1. Wichtige Sicherheitshinweise
Please read all instructions carefully before using your new Faber Hob. Retain this manual for future reference. Improper installation, adjustment, alteration, service, or maintenance can cause injury or property damage. Refer to this manual. For assistance or additional information, consult a qualified installer, service agency, or the gas supplier.
- Ensure proper ventilation when operating the hob.
- Lagern Sie keine brennbaren Materialien in der Nähe des Geräts.
- Halten Sie Kinder während des Betriebs vom Kochfeld fern.
- Verwenden Sie stets geeignetes Kochgeschirr für die jeweilige Herdplattengröße.
- In case of a gas leak, immediately turn off the gas supply, open windows, and do not operate any electrical switches. Contact your gas supplier or a qualified technician.

Bild: Flame Failure Device (FFD) for superior safety. This device automatically cuts off gas supply if the flame extinguishes.
2. Produktüberschreitungview
The Faber Hob Magiclift HT904 BR CI AI is a 90 cm, 4-burner gas hob designed for modern kitchens. It features a toughened black glass surface, automatic ignition, and liftable brass burners for easy cleaning and enhanced safety.

Bild: Faber Hob Magiclift HT904 BR CI AI, 90 cm, 4 Burner.
3. Einrichtung und Installation
This hob is designed for drop-in installation. Professional installation by a qualified technician is highly recommended to ensure safety and proper functioning. Refer to the included installation template for precise cutout dimensions.
3.1 Enthaltene Komponenten
- 1 Built-In Gas Stove
- 1 Garantiekarte
- 1 Benutzerhandbuch (dieses Dokument)
3.2 Abmessungen
- Artikelabmessungen (T x B x H): 52.5 cm (T) x 90 cm (B) x 17 cm (H)

Bild: Hob dimensions for installation. Width: 900 mm, Depth: 525 mm.
4. Bedienungsanleitung
Your Faber hob features automatic ignition and liftable burners for efficient and convenient cooking.
4.1 Anzünden eines Brenners
- Vergewissern Sie sich, dass die Gaszufuhr zum Kochfeld geöffnet ist.
- Push down and turn the corresponding control knob counter-clockwise to the maximum flame position.
- The automatic ignition system will spark, lighting the burner. Hold the knob for a few seconds after ignition to allow the Flame Failure Device (FFD) to activate.
- Once lit, adjust the flame size by turning the knob between the maximum and minimum flame settings.
- Zum Ausschalten den Knopf im Uhrzeigersinn in die Position „AUS“ drehen.
4.2 Burner Functionality
The hob is equipped with 4 burners: two 3.0 kW burners and two 2.5 kW burners. Some burners offer dual functionality:

Bild: Dual functionality in a single brass burner, offering both 2.5 kW and 3 kW power options.
4.3 Liftable Burners
The unique liftable burner design enhances convenience and safety. You can lift the burners for easier access to the hob surface for cleaning.

Bild: Lift & Lock burners for enhanced convenience and safety.
5. Wartung und Reinigung
Regelmäßige Reinigung und Wartung gewährleisten die Langlebigkeit und optimale Leistung Ihres Kochfelds.
5.1 Reinigung der Glasoberfläche
- Lassen Sie das Kochfeld vor der Reinigung vollständig abkühlen.
- Use a soft cloth or sponge with mild detergent and warm water.
- For stubborn stains, use a non-abrasive hob cleaner specifically designed for glass surfaces.
- Wipe dry with a clean, soft cloth to prevent streaks.
5.2 Cleaning Burners and Pan Supports
- Lift the burners and remove the cast iron pan supports.
- Wash pan supports and burner components with warm soapy water. For heavy grease, a degreaser can be used.
- Ensure all components are completely dry before reassembling. Blocked burner holes can affect flame quality.
- The liftable design makes cleaning underneath the burners easier.

Bild: Liftable burners allow for easy cleaning of the hob surface.
6. Fehlerbehebung
Sollten Sie Probleme mit Ihrem Kochfeld haben, beachten Sie bitte die folgenden häufigen Probleme und Lösungen:
- Brenner zündet nicht:
- Prüfen Sie, ob die Gaszufuhr geöffnet ist.
- Ensure the control knob is pushed down and turned correctly.
- Verify the ignition battery is not depleted (for battery-operated auto ignition).
- Clean the burner cap and ignition pin for any food debris.
- Flame is weak or uneven:
- Check if the burner holes are clogged. Clean them carefully.
- Stellen Sie sicher, dass die Brennerkappe richtig sitzt.
- Verify adequate gas pressure.
- Die Flamme erlischt nach dem Loslassen.asing the knob (FFD activation):
- Hold the knob down for a few extra seconds after ignition to allow the FFD sensor to heat up.
- Ensure the FFD sensor is clean and not obstructed.
If the problem persists after attempting these solutions, contact Faber customer support or a qualified service technician.
7. Spezifikationen
| Besonderheit | Detail |
|---|---|
| Marke | Faber |
| Modellnummer | 106.0706.809 |
| Heizelemente | 4 |
| Farbe | Schwarz |
| Stromquelle | Gasbetrieben |
| Kraftstoffart | Gas |
| Besondere Merkmale | Automatic Ignition, Flame Failure Device (FFD) |
| Brennertyp | Liftable Brass Burners (2 x 3.0 kW, 2 x 2.5 kW) |
| Zündsystemtyp | Batteriebetrieben |
| Steuerungstyp | Knopf |
| Installationstyp | Drop-In |
| Wastage | 3000 Watts (Max per burner) |
| Artikelabmessungen (T x B x H) | 52.5 cm (T) x 90 cm (B) x 17 cm (H) |
| Artikelgewicht | 18320 Gramm |
| Größe | 90 cm |
| Heater Surface Material Type | Glaskeramik |
| Materialtyp | Glass (8mm Toughened Matt finish Black Glass) |
| Im Lieferumfang enthaltene Komponenten | 1 Built-In Gas Stove, 1 Warranty Card, 1 User Manual |
| Ursprungsland | Indien |
8. Garantieinformationen
Your Faber Hob Magiclift HT904 BR CI AI comes with the following warranty:
- Umfassende Garantie: 2 Jahre
- Warranty on Glass: 5 Jahre
- Warranty on Burners & Valves: 5 Jahre
Bitte bewahren Sie Ihren Kaufbeleg und die Garantiekarte für eventuelle Garantieansprüche auf. Die Garantie deckt Herstellungsfehler bei normalem Gebrauch ab. Die detaillierten Garantiebedingungen finden Sie auf der Ihrem Produkt beiliegenden Garantiekarte.
9. Kundendienst
For any queries, service requests, or technical assistance, please contact Faber customer support:
- Kundendienstnummer: 1800-209-3484
- Herstelleradresse: 1086/1/2, SANASWADI, TAL - SHIRUR, PUNE - 412208, MAHARASHTRA, INDIA
You can also visit the official Faber webWeitere Informationen und Supportressourcen finden Sie auf der Website.