Peakeep Digitalwecker mit großem Display – Benutzerhandbuch

Einführung

Thank you for choosing the Peakeep Large Display Digital Alarm Clock. This manual provides detailed instructions for setting up and operating your new alarm clock. Designed for clarity and convenience, this clock features a large, dimmable display, automatic Daylight Saving Time adjustment, multiple alarm volume levels, and a USB charging port.

Aufstellen

Stromanschluss

The clock is primarily powered by the included Type C adapter. Connect the Type C cable to the 'TYPE C 5V IN' port on the back of the clock and plug the adapter into a standard wall outlet. The clock will immediately power on and display the time.

Batterie-Backup

Für Backup-Funktionalität bei Stromausfalltages, insert 4 AAA batteries (not provided) into the battery compartment on the underside of the clock. These batteries will preserve your settings and trigger the alarm in case of a power interruption, though the display will not remain lit continuously. Pressing the top 'SNOOZE/LIGHT' button will temporarily illuminate the screen for 20 seconds during battery backup mode.

Bedienungsanleitung

The control buttons are located on the back of the clock for easy access and a clean front display.

Zeiteinstellung

1. Press and hold the 'TIME SET' button until the hour digits flash.
2. Verwenden Sie die Tasten „+“ oder „-“, um die Stunde einzustellen.
3. Press 'TIME SET' again to move to minute adjustment, then use '+' or '-' to set minutes.
4. Continue pressing 'TIME SET' to cycle through year, month, and day settings, adjusting each with '+' or '-'.
5. Press 'TIME SET' one last time to confirm and exit.

12/24-Stunden-Format

Press the '12/24HR' button to toggle between 12-hour (with AM/PM indicator) and 24-hour time formats.

Temperatureinheit (°C/°F)

Press the '°C/°F' button to switch the temperature display between Celsius and Fahrenheit.

Alarmeinstellung

1. Press and hold the 'ALARM SET' button until the alarm hour digits flash.
2. Verwenden Sie die Tasten „+“ oder „-“, um die Alarmzeit einzustellen.
3. Press 'ALARM SET' again to move to minute adjustment, then use '+' or '-' to set alarm minutes.
4. Press 'ALARM SET' one last time to confirm.
5. To activate or deactivate the alarm, press the 'ON/OFF' button next to 'ALARM SET'. An alarm icon will appear on the display when active.

Einstellung der Alarmlautstärke

Press the 'VOLUME' button to cycle through 5 different alarm volume levels. Choose a volume suitable for your needs, from gentle to extra loud for heavy sleepers.

Sommerzeit (DST)

The clock features an automatic DST function. Press the 'DST ON/OFF' button to enable or disable this feature. When enabled, the clock will automatically adjust for Daylight Saving Time changes.

Bildschirmhelligkeit (Dimmer)

Press the 'DIMMER' button to cycle through 5 brightness levels (L1 to L5) or turn the display completely off. This allows for optimal visibility during the day and minimal disturbance at night.

Date/Day Display

Press the 'DAY/TEMP' button to switch between displaying the current day of the week and the indoor temperature.

USB-Ladeanschluss

A USB-A output port is located on the back of the clock. This port can be used to charge small electronic devices, such as smartphones, while the clock is powered.

Wartung

• Reinigung: Wischen Sie die Uhr mit einem weichen, trockenen Tuch ab. Vermeiden Sie die Verwendung von Scheuermitteln oder Lösungsmitteln.
• Batteriewechsel: Replace the 4 AAA backup batteries annually or when the battery backup function appears weak. Ensure correct polarity when inserting new batteries.
• Lagerung: Wenn Sie die Uhr über einen längeren Zeitraum lagern, entfernen Sie die AAA-Batterien, um ein Auslaufen zu verhindern.

Fehlerbehebung

• Anzeige ist leer: Ensure the Type C adapter is securely plugged into both the clock and a working power outlet. If using battery backup, the display will only light up for 20 seconds when the 'SNOOZE/LIGHT' button is pressed.
• Der Alarm ertönt nicht: Verify that the alarm is activated (alarm icon visible on display) and the volume is not set to the lowest level or muted. Check battery backup if power was interrupted.
• Die Zeitangabe ist falsch: Manually reset the time using the 'TIME SET' button. If Auto DST is enabled, ensure the current date is correctly set.
• USB-Ladefunktion funktioniert nicht: Confirm the clock is powered by the Type C adapter. The USB output port requires the main power supply to function.

Technische Daten

Garantie und Support

For any product inquiries, technical support, or warranty claims, please contact Peakeep customer service. You can reach us via email at sales@us-myhome.com.

Bitte bewahren Sie Ihren Kaufbeleg für Garantiezwecke auf.