FLEXISPOT E6 MAX

FLEXISPOT E6 MAX Dual Motor 3 Stages Standing Desk User Manual

Model: E6 MAX | Brand: FLEXISPOT

Einführung

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your FLEXISPOT E6 MAX Dual Motor 3 Stages Standing Desk. Please read this manual thoroughly before assembly and use to ensure proper function and safety.

Sicherheitshinweise

WARNUNG:

Exceeding the maximum weight recommendation of 352 pounds may cause damage or pose a safety risk. Ensure the desk is not overloaded. Keep children and pets away from the desk during height adjustments to prevent injury due to the anti-collision function.

Packungsinhalt

Vor Beginn der Montage prüfen Sie bitte, ob alle Teile vorhanden und unbeschädigt sind. Die Verpackung enthält üblicherweise Folgendes:

  • Whole-piece Desktop (55"x28" Special Walnut)
  • Desk Frame (Black) with Dual Motors
  • 3-Stage Lifting Columns (2)
  • Feet/Bases (2)
  • Control Panel with LCD screen and backlit buttons
  • Netzteil und Kabel
  • Montagezubehör (Schrauben, Inbusschlüssel)
  • Complimentary Accessories: Velcro Straps, Set of Wheels, Cable Manager
All components of the FlexiSpot E6 MAX standing desk laid out for assembly.

Image: All components of the FlexiSpot E6 MAX standing desk laid out for assembly, including the desktop, frame parts, and accessories.

Installationsanweisungen

Assembly is straightforward and can typically be completed by one person in approximately 30 minutes. A power drill is recommended for some steps, though a hand screwdriver can also be used.

  1. Komponenten auspacken: Carefully remove all parts from the two shipping boxes. One box contains the desktop, and the other contains the frame and accessories.
  2. Assemble Support Beams: Connect the three pieces of each support beam by sliding the outer sections together and tightening them securely.
  3. Anbringen von Hubsäulen: Securely attach the lifting columns to the assembled support beams using the provided Allen wrench and screws. Each side requires four screws.
  4. Install Feet/Bases: Screw the feet onto the bottom of the lifting columns using the Allen wrench. Optionally, swap the feet for the included wheels for easier mobility.
  5. Position Desktop: Place the desktop upside down on a clean, soft surface. Carefully align the assembled desk frame onto the pre-drilled holes on the underside of the desktop.
  6. Install Control Box and Keypad: Mount the control box and keypad to the designated areas on the underside of the desktop using screws.
  7. Verkabelung anschließen: Connect all necessary wires from the motors, control panel, and power adapter to the control box. Ensure all connections are secure.
  8. Kabelmanagement: Use the included Velcro straps and cable manager to organize and secure all cables neatly under the desk.
Nahaufnahme der Dreiergruppetage leg mechanism of the FlexiSpot E6 MAX standing desk.

Image: The three-stage leg mechanism allows for continuous height adjustment, accommodating various user heights.

Complimentary accessories for the FlexiSpot E6 MAX standing desk, including Velcro straps, a set of wheels, and a cable manager.

Image: Included accessories like Velcro straps, wheels, and a cable manager assist in organizing your workspace.

Bedienungsanleitung

Your FLEXISPOT E6 MAX desk features intuitive controls for seamless height adjustment.

Höhenverstellung

  • The desk adjusts from a minimum height of 24.4 inches to a maximum height of 50 inches.
  • Verwenden Sie die Nach oben (▲) Und Runter (▼) Die Höhe des Schreibtisches kann manuell über Pfeiltasten auf dem Bedienfeld eingestellt werden.

Programmierbare Speichereinstellungen

The control panel features four programmable memory buttons (1, 2, 3, 4) to save your preferred sitting and standing heights.

  1. Stellen Sie den Schreibtisch mithilfe der Auf-/Ab-Tasten auf die gewünschte Höhe ein.
  2. Drücken Sie die M Drücken Sie diese Taste. Im Display erscheint „S-“.
  3. Immediately press one of the numbered memory buttons (1, 2, 3, or 4) to save the current height. The display will confirm the setting.
  4. Um eine gespeicherte Höhe abzurufen, drücken Sie einfach die entsprechende nummerierte Speichertaste. Der Schreibtisch fährt automatisch in diese Position.

Antikollisionsfunktion

The desk is equipped with a sensitivity mode that detects obstacles during height adjustment. If the desk encounters an object, it will automatically stop and reverse slightly to prevent damage or injury.

Close-up of the programmable control panel of the FlexiSpot E6 MAX standing desk with blue backlighting.

Image: The intuitive control panel features an LCD screen, up/down arrows, and four memory settings for quick adjustments.

Wartung

Regelmäßige Wartung gewährleistet die Langlebigkeit und optimale Leistung Ihres Stehtisches.

  • Reinigung: Wischen Sie die Tischplatte und den Rahmen mit einem weichen, fusselfreien Tuch ab.amp Verwenden Sie kein scheuerndes Reinigungsmittel oder aggressive Chemikalien, die die Oberfläche beschädigen könnten.
  • Kabelmanagement: Periodically check and re-secure cables using the provided Velcro straps or cable manager to prevent tangles and damage.
  • Motorprüfung: Achten Sie während des Betriebs auf ungewöhnliche Geräusche. Sollten Sie Probleme feststellen, konsultieren Sie bitte den Abschnitt zur Fehlerbehebung oder wenden Sie sich an den Kundendienst.
  • Gewichtsverteilung: Ensure weight is evenly distributed on the desktop to prevent strain on the motors and frame.

Fehlerbehebung

If you encounter issues with your FLEXISPOT E6 MAX desk, try the following common troubleshooting steps:

  • Schreibtisch bewegt sich nicht: Überprüfen Sie alle Stromanschlüsse. Stellen Sie sicher, dass das Netzkabel sowohl am Schreibtisch als auch an der Wandsteckdose fest eingesteckt ist.
  • Fehlercode auf dem Display: Refer to the specific error code in the full product manual (not provided here) or contact customer support for guidance.
  • Ungleichmäßige Bewegung: Ensure the desk is on a level surface. Check for any obstructions under the desk that might impede movement.
  • Reset-Funktion: If the desk is unresponsive, unplug it from the power outlet for 10-15 seconds, then plug it back in. This may reset the system.

Technische Daten

BesonderheitSpezifikation
MarkeFLEXISPOT
ModellnummerE6
Technische Daten47.5"D x 27.5"W x 23.6"H (Frame)
Desktopgröße55"x28" Whole-piece
FarbeBlack Frame + Special Walnut Top
GrundmaterialMetall
Top-MaterialtypHolzwerkstoff
HebemechanismusElectric Dual Motor
Anzahl der Stages3 Stages
Höhenbereich24.4" bis 50"
Maximale Gewichtskapazität330 Pfund (150 kg)
GeräuschpegelWeniger als 50 dB
Montage erforderlichJa (Empfohlen für 2 Personen)
The FlexiSpot E6 MAX standing desk supporting heavy weights, illustrating its 330 lbs load capacity.

Image: The desk's robust construction supports up to 330 lbs, providing a sturdy workstation.

Diagram showing the dimensions of the FlexiSpot E6 MAX desktop and desk frame height ranges.

Image: Detailed dimensions of the desktop (55"x28") and the adjustable height ranges for the desk frame.

Garantie

FLEXISPOT offers a comprehensive warranty for your peace of mind:

  • 10-jährige Abdeckung: Applies to the desk frame and motors.
  • 2 Jahre Schutz: Applies to the control panel and electronics.

For any warranty claims or assistance, please contact FLEXISPOT customer support.

Kundenservice

For further assistance, technical support, or inquiries regarding your FLEXISPOT E6 MAX Standing Desk, please contact the manufacturer directly. Refer to the contact information provided with your product packaging or visit the official FLEXISPOT webWebsite.

Besuchen Sie auch die FLEXISPOT Store auf Amazon für weitere Informationen und Supportressourcen.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.