XUANZIT LLR104 Digital Alarm Clock User Manual

1. Einleitung

This manual provides detailed instructions for the setup, operation, and maintenance of your XUANZIT LLR104 Digital Alarm Clock. Please read this manual thoroughly before using the product to ensure proper function and longevity.

XUANZIT LLR104 Digital Alarm Clock, front view showing green LED display

Figure 1: XUANZIT LLR104 Digital Alarm Clock. This image displays the front of the clock with its green LED display showing the time 10:24 PM, and the control buttons below the display.

Produkteigenschaften:

Dimmable LED Display: Ultra-clear display with 6 levels of brightness.
Loud Alarm: 5-level adjustable buzzer volume (65 to 85 dB).
Plug-in Electric: Powered via USB-C connector.
Memory Function: 2xAAA battery backup preserves time and settings during power outages.
Simple Operation: All primary buttons located on the front for ease of use.
Time Format: Switchable 12/24-hour display.
Snooze Function: Adjustable snooze time from 1 to 15 minutes.

2. Einrichtung

2.1 Stromanschluss

Connect the provided USB-C cable to the USB-C port on the back of the alarm clock.
Plug the other end of the USB-C cable into a compatible USB power adapter (not always included) and then into a wall outlet. The clock display will illuminate.
For memory backup, open the battery compartment on the back of the clock and insert 2 AAA batteries (not included). These batteries will preserve time and alarm settings in case of a power interruption, but will not power the display.

Zurück view of XUANZIT LLR104 Digital Alarm Clock showing USB-C port and battery compartment

Figure 2: Power and Battery Backup. This image shows the rear of the clock, highlighting the Universal USB-C Connector for power input and the 2 x AAA Battery Compartment for memory function.

2.2 Anfangszeiteinstellung

Drücken und halten Sie die "Time-Set" button (labeled "12/24hr Time-Set") located on the front of the clock. The hour digits will begin to flash.
Verwenden Sie die "+" oder "-" buttons to adjust the hour. Pay attention to the PM indicator if using 12-hour format.
Drücken Sie die "Time-Set" button again to switch to minute adjustment. The minute digits will flash.
Verwenden Sie die "+" oder "-" buttons to adjust the minutes.
Drücken Sie die "Time-Set" button a third time to confirm the time setting and exit time setting mode.

3. Bedienungsanleitung

Front view of XUANZIT LLR104 Digital Alarm Clock showing all control buttons

Figure 3: Front Panel Controls. This image highlights the five control buttons on the front of the clock: 12/24hr Time-Set, ON/OFF AL-Set, SNOOZE, -, and +.

3.1 Einstellung des 12/24-Stunden-Formats

To switch between 12-hour and 24-hour time display, briefly press the "Time-Set" button (labeled "12/24hr Time-Set") when not in time setting mode. The PM indicator will appear for 12-hour format (PM only, AM is implied by absence of PM).

Comparison of 12-hour and 24-hour time formats on XUANZIT LLR104 Digital Alarm Clock

Figure 4: 12Hr and 24Hr Time Formats. This image illustrates the clock displaying time in both 12-hour format (10:24 PM) and 24-hour format (22:24).

3.2 Wecker stellen

Drücken und halten Sie die "AL-Set" button (labeled "ON/OFF AL-Set"). The alarm hour digits will begin to flash, and an alarm icon (bell symbol) will appear on the display.
Verwenden Sie die "+" oder "-" buttons to adjust the alarm hour.
Drücken Sie die "AL-Set" button again to switch to alarm minute adjustment. The alarm minute digits will flash.
Verwenden Sie die "+" oder "-" buttons to adjust the alarm minutes.
Drücken Sie die "AL-Set" button a third time to confirm the alarm setting. The alarm icon will remain on, indicating the alarm is active.

3.3 Alarm ein-/ausschalten

Briefly press the "AL-Set" button (labeled "ON/OFF AL-Set") when not in alarm setting mode to toggle the alarm on or off. The alarm icon will appear when the alarm is active and disappear when it is off.

3.4 Einstellen der Alarmlautstärke

When the alarm is sounding, press the "+" oder "-" buttons to cycle through the 5 available buzzer volume levels (65dB to 85dB). The selected volume will be saved for future alarms.

XUANZIT LLR104 Digital Alarm Clock with 5-level buzzer volume indicator

Figure 5: Adjustable Alarm Volume. This image shows the clock with an overlay indicating 5 levels of buzzer volume, ranging from Quiet (65dB) to Extra Loud (85dB).

3.5 Einstellen der Displayhelligkeit

Briefly press the "SCHLAFEN" button when the alarm is not sounding to cycle through the 6 levels of LED display brightness. Select the brightness level that suits your preference.

XUANZIT LLR104 Digital Alarm Clock showing different brightness levels

Figure 6: Dimmable LED Display. This image demonstrates the clock's display at various brightness levels, from very dim to very bright.

3.6 Schlummerfunktion

When the alarm sounds, press the "SCHLAFEN" button to temporarily silence the alarm. The alarm will sound again after the preset snooze duration. The default snooze duration is 9 minutes. To adjust the snooze duration (1-15 minutes):

While the alarm is sounding, press and hold the "SCHLAFEN" button. The snooze duration will flash.
Verwenden Sie die "+" oder "-" buttons to set your desired snooze duration (1-15 minutes).
Briefly press the "SCHLAFEN" button again to confirm the setting and activate snooze.

To turn off the alarm completely when it is sounding, press any button other than "SCHLAFEN" (e.g., "ON/OFF AL-Set", "Time-Set", "+", or "-").

4. Wartung

4.1 Reinigung

Ensure the clock is unplugged from the power source before cleaning.
Wischen Sie die Oberfläche der Uhr mit einem weichen, trockenen oder leicht feuchten Tuch ab.amp Tuch.
Verwenden Sie keine Scheuermittel, Lösungsmittel oder chemische Sprays, da diese die Oberfläche oder interne Bauteile beschädigen können.

4.2 Batteriewechsel (Notstromversorgung)

If the clock frequently loses time or settings during brief power interruptions, the AAA backup batteries may need replacement.
Unplug the clock from the main power source.
Öffnen Sie das Batteriefach auf der Rückseite der Uhr.
Entfernen Sie die alten AAA-Batterien und setzen Sie zwei neue AAA-Batterien ein. Achten Sie dabei auf die richtige Polarität (+/-).
Close the battery compartment and reconnect the clock to its power source.

5. Fehlerbehebung

Problem	Mögliche Ursache	Lösung
Die Uhranzeige ist aus.	Keine Stromversorgung.	Ensure the USB-C cable is securely connected to the clock and a working power adapter/outlet.
Uhr verliert Zeit/Einstellungen nach Stromausfalltage.	Die Notstrombatterien sind defekt oder nicht installiert.	Install 2 new AAA batteries or replace existing ones in the battery compartment.
Der Alarm ertönt nicht.	Der Alarm ist nicht aktiviert oder die Lautstärke ist zu niedrig.	Ensure the alarm icon is visible on the display. Adjust alarm volume using the '+' or '-' buttons when the alarm is sounding.
Das Display ist zu hell/zu dunkel.	Die Helligkeit muss angepasst werden.	Briefly press the "SNOOZE" button to cycle through brightness levels.
Uhrzeit/Wecker können nicht eingestellt werden.	Not in setting mode or buttons not responding.	Press and hold "Time-Set" or "AL-Set" until digits flash. If unresponsive, unplug and replug the clock to reset.

6. Spezifikationen

Modell: LLR104 (XZT104G)
Marke: XUANZIT
Anzeigetyp: LED
Energiequelle: USB-C (Input: DC 5V)
Backup-Batterie: 2 x AAA (not included, for memory function only)
Alarmlautstärke: 5 levels, 65-85 dB
Bildschirmhelligkeit: 6 Stufen
Schlummerdauer: Einstellbar von 1 bis 15 Minuten
Zeitformat: 12/24 hour switchable
Material: Plastik
Produktabmessungen: Ungefähr 3.56 x 3.81 x 7.62 cm (1.4 x 1.5 x 3 Zoll)
Artikelgewicht: Ungefähr 99.79 g (3.52 oz)

7. Kundendienst

For any questions, concerns, or technical assistance regarding your XUANZIT LLR104 Digital Alarm Clock, please refer to the retailer's customer service channels or visit the official XUANZIT webWebsite für Supportinformationen.

Bitte bewahren Sie dieses Handbuch zum späteren Nachschlagen auf.

XUANZIT LLR104