Benutzerhandbuch für die Creality Space PI Filament-Trocknerbox

Einführung

The Creality Space PI Filament Dryer Box is designed to enhance 3D printing quality by effectively removing moisture from various filament types. This device features a built-in fan, a 3.7-inch touch screen, and 360° PTC heating technology to ensure optimal drying conditions for your 3D printing filaments.

Proper filament drying prevents common printing issues such as stringing, clogging, poor adhesion, and layer shifting, leading to improved print reliability and quality.

Produkteigenschaften

• PTC 360° Hot-air Heating System: Ensures quick and even heating with a built-in fan for 360° circulation of hot air, effectively drying moisture-laden filaments.
• Fortschrittliche PTC-Heiztechnologie: Utilizes an 80W PTC heater for uniform drying, offering a durable, energy-efficient, and eco-friendly solution.
• 3.7-Zoll-LCD-Touchscreen: Provides easy operation and real-time monitoring of temperature, humidity, and drying countdown.
• Smart Time Control: Customizable 48-hour timer function for thorough drying. Includes a power-off memory function to retain settings after power interruptions.
• Versatile Filament Compatibility: Supports up to 12 types of filaments, including PLA, PETG, ABS, Nylon, PLA-CF, PA-CF, ASA. Adjustable temperature range from 45°C to 70°C. Compatible with 1.75mm, 2.85mm, and 3mm diameter filaments.

Packungsinhalt

• Creality Space PI Filament Dryer
• Netzteil
• Benutzerhandbuch (dieses Dokument)

Installationsanweisungen

1. Den Trockner auspacken: Carefully remove the Creality Space PI Filament Dryer from its packaging. Inspect for any damage.
2. Platzierung: Place the dryer on a stable, flat surface near your 3D printer, ensuring adequate ventilation around the unit.
3. Stromanschluss: Connect the provided power adapter to the dryer's power input port and then plug it into a suitable power outlet.
4. Filament laden:
   • Open the lid of the dryer.
   • Place your filament spool(s) onto the rollers inside the dryer. The dryer can accommodate two standard spools.
   • If printing directly from the dryer, feed the filament through one of the PTFE tube openings located at the top front of the unit. Ensure the silicone plug is properly seated when not in use to maintain a sealed environment.
   • Den Deckel fest verschließen.

Image: The Creality Space PI Filament Dryer Box with a filament spool loaded, showing the main unit and display.

Bedienungsanleitung

1. Einschalten: Flip the power switch located at the rear of the unit to the 'ON' position. The LCD touch screen will illuminate.
2. Verwendung des Touchscreens: The 3.7-inch LCD touch screen displays real-time temperature, humidity, and drying countdown.
   

   Image: The LCD touch screen showing drying countdown, real-time temperature, and real-time humidity.

3. Selecting Filament Type and Settings:
   • The dryer offers one-key preset temperature settings for 12 different filament types.
   • You can also manually adjust the temperature between 45°C and 70°C and the drying time from 0 to 48 hours using the on-screen controls.
   • Refer to the recommended settings table below for common filament types:
   

   Image: Recommended drying temperatures and times for different filament types.

   Recommended Drying Settings

   Filamenttyp	Temperatur	Trocknungszeit
   PLA	50°C	4-8 Stunden
   TPU	55°C	4-8 Stunden
   PP	55°C	4-8 Stunden
   ABS	65°C	8-12 Stunden
   ASA	65°C	8-12 Stunden
   PETG	60°C	4-8 Stunden
   PC	65°C	8-12 Stunden
   PA	65°C	>12h
   HAUSTIER	60°C	4-8 Stunden
   PLA-CF	50°C	4-8 Stunden
   PETG-CF	60°C	4-8 Stunden
   PA-CF	65°C	>12h

4. Trocknen beginnen: Once settings are configured, initiate the drying process. The dryer will begin heating and circulating air.
5. Speicherfunktion bei Stromausfall: Im Falle eines Stromausfallstage, the dryer will remember your last material and temperature settings, allowing for quick resumption of drying once power is restored.

Image: Depiction of the 360° hot-air heating system circulating air around the filament spool.

Image: The power-off memory function retaining settings after a power cycle.

Wartung

• Reinigung: Ensure the device is powered off and unplugged before cleaning. Use a soft, dry cloth to wipe the exterior. Avoid using abrasive cleaners or solvents.
• Trockenmittel: The dryer may contain desiccant packets. While the device actively heats, these packets primarily help maintain dryness when the unit is off. Replace desiccant packets periodically if they become saturated.
• Lagerung: Bei längerer Nichtbenutzung sollte der Trockner an einem kühlen, trockenen Ort aufbewahrt werden.

Fehlerbehebung

Problem: Das Filament ist nach dem Trocknen immer noch feucht.

Lösung: Ensure the drying temperature and time are appropriate for the filament type. Some highly hygroscopic filaments (e.g., Nylon, PC) may require longer drying times (e.g., >12 hours) or higher temperatures. Verify the lid is securely closed and the silicone plugs for the filament outlets are in place when not actively feeding filament to prevent moisture re-entry.

Problem: Dryer is not heating.

Lösung: Check if the power cable is securely connected and the power switch is in the 'ON' position. Ensure the power outlet is functional. If the issue persists, contact customer support.

Problem: Filament jams when feeding through the outlet.

Lösung: Ensure the filament is properly aligned with the PTFE tube opening. Some users have reported that the rubber grommet on the top may not secure the PTFE tubing sufficiently. Consider printing or acquiring a more secure PTFE quick plug and port if this becomes a recurring issue.

Image: Visual comparison demonstrating the improved print quality achieved with dried filament.

Technische Daten

Image: The dryer demonstrating compatibility with multiple filament diameters (1.75mm and 2.85mm).

Garantie und Support

For detailed warranty information, please refer to the warranty card included with your product or visit the official SainSmart webDie Garantiebedingungen decken in der Regel Herstellungsfehler für einen bestimmten Zeitraum ab Kaufdatum ab.

If you encounter any issues or require technical assistance, please contact SainSmart customer support through their official webWebsite oder die in Ihrer Produktdokumentation angegebenen Kontaktinformationen.

Hersteller: SainSmart