Einführung
Thank you for choosing the FULEN Motion Sensor Wall Lamp, Model WL04. This rechargeable LED wall light is designed to provide convenient and adjustable illumination for various indoor spaces. Featuring a sensitive motion sensor, remote control operation, and multiple color temperature options, this lamp enhances both functionality and ambiance. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.
Lieferumfang
- Wand lamp mit Bewegungssensor (x4)
- Fernbedienung (x1)
- Ladekabel (x4)
- Basis und doppelseitiges Klebepad (x6)
- Zubehörschraube (x4)
Produkteigenschaften
- Intelligenter Bewegungssensor: Automatically lights up in dark environments when motion is detected within 3.5 meters (11 feet) and a 120-degree wide angle. Turns off after 30 seconds of no activity.
- Akku mit großer Kapazität: Built-in 5000mAh battery provides up to 10 hours of continuous lighting at maximum brightness.
- Bequeme Fernbedienung: Control power, mode, brightness, and color temperature from up to 6-7 meters (22 feet) away. (Requires two AAA batteries for remote control, not included).
- Einstellbare Helligkeit und Farbtemperatur: Offers 600LM super bright and soft light with three color temperatures (Cold White, Natural White, Warm White) and five brightness levels.
- Einfache Installation: Two installation methods: adhesive pads for smooth surfaces or expansion screws for more permanent mounting.
- Vielseitig einsetzbar: Suitable for various indoor scenes such as living rooms, bedrooms, corridors, stairs, and kitchens.
Setup und Installation
The FULEN Motion Sensor Wall Lamp offers flexible installation options to suit your needs.
- Wählen Sie die Installationsmethode: Decide between using the double-sided adhesive pads for smooth walls or the provided expansion screws for other surfaces.
- Bereiten Sie die Basis vor: If using adhesive, peel off the protective film from the double-sided adhesive pad and firmly attach it to the back of the mounting base.
- Montieren Sie die Basis: Secure the base to your desired wall location. Ensure the 'UP' arrow on the base is pointing upwards. For adhesive, press firmly for 1-2 minutes. For screws, drill pilot holes and secure the base with the accessory screws.
- Befestigen Sie das Lamp: Align the wall lamp with the mounted base and slide it into place. The magnetic connection will secure the lamp.
Bedienungsanleitung
The FULEN Motion Sensor Wall Lamp can be operated via its integrated buttons or the included remote control.
Motion Sensor Mode (Auto Mode)
In dark environments, the lamp will automatically enter sensing mode. When human movement is detected within 3.5 meters (11 feet) and a 120-degree wide angle, the light will turn on. It will automatically turn off after 30 seconds of no further movement.
Fernbedienungsbetrieb
Use the remote control to conveniently adjust the lamp's settings:
- Ein-/Ausschalten: Drücken Sie den Netzschalter, um das l einzuschaltenamp ein oder aus.
- Helligkeitsanpassung: Use the brightness +/- buttons to increase or decrease the light intensity (5 levels).
- Farbtemperatur: Cycle through Cold White, Natural White, and Warm White color temperatures using the dedicated button.
- Timer-Einstellungen: Stellen Sie die lamp to turn off automatically after 10 or 30 minutes. A single blink confirms successful timer setting.
- Modusauswahl: Switch between 'On' (always on) and 'Auto' (motion sensor) modes.
Manuelle Tastenbedienung
Die lamp also features manual buttons for basic control:
- Netzschalter: Short press to cycle through color temperatures. Long press to adjust brightness.
- Modusschalter: Slide the switch to select ON (always on), AUTO (motion sensor), or OFF.
Offizielles Produktvideo: Bedienung und Funktionen
Video: Demonstrates the FULEN Motion Sensor Wall Light's color temperature changes, brightness adjustment, and motion sensing capabilities, along with detaching for charging.
Wartung
Aufladen des Lamp
The FULEN Motion Sensor Wall Lamp is equipped with a 5000mAh rechargeable battery. When the battery is low, detach the lamp from its magnetic base and connect it to a USB power source using the provided USB-C charging cable. A full charge typically takes approximately 5 hours and provides up to 10 hours of continuous use at maximum brightness.
Fehlerbehebung
- Lamp not turning on in Auto Mode: Ensure the environment is dark enough for the motion sensor to activate. Check if the lamp is fully charged. Verify the mode switch is set to 'AUTO'.
- Fernbedienung funktioniert nicht: Check if the remote control batteries (AAA) need replacement. Ensure there are no obstructions between the remote and the lamp's Sensor.
- Die Lichtausbeute ist gering: Adjust the brightness using the remote control or the manual button. Ensure the lamp ist vollständig aufgeladen.
- Lamp not holding charge: Ensure the charging cable is securely connected and the power source is functional. If issues persist, contact customer support.
Technische Daten
| Besonderheit | Detail |
|---|---|
| Marke | FULEN |
| Modellname | WL04 |
| Farbe | Weiß |
| Material | Acrylnitril-Butadien-Styrol |
| Technische Daten | 3.9 Zoll L x 3.4 Zoll B x 2 Zoll H |
| Stromquelle | AC/DC (Rechargeable Battery) |
| Batteriekapazität | 5000 mAh Lithium-Ionen-Akku (im Lieferumfang enthalten) |
| Lichtquellentyp | LED |
| Helligkeit | 600 Lumen (Maximal) |
| Farbtemperatur | 3000 Kelvin (Warm White), Natural White, Cold White |
| Kontrollmethode | Fernbedienung, berühren |
| Besondere Merkmale | Color Changing, Energy Efficient, Motion Sensor, Portable, Timer |
| Wasserbeständigkeit | Nicht wasserfest |
Garantie und Support
FULEN is committed to providing high-quality products. This product comes with an Extended Warranty Type. If you have any questions about your product or encounter any quality problems, please do not hesitate to contact the FULEN customer support team. We aim to respond and resolve your issues within 24 hours to ensure your satisfaction.