HOMPOW G90
HOMPOW G90 Car Jump Starter User Manual
Modell: G90
Einführung
The HOMPOW G90 Car Jump Starter is a powerful and versatile device designed to jump start 12V vehicle batteries, including all gas engines and diesel engines up to 10L. Beyond its primary function, it also serves as a 20000mAh power bank with fast-charging capabilities and features an integrated LED flashlight for various utility purposes. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting of your device.

Image: The HOMPOW G90 Car Jump Starter unit, smart jump cables, various charging cables, an AC adapter, and a protective carrying case.
Wichtige Sicherheitsinformationen
Bitte lesen und verstehen Sie alle Sicherheitshinweise und Anweisungen, bevor Sie dieses Produkt verwenden. Die Nichtbeachtung dieser Anweisungen kann zu Stromschlag, Brand und/oder schweren Verletzungen führen.
- This unit is designed for jump starting 12V car batteries only. Do not attempt to jump start vehicles with a higher battery rating or different voltage.
- Do not try to restart the vehicle after three consecutive attempts if it doesn't start immediately. Wait for 1 minute to allow the unit to cool down.
- Check your vehicle for other possible reasons why it cannot be restarted if the jump starter does not work.
- For the first use, ensure the unit is fully charged.
- In normal use, confirm the unit has at least 50% power before attempting a jump start.
- The device incorporates 10 smart safety protections including reverse polarity, reverse charging, over-discharge, overcharging, reverse connection, short circuit, overheating, overload, spark resistance, and AI-Software Protection.
- Halten Sie das Gerät von Wasser, Feuchtigkeit und extremen Temperaturen fern.
- Das Gerät darf nicht zerlegt oder modifiziert werden.

Image: Visual representation of the 10 smart safety protections, including No-Spark, Over-Charge, Reverse-Connection, Short-Circuit, Reverse-Polarity, Low-Temp, High-Temp, Over-Voltage, Over-Load, and AI-Software Protection.
Lieferumfang
Upon opening your HOMPOW G90 Car Jump Starter package, you should find the following items:
- 1 x HOMPOW G90 Car Battery Jump Starter Unit
- 1 x Extended Heavy-Duty Jumper Cable (Smart Jump Cable)
- 1 x USB-A-auf-USB-C-Kabel
- 1 x USB-C-auf-USB-C-Kabel
- 1 x 18W AC Adapter
- 1 x Tragetasche
- 1 x Benutzerhandbuch (dieses Dokument)

Image: All components included in the HOMPOW G90 Car Jump Starter package, neatly arranged with their respective labels.
Produkt überview und Spezifikationen
The HOMPOW G90 is a compact yet powerful device designed for emergency vehicle starting and portable power needs.
Hauptmerkmale:
- Leistungsstarker Starthilfe-Booster: 4000 Amps Peak Current, capable of starting 12V vehicles with all gas engines and up to 10L diesel engines. Can perform approximately 60 jump starts on a single charge.
- 20000mAh Powerbank: Equipped with 3 USB outputs (including one Type-C Quick Charge PD 60W port) to charge smartphones, tablets, and laptops up to 75% faster.
- 60W Max Two-way Fast Charging: Bidirectional Type-C input/output port (5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3A) allows for a full charge in as little as 1.5 hours with a compatible 60W charger (18W AC adapter included, takes approx. 4.5 hours).
- Super Large LED Screen: A 3.2-inch LED screen intuitively displays the unit's current working status and battery level.
- LED-Taschenlampe: Features 3 modes: Flashlight, Strobe Light, and SOS Light, useful for emergencies, campSport und Outdoor-Aktivitäten.

Image: An annotated diagram showing the various parts and functions of the HOMPOW G90 unit, such as the Power Button, Super Large LED Screen, USB Outputs, PD 60W Type-C Output/Input, LED Light, and Jump Start Output.
Technische Daten:
| Spezifikation | Wert |
|---|---|
| Marke | HOMPOW |
| Modellnummer | G90 |
| Spitzenausgangsstrom | 4000 Amps |
| Batteriekapazität | 20000mAh (approx. 96.2 Wh) |
| Technische Daten | 8.9 Zoll H x 3.7 Zoll B x 1.6 Zoll T |
| Artikelgewicht | 1.5 Pfund (ca. 1.53 Pfund) |
| Eingang/Ausgang (Typ-C) | PD 60W (5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3A) |
| USB Ausgang 1 | 5 V/2.1 A |
| USB-Ausgang 2 (QC3.0) | 5V/3A, 9V/2A, 12V/1.5A |
| Betriebstemperatur | -4°F bis 140°F (-20°C bis 60°C) |

Image: The HOMPOW G90 unit displayed next to a laptop, illustrating its compact dimensions of 8.9 inches in length, 3.8 inches in width, and 1.7 inches in depth.
Einrichtung und Erstladung
Before first use, it is crucial to fully charge your HOMPOW G90 unit to ensure optimal performance and battery longevity.
- Connect the provided USB-C to USB-C cable or USB-A to USB-C cable to the Type-C input/output port on the jump starter.
- Connect the other end of the cable to the included 18W AC adapter.
- Stecken Sie das Netzteil in eine normale Wandsteckdose.
- The LED screen will display the charging progress. Allow the unit to charge until it reaches 100%.
- A full charge with the included 18W AC adapter takes approximately 4.5 hours. For faster charging, use a compatible PD 60W charger (not included), which can fully charge the unit in about 1.5 hours.
Notiz: Always ensure the unit has at least 50% charge before attempting to jump start a vehicle for reliable operation.
Bedienungsanleitung
A. Starthilfe für ein Fahrzeug
This unit is designed for jump starting 12V car batteries only (all gas engines, up to 10L diesel engines).
- Ensure the HOMPOW G90 unit has at least 50% charge.
- Turn off your vehicle's ignition and all accessories (headlights, radio, etc.).
- Verbinden Sie die rote (+) Klamp Schließen Sie das intelligente Starthilfekabel an den Pluspol (+) der Fahrzeugbatterie an.
- Schließen Sie die schwarze (-) Klamp Schließen Sie das intelligente Starthilfekabel an den Minuspol (-) der Fahrzeugbatterie an.
- Insert the blue plug of the smart jump cable into the jump start output port on the HOMPOW G90 unit. Ensure it is fully inserted.
- The LED screen on the jump starter will indicate readiness. If there are any errors (e.g., reverse polarity), the unit's safety features will prevent operation, and the screen will display a warning.
- Starten Sie den Motor Ihres Fahrzeugs.
- Once the vehicle starts, immediately disconnect the smart jump cable from the HOMPOW G90 unit.
- Trennen Sie dann den schwarzen (-) Stecker.amp von der Fahrzeugbatterie, gefolgt von der roten (+)-Tasteamp.
Wichtig: If the vehicle does not start immediately, wait for 1 minute before the next attempt. Do not try to restart the vehicle after three consecutive attempts as this may damage the unit. If the vehicle still doesn't start, consult a mechanic to check for other issues.

Image: The HOMPOW G90 jump starter unit with its smart cables connected to a car battery, demonstrating its use for starting dead batteries.
B. Using as a Power Bank
The HOMPOW G90 can charge various electronic devices via its USB output ports.
- Connect your device's charging cable to one of the USB output ports (USB 1, USB 2/QC3.0, or Type-C PD 60W) on the jump starter.
- The unit will automatically begin charging your device. The LED screen will show "OUT" indicating power output.
- Sie können bis zu drei Geräte gleichzeitig aufladen.

Image: The HOMPOW G90 unit connected via cables to a smartphone, tablet, and laptop, demonstrating its capability as a 20000mAh power bank with 60W fast charging.
C. Using the LED Flashlight
The integrated LED flashlight offers three modes for different situations.
- To turn on the flashlight, press and hold the power button for a few seconds.
- Press the power button briefly to cycle through the modes:
- Flashlight (steady illumination)
- Strobe Light (rapid flashing)
- SOS Light (Morse code for SOS)
- To turn off the flashlight, press and hold the power button again.

Image: The HOMPOW G90 unit's LED flashlight in operation, showcasing its Flashlight, Emergency Strobe, and SOS modes, along with illustrative scenarios like camping, rescue lighting, outdoor trips, and emergency lighting.
Wartung
Proper maintenance ensures the longevity and reliability of your HOMPOW G90 jump starter.
- Regelmäßiges Laden: To maintain battery health, it is recommended to fully charge the unit every 3-6 months, even if not in use.
- Lagerung: Bewahren Sie das Gerät an einem kühlen, trockenen Ort, vor direkter Sonneneinstrahlung und extremen Temperaturen geschützt auf. Verwenden Sie die mitgelieferte Tragetasche zum Schutz.
- Reinigung: Wischen Sie das Gerät mit einem weichen, trockenen Tuch ab. Verwenden Sie keine scharfen Chemikalien oder Scheuermittel.
- Kabelpflege: Inspect the smart jump cables for any damage (frayed wires, cracked insulation) before each use. Replace if damaged.
Fehlerbehebung
If you encounter issues with your HOMPOW G90, refer to the following common problems and solutions:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Gerät lässt sich nicht einschalten. | Der Akku ist vollständig entladen. | Charge the unit fully using the provided AC adapter or a PD 60W charger. |
| Das Fahrzeug springt nach dem Starthilfeversuch nicht an. | Unit charge too low; incorrect connection; vehicle battery severely damaged; other vehicle issues. | Ensure unit has >50% charge. Check cable connections (red to +, black to -). Wait 1 minute between attempts. If still no start after 3 attempts, consult a mechanic. |
| LED screen displays an error. | Verpolung, Kurzschluss oder andere Sicherheitsmechanismen wurden ausgelöst. | Trennen Sie die Verbindungamps and re-check connections. Ensure correct polarity. If error persists, contact customer service. |
| Geräte werden nicht über USB-Anschlüsse geladen. | Akku des Geräts schwach; falsches Kabel; Gerät nicht kompatibel. | Charge the unit. Try a different USB cable. Ensure your device is compatible with the output specifications. |
Kundenservice
For any questions, concerns, or technical assistance regarding your HOMPOW G90 Car Jump Starter, please do not hesitate to contact our customer service team. Refer to the contact information provided on the product packaging or the official HOMPOW webWebsite.
Wir legen großen Wert darauf, Ihnen exzellenten Support zu bieten und Ihre Zufriedenheit mit unseren Produkten sicherzustellen.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.