WLLKIY ST-9624A

Digital Air Pump User Manual

Modell: ST-9624A

Brand: WLLKIY

Einführung

Thank you for choosing the WLLKIY Digital Air Pump. This intelligent air compressor is designed for efficient and convenient inflation of tires for motorcycles, bicycles, and other inflatables. With its wireless/wired capabilities, digital display, and safety features, it provides a reliable solution for your inflation needs. Please read this manual thoroughly before operation to ensure safe and optimal performance.

Sicherheitshinweise

Um Verletzungen oder Schäden zu vermeiden, beachten Sie bitte stets die folgenden Sicherheitsvorkehrungen:

  • Lassen Sie den Aufblaser während des Betriebs nicht unbeaufsichtigt.
  • Außerhalb der Reichweite von Kindern aufbewahren.
  • Ensure the inflation port is handled with care; the internal sinking design helps reduce the risk of burns, but caution is still advised.
  • Das Gerät darf nicht in feuchter Umgebung oder in der Nähe von brennbaren Flüssigkeiten/Gasen betrieben werden.
  • Prüfen Sie immer den empfohlenen Druck für den Gegenstand, den Sie aufpumpen, um ein Überpumpen zu vermeiden.
  • Disconnect the power source when not in use or before cleaning.

Packungsinhalt

Überprüfen Sie, ob alle Artikel in Ihrem Paket vorhanden sind:

  • Digital Air Pump Unit
  • Aufblasschlauch
  • Car Power Cable (12V)
  • Various Nozzle Adapters (e.g., for bicycles, balls)
  • Aufbewahrungstasche
  • Benutzerhandbuch (dieses Dokument)
Digital Air Pump and accessories laid out

Image: The digital air pump unit, along with its flexible inflation hose, 12V car power cable, various nozzle adapters for different inflatables, and a storage pouch.

Produkt überview

Familiarize yourself with the components of your digital air pump:

  • Digitaler Bildschirm: Shows current pressure, target pressure, and unit (PSI, Bar, Kpa, Kg/cm²).
  • Bedientasten: Power, Mode selection, Increase/Decrease pressure, SOS light.
  • Aufblasöffnung: Connects the inflation hose. Designed with anti-scald features.
  • Schlauch: Flexible hose with a quick-connect chuck for tire valves. Features a multi-layered construction for durability, including rubber tube, reinforced protective layer, aluminum foil protection layer, and high-strength nylon braiding.
  • Leistungsaufnahme: For wired operation (12V car power) or charging the internal battery.
  • LED-Licht: Bietet Beleuchtung für den Einsatz bei Nacht oder in Notfällen.
  • High Precision Sensor Chip: Ensures accurate pressure measurement with zero error.
Close-up of the inflation hose construction

Bild: Eine detaillierte view of the inflation hose, highlighting its robust multi-layer construction for enhanced durability and performance.

Intern view of the high precision sensor chip

Image: An internal schematic view showcasing the high precision sensor chip, which ensures accurate tire pressure measurements.

Aufstellen

Charging the Device (Wireless Operation)

Before first use, fully charge the internal 6000mAh battery. Connect the provided charging cable to the device's power input and a suitable USB power adapter (not included). The display will indicate charging status. A full charge ensures maximum portability and runtime.

Kabelgebundener Betrieb

For continuous power or if the internal battery is low, connect the provided 12V car power cable to the device's power input and then to your vehicle's cigarette lighter socket.

Anschließen des Aufblasschlauchs

Screw the inflation hose securely into the inflation port on the top of the digital air pump.

Bedienungsanleitung

Befolgen Sie diese Schritte, um Ihre Reifen oder andere Gegenstände aufzupumpen:

  1. Einschalten: Press the power button to turn on the device. The digital display will light up, showing the current pressure unit and battery level.
  2. Druckeinheit auswählen: Press the 'Mode' button (often indicated by a unit symbol or 'M') to cycle through available pressure units: PSI, Bar, Kpa, Kg/cm². Select the unit appropriate for your needs.
  3. Zieldruck einstellen: Use the '+' and '-' buttons to adjust the desired target pressure. The display will show the set value. Refer to your vehicle's or item's recommended pressure.
  4. Mit Ventil verbinden: Securely attach the quick-connect chuck of the inflation hose to the tire valve stem. For other inflatables, use the appropriate nozzle adapter. Ensure a tight seal to prevent air leakage.
  5. Inflation starten: Press the power button again to begin inflation. The pump will automatically inflate to the preset pressure and then stop.
  6. Fortschritt überwachen: The digital display will show the real-time pressure as it inflates.
  7. Trennen: Once inflation is complete and the pump has stopped, quickly detach the hose from the valve stem. A small amount of air may escape, which is normal.
  8. Ausschalten: Halten Sie den Netzschalter gedrückt, um das Gerät auszuschalten.

Verwendung des LED-Lichts

Press the light button (often indicated by a sun or light bulb icon) to turn on the LED light. This is useful for inflating in low-light conditions or as an emergency light. Press again to cycle through light modes (e.g., steady, flashing, SOS) or turn off.

Digital air pump inflating a car tire

Image: The digital air pump connected to a car tire, actively displaying the pressure reading during inflation.

Digital air pump resting against car tires

Image: The compact digital air pump positioned next to vehicle tires, demonstrating its portability and readiness for use.

Wartung

  • Reinigung: Wischen Sie die Außenseite der Pumpe mit einem weichen, fusselfreien Tuch ab.amp Mit einem Tuch abwischen. Keine scharfen Chemikalien oder Scheuermittel verwenden. Das Gerät vor der Lagerung vollständig trocknen lassen.
  • Lagerung: Store the air pump and its accessories in the provided storage pouch in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Batteriepflege: If storing for extended periods, charge the battery every 3-6 months to maintain its lifespan.
  • Schlauchinspektion: Überprüfen Sie den Aufblasschlauch regelmäßig auf Anzeichen von Verschleiß, Rissen oder Beschädigungen. Ersetzen Sie ihn gegebenenfalls.

Fehlerbehebung

ProblemMögliche UrsacheLösung
Pumpe lässt sich nicht einschalten.Battery is depleted or not connected to power.Charge the battery or connect to a 12V car power source.
Die Pumpe läuft, aber es kommt keine Luft rein.Hose not securely attached to valve or pump; valve core issue.Ensure hose is tightly screwed onto pump and valve. Check valve core for blockages.
Ungenaue Druckanzeige.Loose connection; sensor calibration needed.Ensure connections are tight. If persistent, contact customer support.
Die Pumpe schaltet sich vorzeitig ab.Zieldruck erreicht; Überhitzung; schwacher Akku.Check target pressure setting. Allow pump to cool down. Recharge battery.

Technische Daten

BesonderheitDetail
MarkeWLLKIY
ModellnameST-9624A
Modellnummer3256805965477585
Produktabmessungen (L x B x H)45 mm x 82 mm x 160 mm (1.77 Zoll x 3.22 Zoll x 6.29 Zoll)
Produktgewicht10 Grams (Note: This weight seems unusually low for a pump. Please verify with product packaging if discrepancy is observed.)
MaterialPlastik
StromquelleWireless (6000mAh internal battery) / Wired (12V DC)
Maximaler Druck150 PSI
BetriebsartAutomatisch
AnzeigetypDigitale LED
Dimensions of the digital air pump

Image: Visual representation of the digital air pump's dimensions, showing its height, width, and depth in both millimeters and inches.

Garantie und Support

For warranty information or technical support, please refer to the contact details provided on your product packaging or the retailer's webBewahren Sie Ihren Kaufbeleg als Kaufnachweis auf.

For further assistance, you may also visit the WLLKIY brand store on Amazon: WLLKIY Amazon Store

© 2024 WLLKIY. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.