Varmilo VPE87 Chang'e TKL Mechanische Tastatur – Benutzerhandbuch

Einführung

The Varmilo VPE87 TKL mechanical keyboard is designed for versatility and a premium typing experience. It features triple-mode connectivity (wired, Bluetooth, and 2.4 GHz wireless), hotswap sockets for switch customization, and a white LED backlight. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal use of your keyboard.

Packungsinhalt

• Varmilo VPE87 Mechanical Keyboard
• USB-C-Kabel
• 2.4 GHz Wireless Receiver (typically stored in keyboard)
• Tastenkappenabzieher (kann enthalten sein)
• Schalterzieher (kann enthalten sein)

Aufstellen

Before using your Varmilo VPE87 keyboard, please follow these steps to set it up.

1. Physical Connection and Initial Charge

Image: USB-C port and 3-way cord channel. The USB-C port is located on the back of the keyboard, designed to allow the cable to exit from the left, right, or center for tidy cable management.

1. Verbinden Sie das mitgelieferte USB-C-Kabel mit dem USB-C-Anschluss der Tastatur.
2. Connect the other end of the USB-C cable to an available USB port on your computer or a USB power adapter.
3. For wireless use, ensure the keyboard is sufficiently charged. The white LED backlight will indicate charging status (specific indicator behavior may vary, refer to LED section).

2. Einstellen des Tastaturwinkels

Bild: Seitenansichtfile with kickstand extended. The keyboard features a 2-step kickstand on the underside, allowing users to adjust the typing angle for ergonomic comfort.

The VPE87 features a 2-step kickstand on its underside. Gently flip out the kickstands to adjust the keyboard's angle to your preferred typing position.

Bedienungsanleitung

Konnektivitätsmodi

The Varmilo VPE87 supports three connectivity modes: Wired, Bluetooth, and 2.4 GHz Wireless. You can switch between modes using the dedicated switch or key combinations, typically located on the back or side of the keyboard.

Kabelgebundener Modus

• Verbinden Sie das USB-C-Kabel der Tastatur mit Ihrem Computer.
• Die Tastatur wird von Ihrem Betriebssystem automatisch erkannt.
• This mode also charges the keyboard's internal battery.

Bluetooth-Modus

• Ensure the keyboard is in Bluetooth mode (check the switch on the back/side).
• Aktivieren Sie auf Ihrem Gerät (Computer, Tablet, Smartphone) Bluetooth und suchen Sie nach neuen Geräten.
• Select "Varmilo VPE87" (or similar name) from the list of available devices.
• Follow any on-screen prompts to complete pairing. The keyboard may support multiple Bluetooth profiles (e.g., Fn + 1, 2, 3 for different devices). Refer to specific key combinations for your model.

2.4 GHz Wireless-Modus

• Locate the 2.4 GHz USB receiver (often stored in a compartment on the keyboard's underside).
• Stecken Sie den USB-Empfänger in einen freien USB-Port Ihres Computers.
• Ensure the keyboard is in 2.4 GHz wireless mode (check the switch on the back/side).
• Die Tastatur sollte automatisch eine Verbindung zum Empfänger herstellen.

Steuerung der Hintergrundbeleuchtung

Image: Keyboard with white LED backlight. The white LED backlight enhances visibility of the keycaps, especially in low-light conditions.

The VPE87 features a white LED backlight. Use the following key combinations to control the backlight:

• Fn + Arrow Up: Hintergrundbeleuchtungshelligkeit erhöhen.
• Fn + Arrow Down: Decrease backlight brightness / Turn off backlight.
• Fn + andere Tasten: (Specific to model) May control backlight effects or modes. Refer to the keyboard's keycap legends for additional functions.

Hotswap Sockets (Switch Customization)

Bild: Oben view of the Varmilo VPE87 keyboard. This image displays the keyboard's layout and the artistic design on its keycaps and case, highlighting its aesthetic appeal.

The VPE87 is equipped with hotswap sockets, allowing you to change mechanical switches without soldering. This enables customization of your typing feel.

1. Tastenkappe entfernen: Use a keycap puller to gently remove the desired keycap.
2. Schalter entfernen: Use a switch puller to carefully grip the top and bottom clips of the switch and pull it straight up.
3. Neuen Schalter einfügen: Align the pins of the new switch with the holes in the hotswap socket. Gently push the switch straight down until it clicks into place. Ensure pins are not bent.
4. Tastenkappe austauschen: Setzen Sie die Tastenkappe wieder auf den neuen Schalter.

Note: Ensure the keyboard is disconnected or powered off before swapping switches. Use compatible 3-pin or 5-pin mechanical switches.

Andere Eigenschaften

• Double-layer Silicone Sound Absorption: This design minimizes typing noise for a quieter experience.
• 3-Way Cord Channel: The USB-C cable can be routed from the left, right, or center of the keyboard's underside for neat cable management.

Wartung

Proper maintenance ensures the longevity and performance of your Varmilo VPE87 keyboard.

• Reinigung der Tastenkappen:
  • Use a keycap puller to remove keycaps.
  • Tastenkappen mit einem Tuch abwischenamp cloth and mild soap solution. Avoid harsh chemicals.
  • Ensure keycaps are completely dry before reattaching.
• Reinigung des Tastaturgehäuses:
  • Verwenden Sie ein weiches, trockenes Tuch, um die Tastaturoberfläche abzuwischen.
  • Für Staub und Schmutz zwischen den Tasten verwenden Sie Druckluft.
• Lagerung: Bewahren Sie die Tastatur an einem kühlen, trockenen Ort fern von direkter Sonneneinstrahlung und extremen Temperaturen auf.
• Verschüttete Flüssigkeiten: In case of a liquid spill, immediately disconnect the keyboard, turn it upside down to drain, and allow it to dry completely for at least 24-48 hours before attempting to use it again. Do not use a hairdryer or heat gun.

Fehlerbehebung

If you encounter issues with your Varmilo VPE87 keyboard, try the following solutions:

Technische Daten

Garantie und Support

Varmilo products are designed for quality and durability. For specific warranty information, please refer to the warranty card included with your product or visit the official Varmilo webWebsite.

For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact Varmilo customer service through their official channels. You can often find support contact information on the brand's official weboder über den Händler, bei dem Sie das Produkt gekauft haben.

Visit the official Varmilo Store for more information: Varmilo Store on Amazon