Globo Lighting BOSTON Outdoor Pedestal Light

1. Einleitung

Thank you for choosing the Globo Lighting BOSTON Outdoor Pedestal Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

Image 1.1: The BOSTON outdoor pedestal light providing illumination along a pathway.

2. Sicherheitshinweise

• Elektrische Sicherheit: Die Installation muss von einem qualifizierten Elektriker gemäß allen lokalen und nationalen Elektrovorschriften durchgeführt werden. Vor Installation, Wartungsarbeiten oder Lampenwechsel muss immer die Stromzufuhr am Hauptsicherungskasten unterbrochen werden.
• Verwendung im Außenbereich: This fixture is designed for outdoor use. Ensure all connections are waterproof and sealed appropriately to prevent water ingress.
• Lampentyp: Verwenden Sie ausschließlich E27-Glühbirnen mit der angegebenen Wattzahl.tage. Überschreiten Sie nicht die maximale Wattzahltage auf der Vorrichtung angegeben.
• Handhabung: Behandeln Sie die Leuchte vorsichtig. Vermeiden Sie es, sie fallen zu lassen oder starken Stößen auszusetzen.
• Reinigung: Verwenden Sie keine Scheuermittel oder Lösungsmittel. Reinigen Sie mit einem weichen, trockenen Tuch.amp Tuch.
• Hitze: Allow the bulb to cool completely before attempting to replace it.

3. Packungsinhalt

Bitte prüfen Sie vor Beginn der Installation, ob alle Komponenten vorhanden und unbeschädigt sind:

• 1x BOSTON Outdoor Pedestal Light Fixture (Model 105701)
• 1x Montagesockel
• 1x Set of Mounting Hardware (screws, anchors)
• 1x Benutzerhandbuch

Note: E27 bulb is not typically included and must be purchased separately.

4. Spezifikationen

5. Einrichtung und Installation

Wichtig: Vor Beginn der Installation muss sichergestellt werden, dass die Hauptstromversorgung am Leitungsschutzschalter ausgeschaltet ist.

1. Ort wählen: Select a suitable outdoor location for the pedestal light, ensuring it is on a stable, level surface and has access to the necessary electrical wiring.
2. Verkabelung vorbereiten: If not already present, run appropriate outdoor-rated electrical cable to the installation point. Consult a qualified electrician for this step.
3. Montieren Sie die Basis: Position the mounting base on the desired surface. Mark the drilling points through the holes in the base. Drill pilot holes and secure the base using the provided mounting hardware (screws and anchors). Ensure the base is firmly attached.
4. Elektrische Leitungen anschließen: Carefully connect the electrical wires from your power supply to the terminals inside the fixture. Follow the standard wiring color codes (e.g., Live, Neutral, Earth). Ensure all connections are secure and properly insulated.
5. Glühbirne einbauen: Insert a suitable E27 bulb (not included) into the lamp Halter. Nicht zu fest anziehen.
6. Sichere Befestigung: Attach the main body of the pedestal light to the mounted base, ensuring it is securely fastened and sealed against moisture.
7. Strom wiederherstellen: Sobald die Installation abgeschlossen und alle Verbindungen sicher hergestellt sind, schalten Sie die Stromversorgung am Hauptschalter wieder ein.

Image 5.1: The pedestal light installed on a patio, demonstrating a typical mounting scenario.

6. Bedienungsanleitung

The BOSTON Pedestal Light features an integrated motion sensor for automatic operation.

• Einschalten: Once installed and power is restored, the light will enter a warm-up period (typically a few seconds) before the motion sensor becomes active.
• Bewegungssensor: The integrated motion sensor detects movement within its detection range. When motion is detected, the light will illuminate.
• Automatische Abschaltung: After a period of no detected motion, the light will automatically turn off. The duration of illumination is typically pre-set or adjustable via controls on the sensor (if available). Refer to the sensor's specific markings for adjustment options.
• Tag-/Nachtsensor: The motion sensor also includes a photocell that prevents the light from activating during daylight hours, conserving energy. The light will only activate due to motion when ambient light levels are low enough.

Image 6.1: Detail of the motion sensor on the pedestal light, highlighting its detection area.

Image 6.2: The pedestal light operating at night, with the motion sensor detecting movement.

7. Wartung

• Reinigung: Reinigen Sie das Gerät regelmäßig mit einem weichen, damp cloth to remove dirt and debris. Do not use harsh chemicals or abrasive materials, as these can damage the finish or plastic components.
• Lampenwechsel:
  1. Ensure the power supply to the fixture is turned off at the circuit breaker.
  2. Lassen Sie die alte Glühbirne vollständig abkühlen, bevor Sie sie berühren.
  3. Carefully unscrew the top cover or access panel to reach the E27 bulb.
  4. Unscrew the old bulb and replace it with a new E27 bulb of the correct wattage.
  5. Securely reattach the cover or access panel, ensuring a watertight seal.
  6. Stromversorgung wiederherstellen.
• Inspektion: Periodically inspect the fixture for any signs of wear, damage, or loose connections. Address any issues promptly to ensure continued safe operation.

8. Fehlerbehebung

If you experience persistent issues not covered here, please contact a qualified electrician or the product supplier.

9. Garantie und Support

This product is covered by the standard warranty provided by the manufacturer. Please retain your proof of purchase for any warranty claims. For technical support or further assistance, please contact your retailer or the Globo Lighting customer service department.

Kontaktinformationen finden sich üblicherweise auf der Produktverpackung oder der offiziellen Website des Herstellers. webWebsite.