FLIPSKY 75200 Pro 84V High Current ESC Instruction Manual

1. Einleitung

This manual provides essential information for the safe and effective use of the FLIPSKY 75200 Pro 84V High Current Electronic Speed Controller (ESC). This VESC-based controller is designed for high-power applications such as fighting robots, electric surfboards, and AGV robots, offering robust performance and advanced control capabilities. Please read this manual thoroughly before installation and operation.

Abbildung 1: Vorderseite view of the FLIPSKY 75200 Pro 84V High Current ESC, showing the main body and capacitor bank.

2. Spezifikationen

Figure 2: Dimensions of the FLIPSKY 75200 Pro ESC, indicating length, width, and height.

3. Funktionen

• Adjustable Protection Functions: Beinhaltet niedrige Lautstärketage, hohe Lautstärketage, over current, abnormal temperature, and MOSFET/motor over-temperature protection for enhanced safety and longevity.
• Mehrere Steuerungsmodi: Supports Current, Duty Cycle, Speed, and PID control modes, providing versatility for various applications.
• IMU Module Support: Capable of connecting to IMU modules (e.g., MPU9250, MPU9150, MPU6050, LSM6DS3, BMI160) via the IIC interface for balancing car functionality.
• Hochleistungs-CPU: Equipped with a 32F405 CPU operating at 168MHz for efficient processing.
• Aluminum PCB: Features an aluminum PCB design for superior heat dissipation, contributing to an extended product lifespan.
• Zwei Kommunikationsanschlüsse: Two COMM ports support UART Bluetooth modules, screen displays, or remote controllers for flexible connectivity.

Abbildung 3: Rückseite view of the FLIPSKY 75200 Pro ESC, highlighting the aluminum heat sink for efficient thermal management.

Abbildung 4: Intern view of the FLIPSKY 75200 Pro ESC's PCB, showing the components and aluminum board for heat dissipation.

4. Einrichtung und Anschlüsse

Proper connection of the ESC to your system components is crucial for safe and reliable operation. Refer to the connection diagram below for guidance.

1. Batterieanschluss: Connect your battery pack (4-20S LiPo, 14-84V) to the main power input terminals (red for positive, black for negative). Ensure correct polarity.
2. Motoranschluss: Connect the three phase wires from your motor to the corresponding outputs on the ESC. The 8 AWG wires are suitable for high current applications.
3. Kommunikationsanschlüsse:
   • CAN Port: For connecting multiple VESC-based controllers or other CAN-enabled devices.
   • HALL Sensor Port: Connect your motor's Hall sensors for sensored operation.
   • PPM Port: For connecting standard RC receivers or PWM signals.
   • USB-Anschluss: Connect to a computer for configuration and firmware updates using the VESC_TOOL software.
   • COMM Ports (UART/IIC): For connecting Bluetooth modules, display screens, IMU modules, or other UART/IIC compatible peripherals.
4. Sensoranschlüsse: If using ABI, HALL, AS5047, or AS5048A sensors, connect them to the designated sensor ports.

Wichtig: Always ensure all connections are secure before applying power. Incorrect wiring can damage the ESC or other components.

Figure 5: Detailed connection diagram for the FLIPSKY 75200 Pro ESC, illustrating battery, motor, and various communication/sensor ports.

Figure 6: The FLIPSKY 75200 Pro ESC with various wires connected, including power, motor, and USB for setup.

5. Bedienungsanleitung

The FLIPSKY 75200 Pro ESC is programmable via the VESC_TOOL software. This tool allows for comprehensive configuration of motor parameters, control modes, and protection settings.

5.1. Initial Configuration with VESC_TOOL

1. Laden Sie die neueste VESC_TOOL-Software vom offiziellen VESC-Projekt herunter und installieren Sie sie. webWebsite oder FLIPSKY-Supportseite.
2. Verbinden Sie den ESC über den USB-Anschluss mit Ihrem Computer.
3. Launch VESC_TOOL and establish a connection to the ESC.
4. Follow the motor setup wizard within VESC_TOOL to detect and configure your motor. This process will calibrate motor parameters and set up basic control.
5. Configure desired control modes (Current, Duty Cycle, Speed, PID) and adjust parameters according to your application's requirements.
6. Set appropriate protection thresholds for voltage (low/high), current, and temperature to prevent damage.
7. Speichern Sie Ihre Konfiguration auf dem ESC.

5.2. Betriebsarten

The ESC supports various input sources (PPM, ADC, NRF, UART) for controlling motor speed and direction. Ensure your chosen input device is correctly configured in VESC_TOOL.

• Stromsteuerung: Directly controls the motor current, providing consistent torque.
• Tastverhältnissteuerung: Steuert den Prozentsatztage of time the motor receives full voltage, suitable for basic speed control.
• Speed Control (RPM): Maintains a target motor RPM, useful for applications requiring precise speed regulation.
• PID-Regelung: Advanced control loop for precise regulation of various parameters, often used with IMU for balancing applications.

6. Wartung

Regular maintenance helps ensure the longevity and optimal performance of your FLIPSKY 75200 Pro ESC.

• Sauber halten: Periodically clean the ESC, especially the heat sink fins, to ensure proper airflow and heat dissipation. Use a soft brush or compressed air to remove dust and debris.
• Verbindungen prüfen: Regularly check all wire connections (power, motor, communication) for looseness, corrosion, or damage. Secure any loose connections.
• Umweltschutz: While the aluminum case provides some protection, avoid exposing the ESC to excessive moisture, dust, or extreme temperatures beyond its operating range.
• Firmware-Updates: Check for official firmware updates via VESC_TOOL periodically. Updates can provide performance improvements, new features, or bug fixes.

7. Fehlerbehebung

This section addresses common issues you might encounter with your FLIPSKY 75200 Pro ESC.

For further assistance, refer to the VESC_TOOL documentation or contact FLIPSKY support.

8. Garantieinformationen

The FLIPSKY 75200 Pro 84V High Current ESC comes with a 6 Monate Garantie Diese Garantie gilt ab Kaufdatum und deckt Herstellungsfehler und Materialmängel bei normalem Gebrauch ab.

Von der Garantie ausgeschlossen sind Schäden, die verursacht werden durch:

• Unsachgemäße Installation oder Verkabelung.
• Exceeding specified voltage oder aktuelle Grenzwerte.
• Physical damage, impact, or water exposure.
• Nicht autorisierte Änderungen oder Reparaturen.
• Normale Abnutzung.

Please retain your proof of purchase for warranty claims. For warranty service, contact your retailer or FLIPSKY customer support.

9. Unterstützung

For technical support, product inquiries, or assistance with troubleshooting, please visit the official FLIPSKY website or contact their customer service department. Online resources, including FAQs and community forums, may also be available for common questions and advanced topics related to VESC-based controllers.

Hersteller: Flipsky