ONVIAN 2000 Lumen wiederaufladbarer Fahrradscheinwerfer – Benutzerhandbuch

1. Einleitung

Thank you for choosing the ONVIAN 2000 Lumen Rechargeable Bike Headlight. This manual provides essential information for the safe and effective use of your new bike light. Please read it thoroughly before installation and operation, and retain it for future reference.

2. Sicherheitshinweise

• Vor Fahrtantritt unbedingt sicherstellen, dass die Lampe sicher befestigt ist.
• Schauen Sie nicht direkt in den Lichtstrahl, um eine vorübergehende Sehbeeinträchtigung zu vermeiden.
• Halten Sie das Licht von Kindern fern.
• Use only the provided USB-A to USB-C cable for charging. Using other USB-C cables or power delivery (PD) chargers may not work or could potentially damage the device due to non-standard USB-C implementation.
• Vermeiden Sie es, die Lampe auseinanderzunehmen, da dies zum Verlust der Garantie und zu Schäden führen kann.
• Ensure the USB-C port cover is properly sealed when not charging to maintain water resistance.

3. Packungsinhalt

Überprüfen Sie, ob alle Artikel in Ihrem Paket vorhanden sind:

• ONVIAN 2000 Lumen Bike Headlight
• Aluminum Alloy Handlebar Bracket
• USB-A auf USB-C Ladekabel
• Various Shims and Non-slip Pads for Handlebar Mounting

4. Produktmerkmale

• Helligkeit: Up to 2000 Lumens for enhanced visibility.
• Beleuchtungsmodi: Four distinct modes: Low Beam, High Beam, Low+High Beam, and Flashing.
• Batterie: Integrated 4000mAh rechargeable Lithium-Ion battery.
• Laden: USB-C port (5V/2A input) with blue power indicators.
• Konstruktion: Durable aluminum alloy housing.
• Wasserbeständigkeit: Wasserdichtigkeitsklasse IPX5.
• Installation: Tool-free mounting system for handlebars 20-30mm in diameter.
• Trägerkonstruktion: German anti-glare design to prevent dazzling oncoming traffic and pedestrians.

Image: Key features of the ONVIAN Bike Headlight, including its 2000 lumen output and multiple modes.

Image: Illustration of the anti-glare German design, demonstrating how it prevents blinding pedestrians and drivers.

5. Einrichtung und Installation

The ONVIAN bike headlight features a tool-free installation process.

1. Bereiten Sie die Turnierübersicht vor: Select the appropriate shims and non-slip pads to match your handlebar diameter (20-30mm). Place them inside the handlebar connector.
2. Am Lenker befestigen: Position the bracket on your bicycle handlebar. Tighten the knob by hand until the bracket is secure and does not move freely.
3. Mount the Headlight: Slide the ONVIAN headlight onto the bracket until it clicks into place. Ensure it is firmly seated.
4. Winkel anpassen: The headlight can be easily twisted and adjusted to the desired angle for optimal illumination.
5. Entfernung: To remove, simply twist the light off the bracket. The bracket can remain on the handlebar.

Image: Step-by-step installation guide for the bike headlight on a handlebar.

6. Bedienungsanleitung

The ONVIAN bike headlight features a single ON/OFF button to control all lighting modes.

1. Einschalten: Press the ON/OFF button located on the side of the light to turn it on.
2. Zyklusmodi: Each subsequent press of the ON/OFF button will cycle through the four available lighting modes in the following order:
   • Abblendlicht: The two outer lights illuminate.
   • Fernlicht: The center light illuminates.
   • Low + High Beam: All three lights illuminate for maximum brightness.
   • Blinkt: All lights flash.
3. Ausschalten: After cycling through all modes, pressing the button again will turn the light off.

Image: Visual representation of the four distinct lighting modes.

7. Ladeanweisungen

The bike headlight is equipped with a built-in 4000mAh rechargeable battery.

1. Ladegerät anschließen: Open the protective cover over the USB-C port on the side of the light. Connect the provided USB-A to USB-C charging cable to the light and a compatible 5V/2A USB power source.
2. Aufladen des Monitors: Blue power indicator lights on the side of the light will illuminate to show charging progress.
3. Volle Ladung: A full charge typically takes approximately 4.5 hours. All blue indicator lights will remain solid when fully charged.
4. Akkulaufzeit: The light offers a run time of 2-3.5 hours on low and flash modes, and up to 4 hours on high beam, depending on the selected mode.
5. Seal Port: After charging, ensure the USB-C port cover is securely closed to maintain the light's waterproof integrity.

Image: The USB-C charging port and battery indicator lights during charging.

Image: Battery specifications and estimated run times for each lighting mode.

8. Wartung

• Reinigung: Wischen Sie die Außenseite der Lampe mit einem weichen, fusselfreien Tuch ab.amp Tuch. Keine Scheuer- oder Lösungsmittel verwenden.
• Lagerung: Store the light in a cool, dry place when not in use. For long-term storage, charge the battery to approximately 50% every 3-6 months to prolong battery life.
• Wasserbeständigkeit: Regularly check the USB-C port cover for proper sealing to ensure water resistance.
• Batteriepflege: Vermeiden Sie es, den Akku häufig vollständig zu entladen, da dies seine Lebensdauer verkürzen kann.

9. Fehlerbehebung

10. Spezifikationen

11. Garantie und Support

For warranty information or technical support, please contact Onvian customer service through the retailer where the product was purchased or visit the official Onvian store page:

Visit the Onvian Store

Please have your model number (B0CKP7NPWT) and purchase details ready when contacting support.