1. Einleitung
The WLLKIY ISolar SMX II 3.6KW Hybrid Solar Inverter is an advanced power solution designed for off-grid solar systems. It integrates a solar charge controller, inverter, and battery charger into one unit, offering a comprehensive power management system. This inverter features full digital voltage and current control with a dual closed-loop system, advanced SPWM technology for pure sine wave output, and multiple charging modes to optimize energy utilization.
Zu den Hauptmerkmalen gehören:
- Reiner Sinuswellenausgang für empfindliche Elektronik.
- Dual output modes: utility bypass and inverter output for uninterrupted power supply.
- Four charging modes: Solar Only, Utility Priority, Solar Priority, and Hybrid (Utility & Solar).
- Advanced MPPT technology for high solar charging efficiency.
- Configurable charging current for various battery types.
- Energy-saving mode to reduce no-load power consumption.
- Intelligent variable speed fan for effective heat dissipation and extended system life.
- Lithium battery activation design, compatible with both lead-acid and lithium batteries.
- Comprehensive 360-degree protection against overload, short circuit, and overcurrent.
- Multiple communication modules (RS485, GPRS, WiFi, USB) for remote monitoring and operation.
Abbildung 1: Vorderseite view of the WLLKIY ISolar SMX II 3.6KW Hybrid Solar Inverter.
Figure 2: Key specifications highlighted on the inverter, including 3.6KW power, 24V system, 80A maximum charge current, 3600W maximum PV array power, and 500VDC maximum PV array voltage.
2. Einrichtung und Installation
Before installation, ensure the inverter is placed in a well-ventilated area, away from direct sunlight, heat sources, and flammable materials. The mounting surface should be sturdy enough to support the inverter's weight.
2.1 Systemanschlussplan
The inverter can be integrated into various power systems, including solar panels, utility grid, generators, and battery banks, to power home appliances.
Figure 3: Diagram illustrating the typical connections for the hybrid solar inverter, including solar panels, a generator, the utility grid, battery packs, and various home appliances.
2.2 PV-Panel-Konfiguration
Proper configuration of your photovoltaic (PV) panels is crucial for optimal performance and safety.
Figure 4: PV configuration details for the ISolar SMX II 3.6KW, including a diagram of PV panels connected to the inverter on a rooftop, and a table specifying maximum PV panels (4000W), PV operating voltage range (120-500VDC), PV charging current range (80A), and module connection details.
Wichtiger Sicherheitshinweis: Ensure all connections are secure and correctly polarized. Consult a qualified electrician for installation if you are unsure. Always disconnect all power sources before performing any wiring or maintenance.
3. Bedienungsanleitung
The inverter features an intuitive LCD screen for real-time operation monitoring and configuration.
Figure 5: The inverter's LCD screen for real-time operation display, alongside illustrations of the four available charging modes: Only Solar, Mains Priority, Solar Priority, and Mains & Solar Hybrid.
3.1 Lademodi
The inverter supports four distinct charging modes, allowing you to optimize energy usage based on your preferences and available power sources:
- Nur Solar: The inverter prioritizes charging batteries exclusively from solar power. The utility grid will not be used for charging.
- Hauptpriorität: The inverter prioritizes charging batteries from the utility grid. Solar power will be used as a secondary source if the grid is unavailable or insufficient.
- Priorität für Solarenergie: The inverter prioritizes charging batteries from solar power. The utility grid will only be used if solar power is insufficient or unavailable.
- Netz- und Solarhybrid: The inverter uses both the utility grid and solar power simultaneously to charge the batteries, maximizing charging speed and efficiency.
3.2 AC Output Control
The inverter features an ON/OFF rocker switch to control the AC output. Ensure this switch is in the 'ON' position for the inverter to supply power to your loads.
3.3 Energiesparmodus
To reduce power consumption when no load or a very light load is connected, the inverter can be configured to operate in an energy-saving mode. Refer to the detailed settings in the full manual for activation and configuration.
4. Wartung
Regular maintenance ensures the longevity and optimal performance of your WLLKIY ISolar SMX II 3.6KW Hybrid Solar Inverter.
- Reinigung: Reinigen Sie die Außenseite des Wechselrichters regelmäßig mit einem trockenen, weichen Tuch. Achten Sie darauf, dass die Lüftungsöffnungen frei von Staub und Schmutz sind. Verwenden Sie keine flüssigen Reinigungsmittel.
- Lüfterinspektion: The inverter uses an intelligent variable speed fan for cooling. Ensure the fan is not obstructed and operates quietly. Excessive noise or lack of operation may indicate a problem.
- Verbindungsprüfungen: Annually, inspect all electrical connections (PV, battery, AC input/output) for tightness and signs of corrosion. Loose connections can lead to overheating and system failure.
- Batteriezustand: Monitor your battery bank's health according to the battery manufacturer's guidelines. Ensure proper charging parameters are set on the inverter for your specific battery type.
- Umgebungsbedingungen: Stellen Sie sicher, dass die Betriebsumgebung des Wechselrichters innerhalb der vorgegebenen Temperatur- und Feuchtigkeitsbereiche bleibt.
Warnung: Always turn off all power sources (PV, utility, battery) and wait for the inverter to fully discharge before performing any internal maintenance or inspection.
5. Fehlerbehebung
Dieser Abschnitt enthält grundlegende Schritte zur Fehlerbehebung bei häufig auftretenden Problemen. Bei komplexeren Problemen wenden Sie sich bitte an den Kundensupport.
- Keine Leistungsabgabe:
- Check if the AC output switch is ON.
- Überprüfen Sie die Batterieanschlüsse und den Ladezustand.
- Check for any tripped circuit breakers or blown fuses.
- Ensure PV input is sufficient if operating in solar-only modes.
- Inverter Overload Alarm:
- Reduzieren Sie die angeschlossene Last.
- Prüfen Sie die Verdrahtung der Last auf Kurzschlüsse.
- Akku lädt nicht:
- Verify PV panel connections and ensure adequate sunlight.
- Check utility grid connection if using grid charging modes.
- Ensure battery type and charging parameters are correctly set.
- Communication Issues (WIFI/USB):
- Ensure communication modules are correctly installed.
- Check network connectivity for WIFI.
- Refer to the specific communication module manual for detailed setup.
6. Spezifikationen
The following table provides detailed technical specifications for the WLLKIY ISolar SMX II 3.6KW Hybrid Solar Inverter.
Figure 6: Product label displaying detailed specifications for the ISolar-SMX-II-3.6KW model.
| Besonderheit | Spezifikation |
|---|---|
| Marke | WLLKIY |
| Modellname | ISolar-SMX-II-3.6KW |
| Nennleistung am Wechselstromausgang | 3600 VA / 3600 W. |
| AC-Ausgangsvolumentage | 230 VAC ± 5% |
| AC-Ausgangsnennstrom | 15.6 A |
| AC-Eingangslautstärketage Reichweite | (170V~280Vac)±2% or (90Vac-280Vac)±2% |
| AC-Eingangsfrequenz | 50Hz / 60Hz (Auto sensing) |
| Max. AC Bypass Overload Current | 30 A |
| Batterie-Nennvolumentage | 24 V Gleichstrom |
| Batterie Voltage Reichweite | 20-33 V DC |
| Maximaler Wechselstrom | 80 A |
| Max. PV-Array-Leistung | 4000 W |
| Max. PV Array Open Voltage (VOC) | 500 V Gleichstrom |
| MPPT-Eingangsvoltage Reichweite | 120-450 V DC |
| Max. PV-Eingangsstrom | 13 A |
| Max. Solarladestrom | 80 A |
| Efficiency (Bypass and Inverter) | >95 % |
| Switching Time (Bypass and Inverter) | 10 ms (typisch) |
| Betriebstemperaturbereich | -15°C to 55°C (derating above 45°C) |
| IP-Schutzart | IP20 |
| Sicherheitsklasse | I |
7. Garantie und Support
For warranty information and technical support, please refer to the documentation provided with your purchase or contact WLLKIY customer service. Ensure you have your product model number (ISolar SMX II 3.6KW) and purchase details available when seeking support.