Phanteks XT View Bedienungsanleitung für Midi-Tower-Gaming-Gehäuse

1. Einleitung

The Phanteks XT View is a mid-tower gaming chassis designed to accommodate modern hardware with enhanced cooling capabilities and internal space. It features tempered glass on both the front and side panels, allowing for a clear view of internal components. The chassis supports the latest mainboards with hidden rear connectors for a clean build aesthetic.

Image 1.1: Phanteks XT View Chassis with internal components and D-RGB lighting.

Hauptmerkmale:

• Support for rear-side connector mainboards.
• Front and side tempered glass panels.
• Includes three M25-120mm D-RGB fans.
• Supports up to nine 120mm fan positions.
• Dedicated 360mm radiator support in the top panel.
• Accommodates large graphics cards.

2. Packungsinhalt

Überprüfen Sie, ob alle Komponenten im Paket vorhanden sind:

• XT View Chassis (Black)
• Storage Bracket (1x)
• M25-120_DBK Fan (3x)
• D-RGB Controller (1x)
• Triple SSD Bracket (1x)
• Side D-RGB LED strip (1x)
• Accessory Box containing:
  • Kabelbinder (30x)
  • MB/SSD Screws (30x)
  • Flügelschrauben (4x)
  • HDD Screws (8x)
  • Standoff Tool (1x)
  • MB Standoff (1x)
  • PSU Screws (4x)
  • 30mm Fan Screws (12x, UNC6-32)

3. Einrichtung und Installation

Follow these steps for proper assembly and installation of your PC components within the Phanteks XT View Chassis.

3.1. Vorbereitung des Chassis

1. Auspacken: Carefully remove the chassis from its packaging.
2. Bedienfelder entfernen: Unscrew and remove the tempered glass side panels and any other removable panels to access the interior.

Abbildung 3.1: Innenraum view of the XT View chassis, ready for component installation.

3.2. Motherboard-Installation

1. Abstandshalter installieren: Ensure the correct standoffs are installed for your motherboard form factor (ATX, micro-ATX, mini-ITX, E-ATX). Use the included standoff tool if necessary.
2. Platzieren Sie das Motherboard: Richten Sie Ihr Motherboard sorgfältig an den Abstandshaltern und der Öffnung der I/O-Blende aus.
3. Motherboard sichern: Use the provided MB screws to secure the motherboard to the chassis.

3.3. Installation des Netzteils (PSU)

1. Position PSU: Schieben Sie das Netzteil in das dafür vorgesehene Fach an der unteren Rückseite des Gehäuses.
2. Sicheres Netzteil: Fasten the PSU to the chassis using the provided PSU screws.

3.4. Installation des Speicherlaufwerks

The chassis supports 3.5" HDDs and 2.5" SSDs.

• 3.5"-Festplatte: Install into the storage bracket. The chassis supports 2x 3.5" drives (or 1x if 2x SSDs are installed in the same bracket).
• 2.5"-SSD: Install into the storage bracket or the triple SSD bracket. The chassis supports 2x 2.5" drives (or 0x if 2x HDDs are installed in the same bracket).

Sichern Sie die Laufwerke mit den passenden Schrauben.

3.5. Expansion Card (GPU) Installation

1. Steckplatzabdeckungen entfernen: Remove the necessary expansion slot covers from the rear of the chassis.
2. Karte einführen: Carefully insert your graphics card or other expansion cards into the PCIe slots on the motherboard.
3. Sichere Karte: Fasten the expansion card with screws. Vertical GPU support is available with an optional bracket (PH-VGPUKT4.0_03R/PH-PGPUKT_01).

Abbildung 3.2: Innenraum hinten view highlighting expansion slots and fan mounting points.

3.6. Lüfter- und Kühlerinstallation

The chassis supports various fan and radiator configurations:

• 120mm Fan Locations: Right Side (2x), Top (3x), Rear (1x), Midplate (3x).
• 140mm Fan Locations: Top (2x), Rear (1x).
• Liquid Cooling Radiator Support:
  • Side: Up to 240mm (with Vertical GPU only).
  • Oben: Bis zu 360 mm.
  • Rear: Up to 120mm.

Install the included M25-120 D-RGB fans in your preferred locations. Ensure proper airflow direction for optimal cooling.

3.7. Kabelmanagement

Utilize the cable routing channels and tie-down points behind the motherboard tray to organize cables. This improves airflow and aesthetics.

Bild 3.3: Hinten view illustrating cable management space.

3.8. Front-E/A-Anschlüsse

Connect the front I/O cables from the chassis to the corresponding headers on your motherboard:

• USB 3.0-Header
• USB-C 3.2 Gen2 Type-E header
• HD-Audio header
• Power switch, Reset button, D-RGB color button, D-RGB mode button headers
• D-RGB expansion header (for additional D-RGB devices)

4. Bedienungsanleitung

4.1. Ein-/Ausschalten

Drücken Sie die Netzschalter located on the top front panel to turn the system on or off.

4.2. Anschlüsse an der Vorderseite

Das vordere I/O-Panel bietet bequemen Zugriff auf:

• 1x USB 3.0-Anschluss
• 1x USB-C 3.2 Gen2 port
• Microphone/Headphone Combo jack

Image 4.1: Front I/O panel on the top of the chassis.

4.3. D-RGB Control

The integrated D-RGB controller allows for customization of the included D-RGB fans and LED strip. Use the D-RGB color button to cycle through colors and the D-RGB mode button to change lighting effects. The D-RGB system can also be synchronized with compatible motherboards via the D-RGB Motherboard connector.

5. Wartung

5.1. Reinigung der Staubfilter

Regularly clean the dust filters to maintain optimal airflow and cooling performance. Dust filters are typically located at the front, top, and bottom of the chassis.

1. Filter entfernen: Gently slide out or unclip the dust filters.
2. Sauber: Use compressed air or a soft brush to remove accumulated dust. For heavily soiled filters, wash with water and allow to dry completely before reinstallation.
3. Neu installieren: Place the clean, dry filters back into their positions.

5.2. Allgemeine Reinigung

Für Außenflächen ein weiches, damp cloth to wipe down the chassis. Avoid abrasive cleaners or solvents that may damage the finish or tempered glass.

6. Fehlerbehebung

In diesem Abschnitt werden häufig auftretende Probleme behandelt.

6.1. Das System lässt sich nicht einschalten.

• Stromanschlüsse: Verify that the PSU is properly connected to the wall outlet and the power switch on the PSU is in the 'ON' position.
• Anschlüsse auf dem Motherboard: Ensure all power cables from the PSU are securely connected to the motherboard (24-pin ATX, 8-pin CPU).
• Kopfzeile der Frontplatte: Prüfen Sie, ob das Kabel des Netzschalters von der Front-I/O-Schnittstelle korrekt mit dem Frontpanel-Anschluss des Motherboards verbunden ist.

6.2. D-RGB Lighting Not Functioning

• D-RGB Controller Connection: Ensure the D-RGB controller is properly connected to the PSU and the D-RGB devices (fans, LED strip).
• Motherboard-Synchronisierung: If using motherboard D-RGB control, verify the D-RGB Motherboard cable is correctly connected and the motherboard's software is configured.
• Tastenfunktion: Test the D-RGB color and mode buttons on the front panel.

6.3. Fan Noise or Malfunction

• Verbindungen: Ensure fan cables are securely connected to the motherboard fan headers or a fan controller.
• Hindernisse: Check for any cables or objects obstructing fan blades.
• Staub: Entfernen Sie jeglichen Staub von den Lüfterflügeln.

7. Spezifikationen

8. Support und Garantie

For additional information, technical support, or warranty inquiries, please visit the official Phanteks webWebsite:

www.phanteks.com

Refer to the Phanteks webAuf dieser Website finden Sie die aktuellsten Garantiebedingungen für Ihre Region.