RECOIL REQ7 7-Band Car Audio Equalizer User Manual

1. Einleitung

This manual provides detailed instructions for the installation, operation, and maintenance of your RECOIL REQ7 7-Band Car Audio Parametric Graphic Equalizer. Please read this manual thoroughly before using the product to ensure proper function and to prevent damage.

2. Hauptmerkmale

• 7-Band High Performance Car Audio 1/2 DIN Pre-Amp Electronic Equalizer.
• Fully Adjustable -12 dB to +12 dB EQ Bands (50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz, 6kHz and 16kHz).
• 2 channels of speaker level inputs & 6 channels of RCA outputs (front, rear, sub).
• Auxiliary stereo RCA input & front panel auxiliary stereo input.
• Separate level controls on front of EQ for convenience (master, sub, front/rear fader, main/auxiliary inputs).
• Exceptional 83 dB signal-to-noise performance.
• Extended frequency response from 20 Hz to 30 kHz.
• Hohe Lautstärketage (Max Output Voltage 7V) Premium Tiffany RCA connectors.
• ISO mounting holes and removable trim ring for custom installation.
• Includes installation brackets and hardware.

3. Sicherheitshinweise

Beachten Sie bei der Installation und dem Betrieb stets die folgenden Sicherheitsvorkehrungen:

• Disconnect the vehicle's negative battery terminal before any electrical work.
• Stellen Sie sicher, dass alle Kabel korrekt verlegt und befestigt sind, um Beschädigungen oder Kurzschlüsse zu vermeiden.
• Do not operate the unit in wet conditions or expose it to excessive moisture.
• Wenn Sie sich bei einzelnen Installationsschritten unsicher sind, wenden Sie sich an einen professionellen Car-Audio-Einbauer.
• Avoid adjusting audio settings while driving to maintain focus on the road.

4. Packungsinhalt

Überprüfen Sie, ob alle Artikel im Paket vorhanden sind:

• RECOIL REQ7 Equalizer Unit
• Montagehalterungen
• Befestigungsmaterial (Schrauben usw.)
• Power/Ground Wiring Harness
• Benutzerhandbuch (dieses Dokument)

5. Produktüberschreitungview

5.1 Bedienelemente auf der Vorderseite

Image: Front panel of the RECOIL REQ7 equalizer, showing the seven EQ band controls, master volume, subwoofer level, fader, and auxiliary input.

• UNTEREBENE: Regelt den Ausgangspegel des Subwoofer-Kanals.
• VOLUMEN: Master-Lautstärkeregler für alle Kanäle.
• AUX S/W: Switch to select between Main and Auxiliary input.
• AUX-IN: 3.5mm stereo jack for auxiliary audio input.
• FADER: Balances the audio output between front and rear channels.
• EQ Bands (50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz, 6kHz, 16kHz): Seven individual rotary controls to adjust the gain (-12dB to +12dB) for specific frequency ranges.

5.2 Anschlüsse auf der Rückseite

Image: Rear panel of the RECOIL REQ7 equalizer, displaying RCA inputs (Main In, Aux In, Hi Input), RCA outputs (Front Out, Rear Out, Sub Out), and power connection.

• SUB OUT (L/R): RCA outputs for connecting to a subwoofer ampschwerer.
• AUX-Eingang (L/R): RCA inputs for auxiliary audio sources.
• HI INPUT (L/R): Speaker level inputs for connecting to a factory head unit without RCA outputs.
• MAIN IN (L/R): RCA inputs for the primary audio source (e.g., head unit).
• REAR OUT (L/R): RCA outputs for connecting to a rear channel ampschwerer.
• FRONT OUT (L/R): RCA outputs for connecting to a front channel ampschwerer.
• LEISTUNG: Connection terminal for power, ground, and remote turn-on wires.
• LOW PASS FREQUENCY Switch (90Hz/60Hz): Selects the low-pass crossover frequency for the subwoofer output.

6. Installation

Proper installation is crucial for optimal performance. If you are not comfortable with car audio wiring, seek professional assistance.

6.1 Montage

1. Choose a suitable mounting location that is dry, well-ventilated, and accessible for adjustments. The REQ7 is a 1/2 DIN size, allowing for flexible placement.
2. Use the provided mounting brackets and hardware to secure the equalizer. Ensure the unit is firmly attached to prevent vibration.
3. The removable trim ring can be used for custom installations to achieve a flush look.

6.2 Kabelverbindungen

Refer to the diagram below for typical wiring connections.

Bild: Draufsicht view of the RECOIL REQ7 equalizer, illustrating the various input and output connections for a car audio system.

• Power (RED wire): Connect to a fused +12V constant power source from the vehicle's battery.
• Ground (BLACK wire): Connect to a clean, solid chassis ground point in the vehicle. Ensure good metal-to-metal contact.
• Remote (BLUE wire): Connect to the remote turn-on output of your head unit or other switched +12V source. This turns the equalizer on/off with your audio system.
• Audioeingänge:
  • RCA Inputs (MAIN IN / AUX IN): Schließen Sie RCA-Kabel von den Vor-/Unterbuchsen Ihres Autoradios an.amp outputs to the MAIN IN. Use AUX IN for additional RCA sources.
  • High Level Inputs (HI INPUT): If your head unit does not have RCA outputs, connect the speaker wires directly to the HI INPUT terminals.
• Audio Outputs (FRONT OUT / REAR OUT / SUB OUT): Connect RCA cables from these outputs to the corresponding inputs on your external amplifizierer.

7. Bedienungsanleitung

7.1 Erstes Einschalten

1. After completing all wiring, reconnect the vehicle's negative battery terminal.
2. Turn on your head unit. The REQ7 should power on automatically via the remote wire.
3. Start with all EQ bands at their center (flat) position, master volume low, and subwoofer level low.

7.2 Anpassen der Audioeinstellungen

• Quellenauswahl: Verwenden Sie die AUX S/W switch to toggle between the MAIN IN (RCA from head unit) and AUX IN (front panel 3.5mm or rear RCA auxiliary inputs).
• Master-Lautstärke: Erhöhen Sie langsam die VOLUMEN Stellen Sie den Regler auf eine angenehme Hörlautstärke ein.
• Subwoofer-Pegel: Passen Sie die UNTEREBENE knob to blend the subwoofer output with the main speakers.
• FADER Control: Verwenden Sie die FADER knob to balance the sound between the front and rear speakers.
• Ausgleich: Passen Sie die individuelle EQ-Band controls (50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz, 6kHz, 16kHz) to fine-tune the audio frequency response to your preference. Increase (+) to boost a frequency, decrease (-) to cut it.
• Tiefpassfilter: Verwenden Sie die TIEFPASSFREQUENZ switch on the rear panel to select the desired crossover point (60Hz or 90Hz) for the subwoofer output. This ensures only low frequencies are sent to the subwoofer.

8. Wartung

• Halten Sie das Gerät sauber und staubfrei. Verwenden Sie zum Reinigen ein weiches, trockenes Tuch.
• Verwenden Sie keine aggressiven Chemikalien oder Scheuermittel.
• Ensure all connections remain secure over time. Periodically check wiring for any signs of wear or corrosion.

9. Fehlerbehebung

10. Spezifikationen

11. Garantie und Support

RECOIL products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official RECOIL webBewahren Sie Ihren Kaufbeleg als Kaufnachweis auf.

For further assistance, you may contact RECOIL customer support through their official channels.