1. Einleitung
Thank you for choosing the MCGOR GLS-C010 Rechargeable Motion Sensor Under Cabinet Light. This manual provides detailed instructions for the safe and efficient use of your new light. This product features a motion sensor, dimmable brightness, and a rechargeable battery, making it suitable for various indoor applications such as kitchens, closets, and hallways.
2. Sicherheitshinweise
- Do not expose the light to water or high humidity. This product is not water-resistant.
- Das Gerät darf nicht zerlegt oder verändert werden. Nicht autorisierte Änderungen können zu Schäden oder Verletzungen führen.
- Außerhalb der Reichweite von Kindern aufbewahren.
- Verwenden Sie zum Aufladen ausschließlich das mitgelieferte USB-Kabel.
- Vermeiden Sie direkten Augenkontakt mit dem LED-Licht.
- Ensure the installation surface is clean and dry for optimal adhesive performance.
3. Packungsinhalt
Bitte prüfen Sie das Paket auf folgende Artikel:
- 1 x Under Cabinet Light (MCGOR GLS-C010)
- 1 x USB-Ladekabel
- 2 x Iron Plates (for magnetic mounting)
4. Produktüberschreitungview
The MCGOR GLS-C010 light bar is designed for versatile illumination with intelligent features.
Image 1: The MCGOR GLS-C010 under cabinet light, showing its sleek design and included USB charging cable.
The light features a control panel with a switch and a brightness adjustment button, along with a PIR sensor and a USB-C charging port.
Abbildung 2: Detailansicht view of the control panel, including the ON/OFF/AUTO switch, brightness adjustment button, PIR sensor, and USB-C charging port.
5. Einrichtung und Installation
The MCGOR GLS-C010 offers two convenient installation methods: direct magnetic attachment or adhesive mounting using the included iron plates.
Image 3: Illustration of the two installation methods: direct magnetic attachment to metal surfaces or using adhesive metal plates for non-metal surfaces.
5.1. Magnetic Attachment (for Metal Surfaces)
If your desired installation surface is metal (e.g., a refrigerator or metal shelf), the light can be directly attached using its built-in magnets.
5.2. Adhesive Mounting (for Non-Metal Surfaces)
- Reinigen Sie die Oberfläche: Stellen Sie sicher, dass die Montagefläche sauber, trocken und glatt ist.
- Eisenplatten anbringen: Peel off the protective film from one side of the adhesive iron plate. Stick the plate firmly to the desired installation location. Repeat for the second plate if needed for longer lights or extra stability.
- Montieren Sie das Licht: The light has built-in magnets. Simply attach the light to the installed iron plates. This allows for easy removal for charging.
6. Bedienungsanleitung
The MCGOR GLS-C010 features a multi-function switch for different operating modes and a separate button for brightness adjustment.
6.1. Power Modes (ON/OFF/AUTO Switch)
- EIN-Modus: Slide the switch to 'ON'. The light will remain continuously on. This mode is suitable for tasks requiring prolonged illumination.
- Aus-Modus: Slide the switch to 'OFF'. The light will turn off completely.
- AUTO-Modus (Bewegungssensor): Slide the switch to 'AUTO'. In this mode, the light will automatically turn on when human motion is detected within 10 feet and a 120° angle in a dark or low-light environment. It will automatically turn off after approximately 20 seconds of no motion detected.
Image 4: Visual representation of the motion and light sensor functionality, showing detection range (10ft), angle (120°), and auto-off time (20 seconds).
6.2. Helligkeitseinstellung
The light offers 5 levels of brightness. While the light is on (in ON or AUTO mode), press the brightness adjustment button (located next to the main switch) to cycle through the available brightness levels. Release the button at your desired brightness.
6.3. Laden des Akkus
The light is equipped with an 1800mAh rechargeable lithium polymer battery. When the battery is low, the light's performance may diminish. To charge:
- Connect the provided USB charging cable to the USB-C port on the light.
- Connect the other end of the USB cable to a standard 5V USB power adapter (not included).
- Die Ladeanzeigeleuchte leuchtet während des Ladevorgangs und erlischt, sobald der Akku vollständig geladen ist.
Image 5: The MCGOR light being charged via its USB-C port, highlighting the 1800mAh battery capacity.
7. Wartung
- Reinigung: Reinigen Sie die Lampe mit einem weichen, trockenen Tuch. Verwenden Sie keine Scheuermittel oder Lösungsmittel.
- Batteriepflege: To prolong battery life, avoid fully discharging the battery frequently. Charge the light regularly, especially if it will not be used for an extended period.
- Lagerung: Bewahren Sie die Leuchte bei Nichtgebrauch an einem kühlen, trockenen Ort auf.
8. Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Licht geht nicht an. | Batterie ist leer. | Laden Sie die Leuchte mit dem mitgelieferten USB-Kabel auf. |
| Das Licht schaltet sich im AUTO-Modus nicht ein. | Die Umgebung ist zu hell. | AUTO mode only activates in dark or low-light conditions. Test in a darker area. |
| Keine Bewegung erkannt. | Ensure motion occurs within 10 feet and 120° of the sensor. | |
| Das Licht geht zu schnell aus. | Keine kontinuierliche Bewegung erkannt. | The light is designed to turn off after 20 seconds of no motion in AUTO mode. |
| Das Licht ist schwach oder flackert. | Schwache Batterie. | Laden Sie das Licht auf. |
9. Spezifikationen
| Besonderheit | Detail |
|---|---|
| Marke | MCGOR |
| Modellname | GLS-C010 |
| Lichtfarbe | Warmweißes Licht |
| Anzahl der LEDs | 40 |
| Helligkeit | Bis zu 180 Lumen |
| Batteriekapazität | 1800 mAh Lithium-Polymer |
| Stromquelle | Batteriebetrieben (aufladbar über USB) |
| Bandtage | 5 Volt (DC) |
| Material | Aluminium, Kunststoff |
| Technische Daten | 10"L x 1.4"B x 0.57"H (25.4 cm x 3.56 cm x 1.45 cm) |
| Artikelgewicht | 5.6 Unzen (158.76 g) |
| Reichweite des Bewegungssensors | 10 Fuß (3 Meter) |
| Bewegungssensorwinkel | 120° |
| Auto-Off-Zeit | Approx. 20 seconds (in AUTO mode) |
| Installationstyp | Under Cabinet Mount (Magnetic/Adhesive) |
| Verwendung im Innen- und Außenbereich | Nur für den Innenbereich |
| Wasserbeständigkeit | Nicht wasserfest |
10. Garantie und Support
MCGOR products are designed for quality and reliability. For any questions, technical support, or warranty inquiries, please contact MCGOR customer service through the retailer's platform where the product was purchased. Please retain your proof of purchase for warranty claims.