MCGOR 10-inch Rechargeable Motion Sensor Under Cabinet Lighting Instruction Manual

1. Einleitung

Thank you for choosing the MCGOR 10-inch Rechargeable Motion Sensor Under Cabinet Lighting. This product is designed to provide convenient, energy-efficient illumination for various indoor spaces such as kitchens, closets, stairs, and hallways. Featuring a motion sensor, dimmable brightness, and easy magnetic installation, these lights enhance visibility and safety.

Two MCGOR 10-inch under cabinet lights in their packaging, highlighting features like motion sensor, 40 LEDs, dimmable, rechargeable, and magnetic installation.

Image 1.1: MCGOR 10-inch Under Cabinet Lights (2-Pack)

2. Packungsinhalt

Bitte überprüfen Sie, ob alle unten aufgeführten Artikel in Ihrem Paket enthalten sind:

2 x MCGOR 10-inch Cabinet Lights
2 x USB-C Charging Cords
6 x selbstklebende Eisenplatten
6 x Schrauben
1 x Bedienungsanleitung (evtl. nicht in deutscher Sprache).

3. Produktmerkmale

Bewegungssensor-Modus: Automatically activates when motion is detected within 120° and 10 feet in low-light conditions, turning off after approximately 20 seconds of no motion.
Dimmbare Helligkeit: Features 5 levels of brightness adjustment to suit various lighting needs, from task lighting to a subtle night light.
Always-On-Modus: Allows the light to remain continuously on for extended use, suitable for reading or as a flashlight.
Wiederaufladbarer Akku: Equipped with a built-in 1800mAh rechargeable battery, easily charged via USB-C. Eliminates the need for frequent battery replacement.
Einfache Installation: Integrated strong magnets allow direct attachment to iron surfaces. For non-metallic surfaces, use the included adhesive metal plates or screws.

Comparison image showing the MCGOR light (left) with 40 LEDs, 3000K, 180lm, 1800mAh, and adjustable brightness, next to a generic light (right) with 20 LEDs, 5000K, 100lm, 1000mAh, and no dimmable feature.

Image 3.1: Feature Comparison

4. Einrichtung und Installation

The MCGOR under cabinet lights offer two primary installation methods:

4.1 Magnetic Attachment (for Metal Surfaces)

Ensure the metal surface is clean and dry.
Simply place the light directly onto the ironwork surface. The built-in magnets will secure it in place.

4.2 Adhesive Metal Plates (for Non-Metallic Surfaces)

Clean and dry the desired installation surface thoroughly.
Peel the protective film from one side of an adhesive iron plate.
Stick the adhesive iron plate firmly onto the chosen surface. Apply pressure for 30 seconds to ensure strong adhesion.
Allow 24 hours for the adhesive to fully cure before attaching the light.
Once the plate is secure, the light can be magnetically attached to the plate.

4.3 Screw Installation (Optional)

For a more permanent installation or on surfaces where adhesive may not hold well (e.g., rough wood, humid environments), use the provided screws to attach the metal plates. The lights can then be magnetically attached to these screwed-in plates.

Diagram illustrating two installation methods: direct magnetic attachment to metal surfaces and using adhesive metal plates for non-metallic surfaces.

Image 4.1: Two Installation Methods

5. Bedienungsanleitung

The light features a slide switch and a brightness adjustment button.

Close-up of the light's controls, showing the warm-white light, adjust brightness button, PIR sensor/charging indicator, USB-C charging port, and the ON/OFF/AUTO slide switch.

Image 5.1: Light Controls Overview

5.1 Modusauswahl

Use the slide switch to select one of three modes:

AUF: Das Licht bleibt dauerhaft eingeschaltet.
AUS: Das Licht wird ausgeschaltet.
WAGEN: Activates motion sensor mode. The light will turn on automatically when motion is detected in a dark or low-light environment and turn off after approximately 20 seconds of no motion.

Two panels illustrating the modes: 'MOTION SENSOR MODE' showing a light in a closet turning on with a person icon, and 'ALWAYS ON MODE' showing a light on a desk.

Image 5.2: Motion Sensor and Always-On Modes

5.2 Helligkeitseinstellung

In either ON or AUTO mode, press and hold the brightness adjustment button (located next to the PIR sensor) to cycle through 5 levels of brightness. Release the button when the desired brightness is reached.

A kitchen counter scene demonstrating five different levels of light brightness, from dim to bright, illustrating the 5 levels brightness feature.

Image 5.3: 5 Levels of Brightness

6. Aufladen

The MCGOR under cabinet light is equipped with a rechargeable 1800mAh battery.

Ladeanschluss: Suchen Sie den USB-C-Ladeanschluss an der Seite der Leuchte.
Verbindung: Connect the provided USB-C charging cord to the light and plug the other end into a standard USB power adapter (not included) or a computer USB port.
Ladeanzeige: The PIR sensor/charging indicator light will illuminate red during charging and turn green when fully charged.
Akkulaufzeit: A full charge can last approximately 7-45 days in Motion Sensor Mode (depending on usage frequency) or 8 hours in Always-On Mode at 100% brightness.

Close-up image of the light being charged via a USB-C cable, with text indicating 'Upgraded 1800mAh Rechargeable Battery' and battery life estimates for motion sensor and always-on modes.

Image 6.1: USB-C Charging

7. Wartung

To ensure optimal performance and longevity of your MCGOR under cabinet light:

Reinigung: Wipe the light gently with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Wassereinwirkung: Dieses Produkt ist nicht wasserbeständig. Vermeiden Sie den Kontakt mit Wasser und hoher Luftfeuchtigkeit.
Batteriepflege: Laden Sie den Akku regelmäßig auf, auch wenn Sie ihn nicht häufig benutzen, um seine Lebensdauer zu erhalten. Vermeiden Sie es, den Akku über längere Zeiträume vollständig zu entladen.

8. Fehlerbehebung

Problem	Mögliche Ursache	Lösung
Licht geht nicht an.	Batterie ist leer. Schalter ist in Position OFF. Unzureichende Dunkelheit (im AUTO-Modus).	Laden Sie das Licht auf. Slide switch to ON or AUTO. Ensure ambient light is low enough for AUTO mode to activate.
Bewegungssensor funktioniert nicht.	Switch is not in AUTO mode. Area is too bright. Die Bewegung befindet sich außerhalb des Erfassungsbereichs/-winkels.	Slide switch to AUTO. Ensure installation area is dark or dimly lit. Adjust light position to cover desired motion area (120°, 10ft).
Das Licht ist schwach oder flackert.	Schwache Batterie. Die Helligkeitseinstellung ist niedrig.	Laden Sie das Licht auf. Press and hold the brightness adjustment button to increase brightness.
Licht bricht sich an der Oberfläche.	Adhesive plate not cured. Surface not clean/smooth. Excessive weight/vibration.	Allow 24 hours for adhesive to cure. Clean surface thoroughly before applying adhesive. Consider screw installation for more secure mounting.

9. Spezifikationen

Marke	MCGOR
Modellname	GLS-C010
Maße	10 Zoll L x 1.4 Zoll B x 0.57 Zoll H
Farbe	Warmweißes Licht
Material	Aluminium, Kunststoff
Lichtquellentyp	LED (40 LEDs)
Helligkeit	180 Lumen
Farbtemperatur	3000 Kelvin
Stromquelle	Batteriebetrieben
Batterie	1800 mAh Lithium-Polymer-Akku (im Lieferumfang enthalten)
Bandtage	5 Volt (DC)
Wastage	1.5 Watt
Besonderheit	Dimmbar, Bewegungssensor
Verwendung im Innen- und Außenbereich	Innenbereich
Wasserbeständigkeit	Nicht wasserfest

10. Sicherheitshinweise

Das Produkt darf nicht zerlegt oder verändert werden.
Von Wasser und Umgebungen mit hoher Luftfeuchtigkeit fernhalten.
Vor direkter Sonneneinstrahlung und hohen Temperaturen schützen.
Außerhalb der Reichweite von Kindern aufbewahren.
Verwenden Sie zum Aufladen ausschließlich das mitgelieferte USB-C-Kabel.
Vermeiden Sie es, über längere Zeiträume direkt in die LED-Lichtquelle zu schauen.

11. Garantie und Support

For warranty information or technical support, please refer to the product packaging or contact MCGOR customer service directly. Contact details are typically available on the manufacturer's official webWebsite oder über Ihre Einkaufsplattform.

MCGOR GLS-C010