1. Einleitung
The Lumens VS-KB21 is an advanced IP camera controller designed for professional video production environments. It provides comprehensive control over up to 255 IP-connected cameras, supporting various communication interfaces including RS-232, RS-422, and Ethernet. Key features include a 4-axis joystick for precise Pan/Tilt/Zoom control, a 3-inch LCD for RTSP preview, and user-assignable keys for quick access to functions. This manual provides detailed instructions for setting up, operating, and maintaining your VS-KB21 controller.
2. Produktüberschreitungview
Familiarize yourself with the components and controls of the VS-KB21 controller.
2.1 Bedienelemente auf der Vorderseite
Abbildung 1: Vorderseite view of the Lumens VS-KB21 IP Camera Controller, showing the joystick, LCD screen, and various control buttons and knobs.
- Joysticks: 4-axis control for Pan, Tilt, and Zoom.
- LCD Bildschirm: 3-inch display for RTSP video preview und Menüführung.
- Knöpfe: Dedicated controls for Iris, Shutter, Gain, White Balance, and Focus.
- Tastenfeld: Numeric and function keys for camera selection, preset recall, and menu input.
- User-Assignable Keys (F1, F2): Anpassbare Funktionstasten.
- Zoom Seesaw Lever: For precise zoom control (Tele/Wide).
2.2 Anschlüsse auf der Rückseite
Abbildung 2: Rückseite view of the Lumens VS-KB21 IP Camera Controller, highlighting the connectivity ports.
- RS-422-Port: For serial communication with cameras.
- RS-232-Port: For serial communication with cameras.
- Service-Port: USB port for firmware updates and service.
- ETHERNET-Anschluss: RJ-45 connector for IP control and PoE (Power over Ethernet).
- DC-EINGANG 12V: Stromanschluss für den mitgelieferten Gleichstromadapter.
- Stromschalter: Ein-/Ausschalter für das Gerät.
- LOCK Slot: For security cable.
3. Einrichtung
Follow these steps to set up your VS-KB21 controller.
- Stromanschluss:
- Connect the provided DC 12V power adapter to the 'DC IN 12V' port on the rear panel and plug it into a power outlet.
- Alternatively, if using a PoE-enabled network switch, connect an Ethernet cable from the switch to the 'ETHERNET' port. The unit will power on via PoE.
- Network Connection (for IP Control):
- Connect an Ethernet cable from the 'ETHERNET' port on the controller to your network switch or router. Ensure the controller and IP cameras are on the same network segment.
- Serial Connection (for RS-232/RS-422 Control):
- For RS-232 control, connect a serial cable from the 'RS-232' port on the controller to the camera's RS-232 port.
- For RS-422 control, connect a serial cable from the 'RS-422' port on the controller to the camera's RS-422 port.
- Erstes Einschalten:
- Flip the 'POWER' switch to the ON position. The LCD screen will illuminate, and the controller will initialize.
- Kamerakonfiguration:
- Access the controller's settings menu via the LCD to add and configure your IP or serial cameras. Refer to the on-screen prompts for IP address, port, and protocol settings (VISCA, VISCA Over IP).
4. Bedienungsanleitung
This section details the operation of the VS-KB21 controller for managing your cameras.
4.1 Kameraauswahl
- Press the 'CAM LIST' button to view a list of configured cameras.
- Use the numeric keypad (CAM 1-7) or the joystick to select the desired camera.
- Drücken Sie „ENTER“, um Ihre Auswahl zu bestätigen.
4.2 Schwenk-, Neige- und Zoomsteuerung (PTZ)
- Schwenken/Neigen: Move the 4-axis joystick left/right for pan and up/down for tilt.
- Zoom: Rotate the joystick head or use the 'TELE' (zoom in) and 'WIDE' (zoom out) buttons on the seesaw lever.
- PTZ-Geschwindigkeit: Adjust the 'PTZ SPEED' knob to control the responsiveness of the joystick.
4.3 Fokussteuerung
- Press the 'AUTO FOCUS' button for automatic focus adjustment.
- For manual focus, use the 'FOCUS' knob: rotate 'NEAR' to focus on closer objects, 'FAR' for distant objects.
4.4 Exposure and White Balance
- Belichtungsmodus: Press 'EXPOSURE MODE' to cycle through auto, manual, and shutter priority modes.
- Iris/Shutter/Gain: Use the dedicated knobs to adjust these parameters in manual exposure mode.
- Weißabgleich: Press 'WB MODE' to select white balance presets or 'ONE PUSH WB' for automatic one-push white balance.
4.5 Voreinstellungen
- Speichern einer Voreinstellung: Position the camera as desired, then press 'SAVE' followed by a numeric key (0-9) to store the preset.
- Voreinstellung aufrufen: Press 'CALL' followed by the numeric key corresponding to the saved preset.
4.6 RTSP Preview
- The 3-inch LCD screen supports RTSP video preview from the selected IP camera. Ensure the camera's RTSP stream is correctly configured in the controller's settings.
- Press 'PVW' to toggle the preview ein/aus.
5. Wartung
Proper maintenance ensures the longevity and optimal performance of your VS-KB21 controller.
- Reinigung: Use a soft, dry cloth to clean the exterior of the controller. For stubborn marks, a slightly damp Man kann ein Tuch mit mildem Reinigungsmittel verwenden, wobei darauf zu achten ist, dass keine Flüssigkeit in das Gerät gelangt.
- Lagerung: Bewahren Sie den Controller bei Nichtgebrauch an einem kühlen, trockenen Ort fern von direkter Sonneneinstrahlung und extremen Temperaturen auf.
- Firmware-Updates: Periodically check the Lumens official website for firmware updates. Updates can be installed via the 'SERVICE' USB port.
- Vermeiden Sie Flüssigkeiten: Der Controller darf nicht mit Wasser oder anderen Flüssigkeiten in Berührung kommen.
- Auswirkungen vermeiden: Protect the device from physical shocks and drops, especially the joystick.
6. Fehlerbehebung
In diesem Abschnitt finden Sie Lösungen für häufig auftretende Probleme.
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Der Controller lässt sich nicht einschalten. | No power supply; Power switch off; Faulty power adapter/PoE. | Ensure power adapter is connected and outlet is active. Check PoE connection. Verify power switch is ON. |
| Cannot control camera via IP. | Incorrect IP settings; Network issue; Camera not configured; Firewall blocking. | Verify IP address, subnet mask, and gateway settings. Ensure controller and camera are on the same network. Check camera configuration in controller. Disable firewalls temporarily for testing. |
| No RTSP preview auf dem LCD. | Incorrect RTSP stream URL; Network congestion; Camera not streaming. | Confirm the RTSP stream URL in the controller's settings matches the camera's output. Check network bandwidth. Ensure the camera is actively streaming. |
| Joystick control is unresponsive or erratic. | Loose cable connection; Joystick calibration needed; Physical damage. | Check all cable connections. Refer to the controller's menu for joystick calibration options. If issues persist, contact support. |
7. Spezifikationen
Detailed technical specifications for the Lumens VS-KB21 IP Camera Controller.
| Besonderheit | Beschreibung |
|---|---|
| Kommunikationsschnittstelle | RS-232 / RS-422 / IP (Ethernet) |
| Anzeige | 3-Zoll-LCD |
| Joystick | 4-axis (Pan / Tilt / Zoom) |
| Geschwindigkeitsregelung | 1 Knopf |
| Zoom-Steuerung | 1 Seesaw Lever |
| Kontrolle gewinnen | R/B-Verstärkung |
| Fokus-Steuerung | Auto / Manuell |
| Zuweisbare Tasten | 2 (F1, F2) |
| Tastenfeld | Von hinten beleuchtet |
| Stream Preview | RTSP |
| Baudrate | 2400 / 4800 / 9600 / 38400 / 115200 bps |
| Camera Address Range | 1 bis 255 |
| Voreinstellungen | 255 |
| Leistung | DC12V / PoE |
| Abmessungen (BxHxT) | 11.89 x 5.63 x 4.41 Zoll (30.2 x 14.3 x 11.2 cm) |
| Gewicht | 2.8 Pfund (1.27 kg) |
| Farbe | Schwarz |
| Modellname | VS-KB21 |
8. Garantie und Support
For warranty information, technical support, or service inquiries, please visit the official Lumens webBesuchen Sie unsere Website oder wenden Sie sich an Ihren autorisierten Händler. Bewahren Sie Ihren Kaufbeleg als Kaufnachweis für Garantieansprüche auf.
Lumen WebWebsite: www.mylumens.com