JIVOIT Queen Upholstered LED Bed Frame Instruction Manual

Wichtige Sicherheitsinformationen

Bitte lesen Sie vor der Montage und Inbetriebnahme alle Anweisungen sorgfältig durch. Bewahren Sie diese Anleitung zum späteren Nachschlagen auf.

• Vergewissern Sie sich vor Beginn der Montage, dass alle Teile vorhanden und unbeschädigt sind. Kontaktieren Sie umgehend den Kundendienst, falls Teile fehlen oder beschädigt sind.
• Für die Montage werden aus Sicherheitsgründen und zur einfacheren Handhabung zwei Personen benötigt.
• Do not use power tools for assembly, as this may overtighten screws and damage the frame. Hand tools are sufficient and included.
• Place the bed frame on a soft surface (e.g., carpet or rug) during assembly to prevent scratches.
• Überprüfen Sie regelmäßig alle Verbindungen und ziehen Sie diese gegebenenfalls fest, um die Stabilität zu gewährleisten.
• Die maximale Gewichtskapazität von 660 lbs darf nicht überschritten werden.
• Halten Sie Kinder und Haustiere vom Versammlungsbereich fern.

Packungsinhalt

Prüfen Sie, ob alle unten aufgeführten Komponenten in Ihrem Paket enthalten sind. Die Teile können Sie anhand der Montagezeichnung visuell identifizieren.

• Upholstered Headboard with integrated LED lighting and USB ports
• Bettgestell-Seitenteile (links und rechts)
• Bettgestell-Fußteil
• Wooden Slats (24 chunky pine slats)
• Metal Support Bars
• Hardware-Set (Schrauben, Bolzen, Unterlegscheiben, Inbusschlüssel)
• Fernbedienung für LED-Leuchten
• Bedienungsanleitung

Bild: Überview of the bed frame components with key dimensions.

Aufbau- und Montageanleitung

Follow these steps to assemble your JIVOIT Queen Upholstered LED Bed Frame. All necessary tools are included.

1. Auspacken und identifizieren: Carefully unpack all components and lay them out on a clean, soft surface. Identify each part using the provided parts list and diagrams.
2. Befestigen Sie die Seitenteile am Kopfteil: Connect the side rails to the headboard using the designated bolts and washers. Ensure a secure fit but do not overtighten initially.
3. Fußteil anbringen: Connect the footboard to the other end of the side rails. Once all four corners are connected, gently tighten all bolts.
4. Install Metal Support Bars: Place the metal support bars across the frame, ensuring they align with the pre-drilled holes. Secure them with screws. The hardware supporting the metal frame is designed with silent cotton to prevent noise.
5. Holzlatten anbringen: Lay the 24 chunky pine slats across the support bars. The slats are designed to be approximately 5cm apart for optimal mattress support. Secure the slats if your model includes pre-drilled holes or clips.
6. Connect LED and USB Power: Locate the power cable for the LED lights and USB ports, typically found at the back of the headboard. Plug it into a standard wall outlet.
7. Abschließendes Anziehen: Sobald der Rahmen vollständig montiert ist, ziehen Sie alle Schrauben und Bolzen noch einmal fest an.
8. Matratzenposition: Place your Queen-sized mattress directly onto the wooden slats. A box spring is not required for this bed frame.

Image: The assembled bed frame, highlighting its floating design and integrated headboard.

Image: Underside of the bed frame, illustrating the LED strip placement and slat support system.

Bedienungsanleitung

LED Headboard Lighting

The bed frame features integrated LED lighting in the headboard, controlled by a remote. The lights offer various colors, brightness levels, and timer functions.

• Ein-/Ausschalten: Use the "ON" and "OFF" buttons on the remote to control the lights.
• Farbauswahl: Press the colored buttons (R, G, B, W, etc.) to select a static color.
• Modusauswahl: Use "MODE+" and "MODE-" buttons to cycle through various lighting effects (e.g., fade, strobe, flash).
• Helligkeitsanpassung: Use the sun icon buttons (brighter/dimmer) to adjust the light intensity.
• Geschwindigkeitsanpassung: Use "SPEED+" and "SPEED-" buttons to control the speed of dynamic lighting modes.
• Timer-Funktion: Set the lights to turn off automatically after a set period (e.g., 1H, 2H, 4H) using the timer buttons.

Bild: Nahaufnahme view of the headboard with the LED light strip illuminated.

USB-Ladeanschlüsse

The headboard includes built-in USB charging ports for convenience.

• Ensure the bed frame is plugged into a wall outlet for the USB ports to function.
• Insert your device's USB charging cable into one of the available ports.
• The ports are designed to charge various small electronic devices.

Image: Close-up of the integrated USB charging ports located on the headboard.

Wartung

• Reinigung der Polsterung: For general cleaning, gently vacuum the velvet fabric using an upholstery attachment. For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a mild fabric cleaner specifically designed for velvet, testing on an inconspicuous area first.
• Rahmeninspektion: Periodically (every 3-6 months) inspect all bolts and screws to ensure they are tight. Retighten if necessary to maintain the bed's stability and prevent squeaking.
• LED-Leuchten: The LED lights are designed for long-term use. If issues arise, refer to the troubleshooting section. Do not attempt to replace individual LED components.
• USB-Anschlüsse: Keep the USB ports free from dust and debris. Use a soft, dry cloth to clean them if needed.

Fehlerbehebung

Technische Daten

Image: The JIVOIT Queen Upholstered LED Bed Frame in a modern bedroom setting.

Garantie und Support

For any questions regarding assembly, missing parts, or product issues, please contact JIVOIT customer support. Please have your purchase information and model number (Platform Bed) ready when contacting support.

Warranty information may vary by retailer. Please refer to your purchase receipt or the retailer's webEinzelheiten zur Garantie finden Sie auf der Website.