HUANUO Elektrischer Stehschreibtisch – Benutzerhandbuch

Einführung

Thank you for choosing the HUANUO Electric Standing Desk. This manual provides essential information for the safe and efficient use of your new adjustable height desk. Designed with a seamless one-piece desktop and robust construction, this desk offers a versatile and ergonomic workspace for your home office.

Key features include a strong steel frame with a 176 lbs weight capacity, a smooth one-piece desktop for enhanced stability, a spacious work surface, and electric height adjustment with four memory settings for comfortable sit-stand transitions.

Wichtige Sicherheitsinformationen

Please read and follow all instructions carefully before assembly and use. Failure to do so may result in injury or damage to the product.

• Befolgen Sie die Montageanleitung immer sorgfältig.
• Die empfohlene Höchstgewichtsgrenze von 80 kg (176 Pfund) darf nicht überschritten werden.
• Keep the work surface clear of obstacles during height adjustment.
• Stellen Sie sicher, dass der Schreibtisch ordnungsgemäß am Boden verankert ist, um ein Umkippen zu verhindern.
• Always unplug the desk when not in use or during assembly, cleaning, or maintenance to prevent electrical hazards.
• Halten Sie Kinder und Haustiere während des Betriebs vom Schreibtisch fern.

Einrichtung und Montage

The HUANUO Electric Standing Desk is designed for hassle-free assembly. A single-piece desktop simplifies the process compared to multi-panel designs. All necessary tools are included.

Auspacken und Inspektion

Carefully unpack all components and verify against the parts list in your included manual. Inspect all parts for any damage. If any parts are missing or damaged, please contact customer support.

Montageschritte

1. Montieren Sie den Rahmen: Attach the crossbars to the desk legs using the provided screws. Then, attach the leg bases to the bottom of the desk legs. Secure the side plates to the frame.
2. Attach the Transmission Rod: Loosen the coupling nut on the transmission rod. Connect one end of the rod to the motor drive shaft on the leg with the motor. Connect the other end to the opposite leg. Tighten the set screw to secure the rod.
3. Desktop anschließen: Carefully place the desktop upside down on a soft, clean surface. Position the assembled frame onto the desktop, aligning the pre-drilled holes. Secure the frame to the desktop using the provided screws.
4. Zubehör installieren: Attach the control panel to the front edge of the desktop. Install the two headphone hooks on either side of the desk as desired.
5. Kabel anschließen: Connect the motor cable and control panel cable to the control box. Plug the power adapter into the control box and then into a power outlet.

Figure 1: Simplified assembly process with a one-piece desktop.

Bedienungsanleitung

Your HUANUO Electric Standing Desk features an intuitive LED control panel for easy height adjustment and memory settings.

Höhenverstellung

• Verwenden Sie die Nach oben (^) Und Unten (v) arrow buttons on the control panel to manually adjust the desk height. The current height will be displayed on the LED screen.
• The desk can be adjusted between 28.35 inches (72 cm) and 46.46 inches (118 cm).

Speichereinstellungen

The desk allows you to save up to four preferred height positions for quick transitions.

1. Adjust the desk to your desired height using the Up (^) or Down (v) buttons.
2. Drücken und halten Sie eine der Speichertasten (1, 2, 3 oder 4) until the LED screen flashes or beeps, indicating the height has been saved.
3. To recall a saved height, simply press the corresponding memory button. The desk will automatically move to that preset position.

Figure 2: LED Control Panel for height adjustment and memory settings.

Figure 3: The desk supports 4 preset heights for quick transitions.

Wartung

Regelmäßige Wartung gewährleistet die Langlebigkeit und optimale Leistung Ihres elektrischen Stehschreibtisches von HUANUO.

• Reinigung: Wischen Sie die Tischplatte und den Rahmen mit einem weichen, fusselfreien Tuch ab.amp Mit einem Tuch abwischen. Vermeiden Sie aggressive Chemikalien oder Scheuermittel, die die Oberfläche beschädigen könnten.
• Kabelmanagement: Utilize the integrated cable management notches and included cable ties to keep cords organized and prevent them from getting caught during height adjustments.
• Regelmäßige Kontrollen: Überprüfen Sie regelmäßig alle Schrauben und Bolzen auf festen Sitz. Ziehen Sie sie gegebenenfalls nach.
• Motorpflege: The powerful motor is designed for durability. Avoid overloading the desk beyond its 176 lbs capacity.

Figure 4: Integrated cable management and storage hooks help maintain a tidy workspace.

Fehlerbehebung

Sollten Sie Probleme mit Ihrem Schreibtisch haben, beachten Sie bitte die folgenden gängigen Lösungsansätze:

• Schreibtisch bewegt sich nicht: Ensure all cables are securely connected to the control box and the power outlet. Check if the power outlet is functioning correctly.
• Ungleiche Höhe: If the desk appears uneven, check the adjustable leveling feet at the bottom of the legs and adjust them to stabilize the desk on uneven surfaces.
• Fehlercode auf dem Display: Die detaillierte Fehlercode-Interpretation und Lösungsvorschläge finden Sie im Abschnitt zur Fehlerbehebung in Ihrem gedruckten Handbuch.
• Geräusche während des Betriebs: A low-noise operation is standard. If you notice unusual or excessive noise, ensure all assembly bolts are tightened.

For further assistance, please contact HUANUO customer support.

Technische Daten

Figure 5: Desk Dimensions and adjustable height range.

Figure 6: The desk supports a maximum weight capacity of 176 lbs.

Garantieinformationen

This HUANUO Electric Standing Desk comes with a Limited Warranty. For specific terms and conditions, please refer to the warranty card included with your product or contact HUANUO customer support.

Kundenservice

For any questions regarding assembly, operation, troubleshooting, or warranty claims, please contact our dedicated support team:

• E-Mail: support@huanuo.com
• Verkäufer: Bestergo Direct