Redodo 12V 100Ah LiFePO4 Bluetooth-Akku – Benutzerhandbuch

1. Einleitung

This manual provides essential information for the safe and efficient operation of your Redodo 12V 100Ah LiFePO4 Bluetooth Battery. Designed for deep cycle applications, this battery is ideal for marine, RV, solar, and off-grid power systems. Please read this manual thoroughly before use and retain it for future reference.

Image: The Redodo 12V 100Ah LiFePO4 Bluetooth Battery, showcasing durch sein kompaktes Design und die integrierten Griffe.

2. Sicherheitshinweise

Wichtige Sicherheitsvorkehrungen:

• Beim Umgang mit Batterien ist stets geeignete persönliche Schutzausrüstung (PSA) zu tragen.
• Schließen Sie die Batteriepole nicht kurz.
• Sorgen Sie während des Lade- und Entladevorgangs für ausreichende Belüftung.
• Setzen Sie die Batterie keinem Feuer oder extremer Hitze aus.
• Vermeiden Sie es, den Akku fallen zu lassen oder ihn physisch zu beschädigen.
• Use only LiFePO4 compatible chargers.
• Do not connect batteries with different chemistries or voltages in series/parallel.
• Bewahren Sie die Batterie außerhalb der Reichweite von Kindern und Haustieren auf.
• Im Brandfall einen Feuerlöscher der Klasse D verwenden. Wasser kann Lithiumbrände verschlimmern.

Niedertemperaturschutz: This battery features a built-in low-temperature protection system. It automatically stops charging below 32°F (0°C) and resumes above 41°F (5°C). Discharge halts at -4°F (-20°C). This ensures safe operation and prevents damage in freezing climates.

3. Lieferumfang

• Redodo 12.8V 100Ah LiFePO4 Battery with Low Temp Cut Off
• Bedienungsanleitung
• Terminal Bolts (M8)

4. Hauptmerkmale

• Built-in Low-Temperature Protection: Automatically stops charging below 32°F (0°C) and resumes above 41°F (5°C). Discharge halts at -4°F (-20°C).
• Compact Group 24 Design: Standard BCI Group 24 case for easy drop-in replacement in RVs, boats, and campERS.
• Bluetooth-App-Überwachung: Echtzeitüberwachung von Voltage, current, capacity, and discharge control via Redodo App and Bluetooth 5.0 (up to 10 meters).
• Leichtbauweise: Weighs only 22.16 lbs, approximately one-third the weight of comparable AGM batteries.
• Enhanced BMS Protection: Rugged, upgraded Battery Management System (BMS) offers waterproof, salt-spray, and corrosion protection, along with comprehensive safety features (precharge, low/high temp, overcharge/over-discharge, short circuit, overcurrent, auto-recovery from overloads).
• Expandable for Versatile Power: Connect up to four 12V 100Ah LiFePO4 batteries in series (up to 48V) or parallel (up to 400Ah).
• Long 10-Year Lifespan: Built with Grade A cells, delivering 4000+ cycles at 100% Depth of Discharge (DoD).

Image: A Redodo battery with a smartphone displaying the real-time battery status monitoring app, showing remaining usage time, SOC, voltage, current, and remote control options.

5. Einrichtungsanweisungen

1. Auspacken: Carefully remove the battery and all accessories from the packaging. Inspect for any visible damage.
2. Grundgebühr: Es wird empfohlen, den Akku vor dem ersten Gebrauch vollständig aufzuladen. Verwenden Sie ein kompatibles LiFePO4-Ladegerät.
3. Terminalanschluss:
   • Stellen Sie sicher, dass alle Verbindungen sauber und frei von Korrosion sind.
   • Connect the positive (+) terminal of the battery to the positive (+) terminal of your system using appropriate gauge cables.
   • Verbinden Sie den Minuspol (-) der Batterie mit dem Minuspol (-) Ihres Systems.
   • Tighten all terminal connections securely using the provided M8 bolts and washers.
4. App Installation (for Bluetooth Monitoring):
   • Download the "Redodo App" from your smartphone's app store (Google Play or Apple App Store).
   • Aktivieren Sie Bluetooth auf Ihrem Smartphone.
   • Open the Redodo App and follow the on-screen instructions to pair with your battery. You may need to scan a QR code on the battery or manually select it from a list of nearby devices.

Image: A person lifting the lightweight Redodo battery using its integrated handles, highlighting its portability.

6. Bedienungsanleitung

Your Redodo LiFePO4 battery is designed for deep cycle applications. It can power various devices and systems in RVs, boats, solar setups, and off-grid power systems.

• Geräte mit Strom versorgen: Connect your 12V devices or inverter to the battery terminals. Ensure the total current draw does not exceed the battery's maximum continuous discharge current (100A).
• Betrieb bei niedrigen Temperaturen: The built-in BMS will automatically manage charging and discharging based on temperature to prevent damage. No user intervention is required for this feature.
• Remote Control (via App): Use the Redodo App to monitor battery status and, if supported, control discharge or power-off functions remotely.

Image: A Redodo battery in an outdoor setting, with a smartphone displaying the app's capacity monitoring feature, ensuring users always know how much power is left.

7. Laden des Akkus

Use a dedicated LiFePO4 battery charger with a recommended charging voltage between 14.2V to 14.6V. The recommended charging current is 0.2C (20A for a 100Ah battery) for standard charging, or up to 1C (100A) for fast charging. The battery will reach its full capacity of 100% after approximately 5 hours of charging at 0.2C.

• AC-Ladegerät: Connect a compatible LiFePO4 AC charger to the battery terminals.
• Solarladung: Connect the battery to a solar charge controller (LiFePO4 compatible) and then to solar panels.
• Alternator/Generator Charging: If your alternator or generator supports DC output, it may be used to charge the battery. Consult your vehicle's manual or a qualified technician for proper setup.

8. Bluetooth-App-Überwachung

The Redodo App provides comprehensive real-time data and control over your battery. Ensure your phone is within 10 meters (33 feet) of the battery for optimal Bluetooth connection.

• Echtzeitstatus: View voltage, current, power, state of charge (SOC), and remaining capacity.
• Zyklenanzahl: Track the number of charge/discharge cycles.
• Temperatur: Monitor the internal temperature of the battery.
• Fernbedienung: Manage discharge and power-off functions directly from the app.
• Alarms & Protection: Receive alerts for various protection states (e.g., over-voltage, unter-voltage, Überstrom).

Image: Screenshot of the Redodo App interface, illustrating real-time battery status, including SOC, voltage, Stromstärke und Kapazität.

9. Reihen- und Parallelschaltung

The Redodo 12V 100Ah LiFePO4 battery supports connections of up to four batteries in series or parallel to achieve higher voltage or capacity configurations.

• Reihenschaltung: Connect up to four batteries in series to increase the voltage (e.g., two 12V batteries in series create a 24V system). Ensure all batteries are of the same model and capacity.
• Parallele Verbindung: Connect up to four batteries in parallel to increase the total capacity (e.g., two 12V 100Ah batteries in parallel create a 12V 200Ah system). Ensure all batteries are of the same model and capacity.
• Auswuchten: Before connecting multiple batteries, ensure they are fully charged and balanced to minimize voltagDie Unterschiede.

Image: An illustration showing multiple Redodo batteries connected in a solar power setup, demonstrating their expandability for versatile power solutions.

10. Wartung

• Regelmäßige Inspektion: Überprüfen Sie regelmäßig die Batteriepole auf Sauberkeit und festen Sitz.
• Reinigung: Keep the battery clean and dry. Use a dry cloth to wipe the battery case.
• Lagerung: For long-term storage, charge the battery to 50-70% SOC and store it in a cool, dry place. Recharge every 3-6 months to maintain battery health.
• Tiefentladung vermeiden: While the battery can handle 100% DoD, avoiding frequent deep discharges can extend its overall lifespan.

11. Fehlerbehebung

Sollten Sie Probleme mit Ihrem Akku haben, beachten Sie bitte die folgenden häufigen Probleme und Lösungen:

• Akku lädt nicht:
  • Check charger compatibility: Ensure you are using a LiFePO4 compatible charger.
  • Verify connections: Make sure all cables are securely connected and polarity is correct.
  • Check temperature: If below 32°F (0°C), the battery will not charge due to low-temperature protection.
  • BMS tripped: If the battery has been deeply discharged (0V), use a low-power charger (2-5A) for a few minutes to activate the BMS.
• Batterie entlädt sich nicht:
  • Check load: Ensure the load is within the battery's specifications (max continuous discharge 100A).
  • Verify connections: Ensure all cables are securely connected.
  • Check temperature: If below -4°F (-20°C), the battery will not discharge due to low-temperature protection.
  • BMS tripped: The BMS may have tripped due to over-current, over-voltage oder Untervoltage. Disconnect the load, wait 30 seconds for auto-recovery, and then reconnect.
• Verbindungsprobleme mit der Bluetooth-App:
  • Stellen Sie sicher, dass Bluetooth auf Ihrem Telefon aktiviert ist.
  • Make sure your phone is within 10 meters (33 feet) of the battery.
  • Starten Sie die App oder Ihr Telefon neu.

12. Technische Daten

13. Garantie und Kundendienst

Redodo bietet ein 5 Jahre Garantie on this LiFePO4 battery. For any questions, technical assistance, or warranty claims, please contact our dedicated customer support team.

• Kundendienst: Our team provides round-the-clock one-on-one support to ensure your energy system runs smoothly.
• Kontaktinformationen: Refer to the product packaging or Redodo's official webDie aktuellsten Kontaktdaten finden Sie auf der Website.