Amazon Basics Automatic Pet Feeder with Cooling Pack

1. Einleitung

Thank you for choosing the Amazon Basics Automatic Pet Feeder with Cooling Pack. This device is designed to help you manage your pet's feeding schedule by automatically dispensing dry pet food meals and treats. It features a programmable timer and includes a cooling pack to help keep food fresh. Please read this manual thoroughly before use to ensure proper operation and maintenance.

Abbildung 1: Oben view of the Amazon Basics Automatic Pet Feeder.

2. Sicherheitshinweise

• This product is for pet use only.
• Do not submerge the unit in water. The feeder tray is removable for cleaning.
• Stellen Sie sicher, dass der Futterautomat auf einer stabilen, ebenen Fläche steht, um ein Umkippen zu verhindern.
• Außerhalb der Reichweite von Kindern aufbewahren.
• Use only dry pet food. Do not use wet food without the cooling pack, and ensure the cooling pack is properly frozen if using wet food.
• Batteries are not included. Use 3 AA batteries. Replace batteries within 1 minute to keep settings.
• Do not force the rotation of the food tray manually.

3. Packungsinhalt

Before setting up your feeder, please verify that all components are present:

• Automatische Futterstation für Haustiere
• Herausnehmbarer Speisebehälter (6 Fächer)
• Cooling Pack (2 pieces)
• Bedienungsanleitung

Abbildung 2: Explosionsdarstellung view of the feeder components.

Unboxing-Video

Video 1: An unboxing demonstration of a similar automatic pet feeder, showing typical package contents and initial setup steps.

4. Produktüberschreitungview

Familiarize yourself with the main parts of your automatic pet feeder:

• Oberer Deckel: Covers the food tray and programming interface.
• Essenstablett: Contains 6 individual compartments for pet food.
• Bedienfeld: Located on the top, it includes an LCD display and buttons for setting time and schedules.
• Cooling Pack Compartment: Located beneath the food tray, designed to hold the cooling packs.
• Batteriefach: Located on the underside of the unit.

Figure 3: Product dimensions for the Amazon Basics Automatic Pet Feeder.

5. Einrichtung

5.1 Einlegen der Batterie

1. Drehen Sie den Futterspender um.
2. Suchen Sie den Deckel des Batteriefachs.
3. Öffnen Sie den Deckel und legen Sie 3 neue AA-Batterien ein. Achten Sie dabei auf die richtige Polarität (+/-).
4. Schließen Sie den Batteriefachdeckel fest.

Abbildung 4: Unten view of the feeder with the battery compartment indicated.

5.2 Cooling Pack Preparation

For wet food or to keep dry food fresh longer, use the included cooling packs:

1. Place the cooling packs horizontally in a freezer until completely frozen.
2. Remove the food tray from the feeder.
3. Place the frozen cooling packs into the designated compartment at the base of the feeder.
4. Reinsert the food tray.

Figure 5: Proper method for freezing the cooling pack.

5.3 Befüllen von Speisentabletts

1. Öffnen Sie den oberen Deckel des Futterhäuschens.
2. Fill each of the 6 compartments of the food tray with the desired amount of dry pet food or treats.
3. Schließen Sie den oberen Deckel fest.

6. Bedienungsanleitung

The feeder allows you to program up to 6 meals per day. The tray will rotate to expose the next meal at the scheduled time.

6.1 Einstellen der aktuellen Uhrzeit

1. Press and hold the 'SET' button until the hour digits on the LCD display start flashing.
2. Use the 'UP' or 'DOWN' arrow buttons to adjust the hour.
3. Press 'SET' again to move to the minute digits, then use 'UP' or 'DOWN' to adjust the minutes.
4. Press 'SET' one more time to confirm and save the current time.

6.2 Programmierung von Fütterungsplänen

You can program up to 6 meal times. Each meal corresponds to one compartment of the food tray.

1. After setting the current time, press 'SET' to enter the first meal setting (P1). The hour digits for P1 will flash.
2. Use 'UP' or 'DOWN' to set the desired hour for the first meal.
3. Press 'SET' to move to the minute digits, then use 'UP' or 'DOWN' to adjust the minutes.
4. Press 'SET' to confirm P1 and move to the next meal setting (P2).
5. Repeat steps 2-4 for up to 6 meals (P1-P6). If you do not wish to set all 6 meals, simply press 'SET' to skip to the next program or exit programming mode.
6. After setting all desired meals, press 'SET' until the display returns to the current time. The feeder is now programmed.

6.3 Manuelle Fütterung

To dispense a meal immediately, press the 'MANUAL' button. The tray will rotate to the next available compartment.

Figure 6: A pet enjoying a meal from the automatic feeder.

7. Wartung

7.1 Reinigung

The food tray is dishwasher safe for easy cleaning. The main unit should be wiped clean with a damp Tuch. Tauchen Sie das Hauptgerät nicht in Wasser ein.

1. Remove the top lid and food tray.
2. Wash the food tray in the dishwasher or by hand with warm, soapy water.
3. Wischen Sie das Hauptgerät mit adamp cloth, ensuring no water enters the battery compartment or control panel.
4. Lassen Sie alle Teile vollständig trocknen, bevor Sie sie wieder zusammenbauen.

7.2 Batteriewechsel

When the battery indicator on the LCD display shows low power, replace the batteries promptly. To retain your settings, replace all 3 AA batteries within 1 minute.

8. Fehlerbehebung

9. Spezifikationen

• Modell: DE116471
• Marke: Amazon-Grundlagen
• Material: Polyethylenterephthalat
• Farbe: Weiß
• Abmessungen: 31.5 x 31.5 x 7.59 cm (12.4 x 12.4 x 3.0 Zoll)
• Gewicht: 640 g
• Leistung: 3 x AA-Batterien (nicht im Lieferumfang enthalten)
• Hersteller: Amazonas
• Ursprungsland: China

10. Garantie und Support

This Amazon Basics product is backed by a limited warranty. For specific warranty details, please refer to the warranty information provided at the time of purchase or visit the Amazon Basics webWebsite.

For customer support, troubleshooting assistance, or to inquire about replacement parts, please contact Amazon customer service through your Amazon account or the Amazon Basics support page.