Faber Hob Magiclift HT753 BR CI AI 75 cm 3 Burner Instruction Manual

1. Einleitung

This manual provides essential information for the safe and efficient use of your new Faber Hob Magiclift HT753 BR CI AI 75 cm 3 Burner. Please read these instructions carefully before installation, operation, or maintenance. Keep this manual for future reference.

Figure 1: Faber Hob Magiclift HT753 BR CI AI 75 cm 3 Burner, showcasing its sleek black glass surface and three brass burners.

2. Sicherheitshinweise

WARNUNG: Unsachgemäße Installation, Einstellung, Änderung, Service oder Wartung kann zu Sachschäden, Verletzungen oder Tod führen. Lesen Sie die Installations-, Betriebs- und Wartungsanweisungen sorgfältig durch, bevor Sie dieses Gerät installieren oder warten.

• Sorgen Sie für ausreichende Belüftung im Küchenbereich.
• Brennbare Materialien dürfen nicht in der Nähe des Kochfelds gelagert werden.
• Always use appropriate cookware for gas cooking.
• Halten Sie Kinder während des Betriebs vom Gerät fern.
• In case of a gas leak, immediately turn off the gas supply, open windows, and do not operate any electrical switches or appliances. Contact a qualified technician.
• This appliance is equipped with a Flame Failure Device (FFD) which automatically cuts off the gas supply if the flame extinguishes.

3. Produktüberschreitungview

The Faber Hob Magiclift HT753 BR CI AI features a toughened 8mm matt finish black glass surface, three high-efficiency brass burners, and premium control knobs. Its unique liftable burner design enhances convenience for cleaning.

Hauptmerkmale:

• Liftable Burners: Für einfache Reinigung und Pflege.
• Auto Ignition: In-built battery-operated ignition for quick start-up.
• Flammenausfallschutz (FFD): Enhances safety by cutting off gas supply if the flame goes out.
• Cast Iron Pan Support: Durable and stable support for cookware.
• Premium Knobs: Ergonomic design for precise flame control.
• Toughened Black Glass: 8mm thick, matt finish for durability and aesthetics.

Komponenten:

1. Toughened Glass Surface
2. Brass Burners (2 x 3.0 kW, 1 x 2.5 kW)
3. Topfträger aus Gusseisen
4. Steuerknöpfe
5. Ignition System (underneath knobs)
6. Flame Failure Devices (integrated into burners)

Figure 2: Illustration of the liftable burner mechanism, showing how the burner can be raised for access to the hob surface.

Figure 3: Close-up of a brass burner demonstrating its dual flame functionality, offering both a lower single flame (2.5 kW) and a full burner (3.0 kW) for cooking flexibility.

Abbildung 4: Ausführlich view of the Flame Failure Device (FFD) integrated into the burner, a safety feature that automatically cuts off gas supply.

Figure 5: Layout of the three brass burners, indicating the power distribution: two 3.0 kW burners and one 2.5 kW burner.

4. Einrichtung und Installation

The Faber Hob Magiclift HT753 BR CI AI is designed for drop-in installation. Professional installation by a qualified technician is highly recommended to ensure safety and proper functioning.

Installationsschritte:

1. Bereiten Sie die Arbeitsfläche vor: Ensure the countertop cutout dimensions match the hob's requirements. The hob dimensions are 38D x 75W x 13.5H Centimeters.
2. Gasanschluss: Connect the hob to a suitable gas supply line using approved fittings and flexible hoses. Ensure all connections are leak-free.
3. Electrical Connection (for Ignition): Install the battery for the auto-ignition system as per the instructions provided in the packaging.
4. Position the Hob: Carefully lower the hob into the countertop cutout, ensuring it sits flush and is securely supported.
5. Testbetrieb: After installation, test all burners for proper ignition and flame stability. Check for any gas leaks.

Enthaltene Komponenten: 1 Built-In Gas Stove, 1 Warranty Card, 1 User Manual.

5. Bedienungsanleitung

Einen Brenner zünden:

1. Platzieren Sie Ihr Kochgeschirr mittig auf dem gusseisernen Topfträger über der gewünschten Kochstelle.
2. Push down and turn the corresponding control knob counter-clockwise to the maximum flame position.
3. The auto-ignition system will click, and the burner will ignite. Hold the knob down for a few seconds to allow the Flame Failure Device (FFD) to activate.
4. Once the flame is stable, release the knob. If the flame extinguishes, repeat the process.
5. Adjust the flame intensity by rotating the knob between the maximum and minimum flame settings.

Using Dual Functionality Burners:

The brass burners offer dual flame functionality. When igniting, the full burner ignites with 3.0 kW power. For a lower, more flexible flame (2.5 kW), adjust the knob to the appropriate setting as indicated by the knob markings.

Figure 6: Demonstrates the 'Lift & Lock' feature, allowing burners to be securely raised for convenient access during cooking or cleaning.

6. Wartung & Reinigung

Regelmäßige Reinigung und Wartung gewährleisten die Langlebigkeit und optimale Leistung Ihres Kochfelds.

Allgemeine Reinigung:

• Vor der Reinigung muss unbedingt sichergestellt sein, dass das Kochfeld abgekühlt und die Gaszufuhr abgestellt ist.
• Glasoberfläche: Use a soft cloth and a mild, non-abrasive cleaner specifically designed for glass surfaces. Avoid harsh chemicals or abrasive pads that can scratch the glass.
• Topfträger aus Gusseisen: These can be removed and washed with warm soapy water. Dry thoroughly before placing them back on the hob.
• Brenner: The liftable burners allow for easy access. Remove the burner caps and crowns. Clean them with warm soapy water and a soft brush. Ensure all burner parts are completely dry before reassembling. Clogged burner holes can affect flame quality.

Figure 7: The liftable burners simplify the cleaning process, allowing easy access to the hob's black glass surface.

7. Fehlerbehebung

Sollten Probleme auftreten, konsultieren Sie bitte die folgenden häufigen Probleme und Lösungen. Besteht das Problem weiterhin, wenden Sie sich bitte an den Kundendienst.

8. Spezifikationen

9. Garantie und Support

Garantieinformationen:

• Umfassende Garantie: 2 Jahre
• Erweiterte Garantie: 5 Years on Glass, Burners & Valves

Bitte bewahren Sie Ihren Kaufbeleg und Ihre Garantiekarte für eventuelle Garantieansprüche auf.

Kundendienst:

For service, technical assistance, or warranty inquiries, please contact Faber customer support:

Gebührenfreie Nummer: 1800-209-3484

Hersteller: Franke Faber India Pvt Ltd

Address: 1086/1/2, SANASWADI, TAL - SHIRUR, PUNE - 412208, MAHARASHTRA, INDIA