Einführung
Thank you for choosing the KEPLUG 8.7-inch Wired Motion Sensor LED Ceiling Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting fixture. This product features a built-in motion and light sensor, adjustable color temperature, and multiple operating modes, designed for various indoor applications.
Image: Two KEPLUG 8.7-inch wired motion sensor LED ceiling lights, showcasing their round, flush-mount design and integrated sensor modules.
Setup und Installation
This KEPLUG LED ceiling light is designed for hardwired installation on either ceilings or walls. Please ensure the power supply is turned off at the circuit breaker before beginning installation. It is recommended that installation be performed by a qualified electrician.
Schritte vor der Installation:
- Farbtemperatur auswählen: Before mounting, locate the color temperature switch on the back of the light fixture. Slide the switch to select your desired color temperature: 3000K (Warm White), 4000K (Natural White), or 6000K (Cool White). This setting cannot be changed after installation without removing the fixture.
- Sammeln Sie Werkzeuge: Ensure you have the necessary tools, including a screwdriver, wire strippers, and electrical tape.
Installationsschritte:
- Montagehalterung installieren: Secure the provided mounting bracket to the ceiling or wall junction box using the screws and anchors. Ensure the bracket is firmly attached and level.
- Verkabelung anschließen: Connect the household electrical wires to the corresponding wires on the light fixture using the provided wire nuts. Typically, black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground). Ensure all connections are secure.
- Leuchte anbringen: Align the light fixture with the installed mounting bracket. Push the fixture upwards and twist clockwise until it locks securely into place. Ensure the fixture is flush against the mounting surface.
- Strom wiederherstellen: Sobald die Leuchte sicher installiert ist, schalten Sie die Stromversorgung am Sicherungsautomaten wieder ein.
Image: Illustration showing the mounting bracket being secured to the ceiling with screws and anchors.
Image: Hands demonstrating the easy lock installation method, showing the light fixture being twisted onto the mounting bracket.
Bedienungsanleitung
Your KEPLUG motion sensor LED ceiling light offers adjustable settings for optimal performance.
Betriebsarten:
The light fixture features a slide switch on the side to select between three operating modes:
- EIN-Modus: The light functions as a standard ceiling lamp, remaining continuously on. It can be controlled via your wall switch. Motion sensing is disabled in this mode.
- Aus-Modus: Das Licht ist ausgeschaltet.
- Automatikmodus: This mode activates the motion and light sensors. The light will turn on automatically when motion is detected in low ambient light conditions.
Image: Visual representation of the three operating modes (ON, OFF, AUTO) and how they affect the light's behavior based on ambient light and motion.
Motion Sensor Functionality (AUTO Mode):
In AUTO mode, the built-in microwave motion sensor detects movement within a 120-degree angle and a range of 9-18 feet. The light will activate when motion is detected and the ambient light is low. After motion ceases, the light will remain on for a set duration before automatically turning off.
Einstellbare Timereinstellungen:
The light offers three adjustable timer settings for how long it remains on after motion is no longer detected:
- 30 Sekunden
- 120 Sekunden
- 180 Sekunden
To adjust the timer, locate the small slide switch next to the motion sensor on the light fixture and select your preferred duration.
Image: Illustration detailing the motion sensor's detection angle and range, along with the switch for selecting the 30s, 120s, or 180s auto-off timer.
Auswahl der Farbtemperatur:
As mentioned in the setup, the color temperature (3000K Warm White, 4000K Natural White, 6000K Cool White) is selected via a switch on the back of the fixture prior to installation.
Image: A visual comparison of the three selectable color temperatures: 3000K Warm White, 4000K Natural White, and 6000K Cool White, as emitted by the light fixture.
Wartung
To ensure the longevity and optimal performance of your KEPLUG LED ceiling light, follow these simple maintenance guidelines:
- Reinigung: Disconnect power to the fixture before cleaning. Use a soft, dry, or slightly damp cloth to wipe the surface of the light. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electronic components.
- Inspektion: Überprüfen Sie die Leuchte regelmäßig auf Beschädigungen oder lose Verbindungen. Sollten Sie Mängel feststellen, wenden Sie sich an einen qualifizierten Elektriker.
- Lampenwechsel: This fixture uses integrated LED technology, meaning the LED bulbs are not user-replaceable. The LEDs are designed for a long lifespan (over 30,000 hours).
Fehlerbehebung
If you encounter issues with your KEPLUG motion sensor LED ceiling light, refer to the following common problems and solutions:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Licht geht nicht an. | Keine Stromversorgung. Falscher Modus ausgewählt. Sufficient ambient light (in AUTO mode). | Prüfen Sie den Sicherungsautomaten und den Wandschalter. Stellen Sie sicher, dass der Modusschalter auf „EIN“ oder „AUTO“ eingestellt ist. In 'AUTO' mode, the light will only activate in low light conditions. Test in a darker environment. |
| Bewegungssensor erkennt keine Bewegung. | Light is not in 'AUTO' mode. Hindernis im Erfassungsbereich. Das Umgebungslicht ist zu hoch. Die Bewegung befindet sich außerhalb des Erfassungsbereichs/-winkels. | Ensure the mode switch is set to 'AUTO'. Entfernen Sie alle Objekte, die den Sensor blockieren. view. The sensor is designed to activate in low light. If the area is bright, it will not turn on. Ensure motion occurs within the 9-18 feet range and 120-degree angle. |
| Das Licht schaltet sich zu schnell aus oder bleibt zu lange an. | Falsche Timereinstellung. | Adjust the timer switch on the fixture to 30s, 120s, or 180s as desired. |
| Difficulty with mounting. | Mounting surface is not flat. | Ensure the ceiling or wall surface is perfectly flat for proper alignment and secure attachment of the fixture. |
Produktspezifikationen
| Besonderheit | Detail |
|---|---|
| Marke | KEPLUG |
| Modellname | motion sensor ceiling light |
| Technische Daten | 8.66"L x 8.66"W x 1.11"H (22cm diameter, 2.5cm thickness) |
| Artikelgewicht | 2.01 Pfund (0.91 Kilogramm) |
| Wastage | 18 Watt |
| Helligkeit | 1600 Lumen |
| Farbtemperatur | 3000K (Warm White), 4000K (Natural White), 6000K (Cool White) - Adjustable |
| Stromquelle | Wechselstrom (festverdrahtet) |
| Bandtage | 110 Volt |
| Besondere Merkmale | Adjustable Color Temperature, Energy Efficient, Motion Sensor, Timer, Water Resistant |
| Erfassungswinkel des Bewegungssensors | 120 Grad |
| Erfassungsbereich des Bewegungssensors | 9-18 Fuß (ca. 3-5 Meter) |
| Installationstyp | Unterputz |
| Material | ABS-Kunststoff |
| Verwendung im Innen- und Außenbereich | Innenbereich |
| Lebensdauer | Über 30,000 Stunden |
| Im Lieferumfang enthaltene Komponenten | Montagezubehör |
Image: Technical drawing illustrating the dimensions of the KEPLUG ceiling light, showing a diameter of 22cm and a thickness of 2.5cm.
Garantieinformationen
For detailed warranty information regarding your KEPLUG Motion Sensor LED Ceiling Light, please refer to the product packaging or contact KEPLUG customer support directly. Warranty terms and conditions may vary.
Kundenservice
If you have any questions, require technical assistance, or need further support with your KEPLUG product, please contact KEPLUG customer service through the retailer's platform or the official KEPLUG webBitte halten Sie bei Kontaktaufnahme mit dem Support Ihre Produktmodellnummer und das Kaufdatum bereit.