PELONIS PHF15RSAPH30
PELONIS 30" Ceramic Tower Space Heater User Manual
Model: PHF15RSAPH30 | Brand: PELONIS
1. Wichtige Sicherheitshinweise
Please read all instructions carefully before using this heater and retain for future reference. Failure to follow these instructions may result in fire, electric shock, serious injury, or death.
- Schließen Sie Heizgeräte immer direkt an eine Wandsteckdose an. Verwenden Sie sie niemals mit einem Verlängerungskabel oder einem verschiebbaren Stromanschluss (Steckdose/Steckerleiste).
- Dieses Heizgerät ist während des Betriebs heiß. Um Verbrennungen zu vermeiden, vermeiden Sie den Kontakt heißer Oberflächen mit bloßer Haut.
- Brennbare Materialien wie Möbel, Kissen, Bettwäsche, Papier, Kleidung und Vorhänge sollten mindestens 0.9 m (3 Fuß) von der Vorderseite des Heizgeräts sowie von den Seiten und der Rückseite entfernt aufgestellt werden.
- Bei der Verwendung eines Heizgeräts durch oder in der Nähe von Kindern oder behinderten Personen sowie immer dann, wenn das Heizgerät in Betrieb und unbeaufsichtigt bleibt, ist äußerste Vorsicht geboten.
- Betreiben Sie kein Heizgerät mit beschädigtem Kabel oder Stecker oder nachdem das Heizgerät nicht richtig funktioniert, fallen gelassen oder in irgendeiner Weise beschädigt wurde.
- Nicht im Freien verwenden.
- Um die Heizung zu trennen, stellen Sie die Bedienelemente auf AUS und ziehen Sie dann den Stecker aus der Steckdose.
- Führen Sie keine Fremdkörper in die Belüftungs- oder Abluftöffnungen ein und lassen Sie nicht zu, dass diese in diese eindringen. Dies kann zu einem Stromschlag oder Brand führen oder das Heizgerät beschädigen.
- Um einen möglichen Brand zu verhindern, blockieren Sie die Luftein- und -auslassöffnungen in keiner Weise. Verwenden Sie das Gerät nicht auf weichen Oberflächen wie einem Bett, wo die Öffnungen blockiert werden könnten.
- This heater includes a Tip-Over Safety Switch and Overheating Protection for enhanced safety. If the heater tips over or overheats, it will automatically shut off.

Image: Visual representation of Tip-Over and Overheat Protection features.
2. Produktüberschreitungview
The PELONIS 30" Ceramic Tower Space Heater provides efficient and reliable warmth for small to medium-sized rooms. Featuring PTC ceramic heating technology, it delivers instant and directional heat, improving indoor temperature quickly.
Bild: Vorderseite view of the PELONIS 30" Ceramic Tower Space Heater with its remote control.
Hauptmerkmale:
- Rapid Heating & Constant Temperature: Utilizes PTC ceramic heating to reach 70°F in 3 seconds, maintaining a consistent and comfortable temperature.
- Breiter Heizbereich: 30" tower design covers up to 280 ft² with 75° wide oscillation for even heat distribution.
- Einfach zu bedienen: Digital panel and remote control allow for precise temperature adjustment (1°F increments) and an extra-long 12-hour timer.
- Quiet Settings: Offers 4 functions (High, Low, ECO, Fan) with operation noise below 55dB, ideal for bedrooms and offices.
- Umfassender Sicherheitsschutz: Constructed from V0 flame retardant materials, includes overheating and tip-over switch protection.
3. Installationsanleitung
3.1 Auspacken
- Nehmen Sie das Heizgerät vorsichtig aus der Verpackung.
- Check the contents for any damage or missing parts. If any issues are found, contact customer support.
3.2 Platzierung
- Stellen Sie das Heizgerät auf eine feste, ebene Fläche.
- Ensure there are no obstructions within 3 feet (0.9 m) of the front, sides, and rear of the heater.
- Do not place the heater on soft surfaces like rugs or carpets that may block air vents.
Image: The PELONIS heater positioned in a room, illustrating its 75° oscillation and 280 ft² maximum coverage.
3.3 Stromanschluss
- Plug the heater directly into a 110V AC, 60Hz wall outlet.
- Do not use extension cords, power strips, or surge protectors.
4. Bedienungsanleitung
4.1 Bedienfeld und Fernbedienung
The heater can be operated using the touch-sensitive control panel on top of the unit or the included remote control. Both offer full functionality.
Bild: Detailliert view of the heater's digital control panel with temperature display and function buttons.
Image: The PELONIS heater shown alongside its compact remote control.
4.2 Ein-/Ausschalten
- Drücken Sie die Netztaste (
) über das Bedienfeld oder die Fernbedienung, um die Heizung EIN- oder AUSzuschalten.
4.3 Temperatur einstellen
- Verwenden Sie die + Und - buttons to adjust the desired temperature from 41°F to 95°F in 1°F increments.
4.4 Modi auswählen
- Drücken Sie die Mode-Taste (
) to cycle through the 4 available settings: High (1500W), Low (900W), ECO, and Fan only. - In ECO mode, the heater automatically adjusts power consumption to maintain the set temperature efficiently.
Image: The heater's ECO mode, illustrating up to 40% energy savings compared to other heaters.
4.5 Schwingungsfunktion
- Drücken Sie die Oszillationstaste (
) to activate or deactivate the 75° wide oscillation feature for broader heat distribution.
4.6 Timer-Funktion
- Drücken Sie die Timer-Taste (
) to set the auto-off timer from 1 to 12 hours. The heater will automatically turn off after the set time.
5. Wartung und Lagerung
5.1 Reinigung
- Vor der Reinigung muss das Heizgerät immer vom Stromnetz getrennt und vollständig abgekühlt sein.
- Verwenden Sie ein weiches,amp Tuch zum Abwischen der Außenflächen des Heizgeräts.
- Do not use abrasive cleaners, polishes, or any chemical solutions as these may damage the heater's finish.
- Saugen Sie die Lufteinlass- und Auslassgitter vorsichtig ab, um Staub- und Flusenablagerungen zu entfernen.
5.2 Speicherung
- When not in use, store the heater in its original packaging or a suitable container.
- An einem kühlen, trockenen Ort aufbewahren und vor direkter Sonneneinstrahlung und extremen Temperaturen schützen.
6. Anleitung zur Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Heizung schaltet sich nicht ein | Nicht eingesteckt Netzschalter ausschalten Tip-over switch activated Überhitzung | Ensure plug is securely in outlet Schalten Sie den Netzschalter auf ON Place heater upright on a flat surface Unplug and allow to cool for 30 minutes before restarting |
| Keine Heizleistung | Low mode selected Temperatureinstellung zu niedrig | Select High mode Increase desired temperature setting |
| Oszillation funktioniert nicht | Die Oszillationsfunktion ist deaktiviert. | Press the Oscillation button to activate |
7. Produktspezifikationen
| Spezifikation | Detail |
|---|---|
| Marke | Pelonis |
| Modellnummer | PHF15RSAPH30 |
| Wärmeabgabe | 1500 Watt |
| Bandtage | 110 Volt |
| AmpAlter | 12.5 Amps |
| Technische Daten | 7.09"T x 6.93"B x 30"H |
| Artikelgewicht | 6.78 Pfund |
| Besondere Merkmale | Adjustable Temperature, Fast Heating, 75° Oscillation, 12H Timer, Tip-Over Switch, Overheating Protection |
Image: The PELONIS heater with its key dimensions (height, width, depth) indicated.
8. Garantie und Kundendienst
For detailed warranty information, please refer to the warranty card included with your product or visit the official PELONIS webWebsite.
If you have any questions, require technical assistance, or need to report an issue, please contact PELONIS customer support through their official channels.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.