incorrect power supply; Obstruction in detection path; Incorrect sensitivity settings; Outdated firmware. | Verify 5V DC power supply; Ensure clear line of sight for radar or use appropriate non-metallic enclosure; Adjust sensitivity and distance parameters; Check for and apply firmware updates. |
| Module not responding via serial interface | Incorrect wiring; Incorrect serial port settings (baud rate, etc.); Module damage. | Check pin connections (TX/RX, GND, VCC); Confirm serial port settings match module specifications; Test with a known working module if possible. |
| Falsche Erkennungen | High sensitivity; Environmental interference (e.g., strong vibrations, large moving objects outside intended zone). | Reduce sensitivity; Refine detection zones; Ensure proper mounting to minimize vibrations. |
8. Spezifikationen
- Modell: HLK-LD2410
- Betriebsfrequenzband: 24 GHz – 24.25 GHz
- Erfassungswinkel: ±60 Grad
- Farthest Sensing Distance: Bis zu 5 Meter
- Energiequelle: Gleichstromversorgung
- Bandtage: 5 Volt
- Betriebstemperaturbereich: -40°C bis +85°C
- Abmessungen: Approximately 35mm x 7mm (Length x Width)
- Artikelgewicht: Ungefähr 0.317 Unzen
9. Garantie und Support
JESSINIE products are manufactured to high-quality standards. For warranty information, technical support, or further assistance, please refer to the official JESSINIE webWebsite oder wenden Sie sich an Ihren Händler.
Bitte bewahren Sie Ihren Kaufbeleg für eventuelle Garantieansprüche auf.