CLXEAST 18 Inch Illuminated Outdoor Indoor Atomic Analog Wall Clock with Temperature & Humidity Combo

1. Einleitung

This manual provides detailed instructions for the setup, operation, and maintenance of your CLXEAST 18-inch Illuminated Outdoor/Indoor Atomic Analog Wall Clock. This clock features atomic time synchronization, a smart LED light sensor for automatic illumination, and integrated temperature and humidity displays. Designed for both indoor and outdoor use, it is UV resistant and weatherproof.

Abbildung 1: Vorderseite view of the CLXEAST 18-inch Atomic Analog Wall Clock.

2. Sicherheitshinweise

• Ensure the clock is mounted securely to prevent falling.
• Verwenden Sie ausschließlich die angegebenen Batterietypen und achten Sie bei der Installation auf die richtige Polarität.
• Do not expose the clock to extreme temperatures beyond its operating range (-40°F to 140°F).
• Avoid direct, prolonged exposure to harsh elements like intense sunlight or constant heavy rain to maximize product lifespan, despite its weatherproof design.
• Bewahren Sie Batterien außerhalb der Reichweite von Kindern auf.

3. Packungsinhalt

• 1 x CLXEAST 18 Inch Illuminated Outdoor/Indoor Atomic Analog Wall Clock
• 1 x Bedienungsanleitung (evtl. nicht in deutscher Sprache).
• Note: Batteries (1 x AA, 4 x D) are not included.

4. Einrichtung

4.1 Einlegen der Batterie

1. Suchen Sie die Batteriefächer auf der Rückseite der Uhr.
2. Insert 1 AA battery into the central compartment for the clock's atomic movement. Ensure correct polarity.
3. Insert 4 D-size batteries into the two larger compartments (two in each) for the LED light sensor. Ensure correct polarity.
4. Securely close all battery covers.

Abbildung 2: Rückseite view of the clock with battery compartments.

4.2 Time Zone and Daylight Saving Time (DST) Settings

1. On the back of the clock, locate the time zone selector switch (P, M, C, E for Pacific, Mountain, Central, Eastern). Slide the switch to your desired time zone.
2. Locate the DST (Daylight Saving Time) switch. Set it to 'ON' for automatic adjustment or 'OFF' to disable DST adjustment.

Figure 3: Time zone and DST adjustment switches.

4.3 Atomzeitsynchronisation

After battery installation and setting the time zone, the clock will automatically attempt to synchronize with the WWVB radio transmission from Fort Collins, CO. This process ensures accurate timekeeping to the second. The clock hands may move rapidly as it searches for the signal and sets itself. Allow up to 24 hours for initial synchronization, especially in areas with weak signals.

Figure 4: Clock face with atomic signal indicator.

4.4 Thermometer & Hygrometer Calibration

The built-in thermometer and hygrometer sensors require approximately 3 hours to fully calibrate to the ambient environment. For accurate readings, allow this time after placing the clock in its desired location.

Abbildung 5: Ausführlich view of temperature and humidity gauges.

4.5 Montage

The clock features a keyhole slot on the back for easy wall mounting. Choose a location that is visible and, for outdoor use, ideally protected from direct, prolonged exposure to extreme weather conditions to ensure longevity.

Figure 6: Clock displayed in an outdoor patio setting.

Figure 7: Clock displayed in an indoor living room setting.

5. Bedienungsanleitung

5.1 Smart LED Light Sensor

The clock is equipped with a smart light sensor that automatically activates a warm, ambient dial backlight during dark conditions and turns off in normal daylight. There are two backlight modes: 'Always On' and 'Always Off'. You can select your preferred mode using the switch on the back of the clock.

Figure 8: Daytime and illuminated nighttime view der Uhr.

Figure 9: Close-up of the illuminated clock face.

5.2 Reading Time, Temperature, and Humidity

The large analog display clearly shows the current time. The smaller gauges on the clock face indicate the ambient temperature in Fahrenheit and Celsius, and the relative humidity percentage.

6. Wartung

• Reinigung: Wipe the clock with a soft, damp cloth. Avoid using abrasive cleaners or solvents that may damage the finish or display.
• Batteriewechsel: Replace batteries when the clock hands stop moving or the LED illumination dims significantly. It is recommended to replace all D-size batteries simultaneously for optimal LED performance.

7. Fehlerbehebung

8. Spezifikationen

9. Garantie und Support

For information regarding product warranty, returns, or technical support, please refer to the retailer's policy or visit the official CLXEAST store. Extended protection plans may be available for purchase through the retailer.

Besuchen Sie die CLXEAST Store für weitere Produkte und Support.