Pipishell PILF8, PIMF2
Pipishell Full Motion TV Wall Mount Bracket User Manual
Models: PILF8 (for 37-75 inch TVs) & PIMF2 (for 26-55 inch TVs)
Einführung
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Pipishell Full Motion TV Wall Mount Brackets. These mounts are designed to securely hold your flat or curved screen television, offering flexible viewing angles. Please read this manual thoroughly before installation and keep it for future reference.
Bild: Überview of Pipishell Full Motion TV Wall Mounts, including models for both smaller and larger televisions.
Sicherheitshinweise
WARNUNG: Werden die Anweisungen nicht gelesen und befolgt, kann dies zu Verletzungen, Sachschäden oder zum Verlust der Garantie führen. Sollten Sie die Anweisungen nicht verstehen oder Zweifel an der Sicherheit der Installation haben, wenden Sie sich bitte an einen qualifizierten Installateur.
- Do not install on drywall alone. Ensure the mount is secured to a solid wood stud, concrete, or brick wall.
- Verify your TV's VESA pattern, weight, and size are within the mount's specifications.
- Use only the provided hardware. Do not use damaged or missing parts.
- Always have at least two people for installation, especially when lifting the TV.
- Ensure all screws are tightened securely but do not overtighten.
Ersatzteilliste
Before installation, ensure all parts are present and undamaged. Refer to your specific model's packaging for a complete list of included hardware.
Image: Included components for the PILF8 model, showing the main mount assembly, TV attachment rails, cable management ties, and a bubble level.
Image: Included components for the PIMF2 model, showing the main mount assembly and TV attachment rails.
Schlüsselkomponenten:
- Wall Plate Assembly (with articulating arms)
- TV Bracket Rails
- Various Screws, Washers, and Spacers for TV and Wall Attachment
- Concrete Anchors (for concrete/brick wall installation)
- Kabelbinder
- Wasserwaage
- Anti-Drop End Caps (PILF8)
- Security Screws (PILF8)
Technische Daten
| Besonderheit | PILF8 (37-75 Inch) | PIMF2 (26-55 Inch) |
|---|---|---|
| Montagetyp | Wandhalterung | |
| Bewegungstyp | Gelenkig, schwenkbar, neigbar | |
| Material | Legierter Stahl | |
| Compatible TV Size Range | 37" - 75" | 26" - 55" |
| Maximale Gewichtskapazität | 100 kg | 66 kg |
| VESA-Kompatibilität | 200 x 100 mm bis 600 x 400 mm | 75 x 75 mm bis 400 x 400 mm |
| Neigungswinkel | +5° / -15° | +5° / -15° |
| Schwenkwinkel | +/-45° | +/-90° (max depends on TV size) |
| Verlängerung von der Wand | Retract to 3.2", Extend up to 15.4" | Retract to 2.2", Extend up to 17" |
| Nivellierung nach der Installation | +/-3° | N/A (implied by swivel/tilt) |
| Wandkompatibilität | 16" Max wood studs, concrete, brick | Single wood stud, concrete, brick |
Image: Compatibility check points for your TV and wall type.
Setup und Installation
Erforderliche Werkzeuge (nicht im Lieferumfang enthalten):
- Bleistift
- Kreuzschlitzschraubendreher
- Elektrische Bohrmaschine
- Balkensucher (für Holzständerwände)
- Steckschlüssel oder verstellbarer Schraubenschlüssel
- Hammer (für Betonanker)
Checkliste vor der Installation:
- Prüfen Sie, ob das Gewicht Ihres Fernsehers und das VESA-Muster den Spezifikationen der Halterung entsprechen.
- Ermitteln Sie die Art Ihrer Wand (Holzständerwand, massive Betonwand oder Ziegelwand). Nicht allein an Trockenbauwänden montieren.
- Locate the desired mounting position, ensuring it is at a comfortable viewing height and away from electrical wires or plumbing.
Installationsschritte:
Image: Simplified 3-step installation process.
- Befestigen Sie die TV-Halterungen am Fernseher:
Carefully place your TV face down on a soft, clean surface. Align the TV bracket rails with the VESA mounting holes on the back of your TV. Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV. Secure the brackets to the TV, ensuring they are level and firmly attached.
Bild: Detailliert view of the PIMF2 mount, highlighting the TV bracket attachment points.
- Wandplatte an der Wand befestigen:
Determine the exact mounting location. Use a stud finder to locate wood studs if applicable. For concrete or brick walls, mark drill holes directly. Use the wall plate as a template to mark the drill holes. Drill pilot holes according to the recommended drill bit size for your wall type. Secure the wall plate to the wall using the appropriate lag bolts and washers. For concrete/brick, insert concrete anchors before securing the lag bolts. Ensure the wall plate is level using the included bubble level.
Image: Wall compatibility guide for installation.
- Fernseher an der Wandplatte befestigen:
With assistance, carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure the TV brackets are securely seated on the wall plate's arms. Tighten any security screws or locking mechanisms on the TV brackets to prevent accidental dislodgement. Perform post-installation leveling if necessary (for PILF8 model, +/-3° adjustment is available).
Image: Key safety features like security screws and anti-drop end caps.
Operating the TV Mount
Your Pipishell full motion TV mount allows for various adjustments to achieve the optimal viewErfahrung.
- Schwenken: Gently push or pull the TV to swivel it left or right. The PILF8 offers +/-45° swivel, while the PIMF2 offers up to +/-90° (depending on TV size).
- Neigung: Loosen the tilt adjustment knobs or bolts on the TV brackets, adjust the TV to your desired tilt angle (+5° to -15°), and then re-tighten the knobs/bolts to secure the position.
- Ausfahren/Einfahren: Pull the TV away from the wall to extend the articulating arms, or push it back towards the wall to retract it. The PILF8 extends up to 15.4 inches and retracts to 3.2 inches. The PIMF2 extends up to 17 inches and retracts to 2.2 inches.
Image: Demonstrating the swivel function for comfortable viewwinkeln.
Image: Demonstrating the extension and retraction capabilities of the mount.
Image: Full range of motion for the PIMF2 mount, including extension, tilt, and swivel.
Wartung
Regelmäßige Wartung gewährleistet die Langlebigkeit und den sicheren Betrieb Ihrer TV-Halterung.
- Periodically check all screws and bolts to ensure they remain securely tightened.
- Reinigen Sie die Halterung mit einem weichen, trockenen Tuch. Vermeiden Sie scheuernde Reiniger oder Lösungsmittel.
- If the mount's movement becomes stiff, a small amount of silicone-based lubricant can be applied to the articulating joints (avoiding contact with the TV or wall).
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Der Fernseher steht nach der Installation nicht waagerecht. | Wall plate not level, or TV not adjusted. | For PILF8, use the +/-3° post-installation leveling feature. For PIMF2, re-adjust the TV on the brackets or re-level the wall plate. |
| Die Halterung fühlt sich locker oder wackelig an. | Die Schrauben waren nicht vollständig festgezogen oder es wurden die falschen Dübel verwendet. | Ensure all wall plate and TV bracket screws are securely tightened. Verify correct anchors were used for your wall type. If issue persists, consult a professional. |
| Schwierigkeiten beim Schwenken oder Neigen des Fernsehers. | Joints are stiff or overtightened. | Check if any tilt knobs are overtightened. Apply a small amount of silicone lubricant to the articulating joints if necessary. |
| Der Fernseher passt nicht an die Halterung. | Incorrect VESA pattern or TV weight/size. | Verify your TV's VESA pattern and weight against the mount's specifications. If incompatible, the mount cannot be used. |
Garantie und Support
For warranty information or technical support, please contact Pipishell customer service through their official website or the retailer where the product was purchased. Please have your product model (PILF8 or PIMF2) and purchase details ready when contacting support.
You can visit the Pipishell Store for more information: Pipishell Store on Amazon