RUILON Welock PCB01 Electronic Door Lock User Manual

1. Einleitung

This manual provides detailed instructions for the installation, setup, operation, and maintenance of your RUILON Welock PCB01 Electronic Door Lock. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Image 1.1: The Welock PCB01 Electronic Door Lock, showing the cylinder, keypad, and RFID cards, alongside a smartphone displaying the control app.

2. Sicherheitshinweise

• Das Schloss darf keinen extremen Temperaturen oder direktem Wasserstrahl ausgesetzt werden.
• Use only specified AAA batteries. Do not mix old and new batteries.
• Keep RFID cards and access codes secure.
• Sorgen Sie für eine ordnungsgemäße Installation, um Schäden oder Funktionsstörungen zu vermeiden.
• Do not attempt to disassemble or repair the lock yourself. Contact support if issues arise.

3. Packungsinhalt

Überprüfen Sie, ob alle Artikel im Paket vorhanden sind:

• 1 x Welock Electronic Door Lock Cylinder
• 1 x Zubehörbox
• 3 x RFID-Karten
• 1 x Waterproof Silicone Case
• 2 x Hexagonal Screwdrivers
• 1 x Bedienungsanleitung (dieses Dokument)
• 1 x Replacement Screw Pack

4. Spezifikationen

5. Installation

The Welock PCB01 is designed for easy installation, replacing your existing mechanical cylinder without drilling or complex wiring. Ensure your door meets the compatibility requirements before proceeding.

5.1 Kompatibilitätsprüfung

Before installation, confirm your door's specifications:

• Türstärke: Compatible with doors from 50 mm to 100 mm.
• Zylindertyp: Must be a European standard cylinder. Not compatible with Swiss round cylinders or vintage door locks.
• Keyhole Position: The center of the keyhole must be at least 40 mm from the door frame.
• The keyhole of the outdoor side should only be installed from the outside.

Image 5.1: Visual guide for door compatibility, illustrating required door thickness and cylinder type.

5.2 Installationsschritte

1. Vorhandenen Zylinder entfernen: Unscrew the retaining screw on the side of your door that holds the current cylinder in place. Insert your key and turn it slightly (about 15-20 degrees) while pulling the cylinder out.
2. Adjust Welock Cylinder Length: The Welock cylinder is adjustable. Refer to the included accessory box for instructions on how to adjust the inner and outer lengths to match your door's thickness.
3. Insert Welock Cylinder: Insert the Welock electronic door lock into the cylinder hole. Ensure the outdoor keypad side is facing outwards.
4. Sichern Sie den Zylinder: Re-insert and tighten the retaining screw on the side of the door to secure the Welock cylinder.
5. Batterien installieren: Open the battery compartment on the inner knob and insert 3 AAA batteries (not included), ensuring correct polarity. Close the compartment.
6. Testfunktionalität: After installation, manually test the lock by turning the inner knob. Then, proceed to initial setup.

Image 5.2: Illustration of replacing a standard door cylinder with the Welock PCB01 smart lock.

6. Initial Setup and App Configuration

6.1 Download the WeLock App

The WeLock app is essential for managing your smart lock. Download it from your smartphone's app store (iOS and Android compatible) or scan the QR code below:

Download WeLock App (iOS/Android)

Image 6.1: QR code for direct download of the WeLock mobile application.

6.2 Pairing the Lock with the App

1. Aktivieren Sie Bluetooth auf Ihrem Smartphone.
2. Open the WeLock app and create an account or log in.
3. Follow the in-app instructions to add a new device. The app will search for nearby Welock devices.
4. Select your lock from the list and complete the pairing process.
5. You will be prompted to set an administrator password for the lock.

Image 6.2: The WeLock application interface, demonstrating features such as keyless entry, code creation, and unlock history.

6.3 Wi-Fi Connectivity (Gateway Required)

For remote control and Wi-Fi features, a separate Wi-Fi gateway is required (sold separately). Follow the gateway's instructions to connect it to your home network and link it with your Welock PCB01 via the WeLock app.

7. Bedienung des Schlosses

The Welock PCB01 offers multiple ways to unlock your door:

Bild 7.1: Überview of the multiple keyless unlocking methods available for the Welock PCB01.

7.1 Unlocking with Keypad (Code)

1. Durch Berühren wird das Tastenfeld aktiviert.
2. Enter your 6-8 digit access code.
3. Drücken Sie die Taste '#', um zu bestätigen.
4. The lock will unlock, allowing you to turn the outer knob to open the door.

Anti-Piep-Funktion: You can enter random digits before or after your actual code (up to 30 digits total) to prevent others from guessing your code. As long as the correct code sequence is embedded within the longer string, the lock will open.

7.2 Unlocking with RFID Card

1. Hold a registered RFID card near the RFID reader area on the outer knob.
2. The lock will beep and unlock.
3. Turn the outer knob to open the door.

Hinzufügen von RFID-Karten: Up to 20 RFID cards can be paired via the WeLock app.

7.3 Unlocking with Smartphone App (Bluetooth/Wi-Fi)

1. Open the WeLock app on your smartphone.
2. Ensure Bluetooth is enabled (for close-range unlock) or Wi-Fi gateway is connected (for remote unlock).
3. Tap the unlock icon within the app.
4. The lock will unlock, allowing you to turn the outer knob to open the door.

Temporäre Passwörter: The app allows you to generate temporary passwords for visitors, which can be time-limited or single-use. These can be shared remotely if a Wi-Fi gateway is connected.

Abbildung 7.2: Beispielample of sharing temporary access passwords with visitors via smartphone.

7.4 Notstromversorgung über USB

If the batteries are completely depleted, you can temporarily power the lock using a standard USB power bank connected to the micro-USB port on the outer knob. This will allow you to unlock the door using a registered code or RFID card.

8. Wartung

8.1 Batteriewechsel

The lock will issue an alarm when the battery level drops below 20%. You can also check the battery status in the WeLock app.

1. Open the battery compartment on the inner knob.
2. Entfernen Sie die alten AAA-Batterien.
3. Insert 3 new AAA 1.5V batteries, ensuring correct polarity.
4. Verschließen Sie das Batteriefach fest.

8.2 Reinigung

Wipe the lock's surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or electronic components.

9. Fehlerbehebung

10. Garantie und Support

For warranty information, technical support, or service inquiries, please contact RUILON customer support through your purchase platform or refer to the contact details provided with your product packaging.

Hersteller: WELOCK

Marke: RUILON