BSMOOM 7000A Jump Starter & 150 PSI Air Compressor Kit User Manual

1. Sicherheitshinweise

Bitte lesen Sie vor der Verwendung dieses Produkts alle Sicherheitshinweise und Anweisungen. Die Nichtbeachtung der Hinweise und Anweisungen kann zu Stromschlag, Brand und/oder schweren Verletzungen führen.

• Nicht Eine eingefrorene Batterie überbrücken.
• Nicht Verwenden Sie den Starthilfe-Booster, wenn die Kabel oder der Stecker defekt sind.amps sind beschädigt.
• Ensure proper polarity: Verbinden Sie die roteamp an den Pluspol (+) und den schwarzen clamp to the negative (-) terminal. Reverse polarity can cause damage.
• Entfernen Sie clamps promptly: Trennen Sie denamps from the vehicle battery immediately after the engine starts.
• Von Kindern fernhalten: Dieses Gerät ist kein Spielzeug.
• Betriebstemperatur: Use the device within the specified temperature range (-4°F to 140°F).
• Belüftung: Ensure adequate ventilation when operating the air compressor.
• Schutzfunktionen: The device is equipped with multiple protections including over-current, over-temperature, over-voltage, no spark, over-charge, over-discharge, short-circuit, anti-interference, reverse polarity, and low-temperature protection.

Image: BSMOOM Jump Starter with multiple safety protections. This image highlights the advanced safety features of the BSMOOM jump starter, including over-current, over-temperature, over-voltage, no spark, over-charge, over-discharge, short-circuit, anti-interference, reverse polarity, and low-temperature protection.

2. Produktüberschreitungview & Komponenten

The BSMOOM 7000A Jump Starter & 150 PSI Air Compressor Kit is a versatile device designed for emergency vehicle starting, tire inflation, and portable power supply.

2.1 Was ist in der Box?

Image: Contents included in the BSMOOM Jump Starter and Air Compressor Kit. This image displays all items included in the product box: the BSMOOM jump starter unit, smart jumper clamps, air hose, various air nozzles, USB charging cable, and the user manual.

• BSMOOM 7000A Jump Starter Unit
• Smart Jumper Klamps (Rot für positiv, Schwarz für negativ)
• Luftschlauch mit Schnellkupplung
• Various Air Nozzles (for different inflatables)
• USB-C-Ladekabel
• Bedienungsanleitung
• Aufbewahrungskoffer

2.2 Produktmerkmale

• 7000A Spitzenstrom: Capable of starting all gas engines and up to 10.0L diesel engines.
• 150 PSI Luftkompressor: Cordless inflator with tire pressure detection for various inflatables.
• 26800mAh Powerbank: Dual USB-A outputs and one USB-C input/output for charging digital devices.
• 3.4"-LCD-Display: Clear display for battery status, pressure readings, and operational modes.
• Doppelte LED-Leuchten: Features Normal, SOS, and Strobe modes for emergency illumination.
• Erweiterte Sicherheitsvorkehrungen: 10 types of protection for safe operation.
• Betrieb bei jedem Wetter: Designed to function in extreme temperatures from -4°F to 140°F.

Image: BSMOOM 7000A Jump Starter and Air Compressor Kit with accessories. This image displays the BSMOOM 7000A Jump Starter and Air Compressor Kit, including the main unit, heavy-duty jumper clamps (red and black), the flexible air hose with various nozzles, USB charging cables, and a compact carrying case.

Image: Key features of BSMOOM Powerful Car Jump Starter. This graphic highlights key features of the BSMOOM jump starter: 24 months standby time, 99Wh power, LCD screen, 2024 full chip upgrade, 3 LED modes, 10 protection mechanisms, and one-second startup capability.

2.3 Bedienfeld und Anschlüsse

Image: BSMOOM Jump Starter control panel and button functions. An illustration detailing the control panel of the BSMOOM jump starter, showing the functions of each button: Preset Air Pressure Up, Mode/Unit Switching, Power/Inflate Start, Light, and Preset Air Pressure Decrease.

• LCD Anzeige: Shows battery level, pressure, and mode.
• "M"-Taste: Mode/Unit Switching (e.g., PSI, BAR, KPA).
• "OK"-Schaltfläche: Power/Inflate Start.
• Light Button (*): Activates LED flashlight modes (Normal, SOS, Strobe).
• "+"-Schaltfläche: Preset Air Pressure Increase.
• "-" Taste: Preset Air Pressure Decrease.
• Starthilfeanschluss: Zum Anschließen von Smart-Jumper-Kabelnamps.
• Luftschlauchanschluss: Zum Anschließen des Luftschlauchs.
• USB-A-Ausgangsanschlüsse (x2): Zum Laden externer Geräte.
• USB-C-Ein-/Ausgangsanschluss (x1): Zum Aufladen von Starthilfegeräten oder externen Geräten.

3. Einrichtung

3.1 Aufladen des Starthilfekabels

Before first use, fully charge the BSMOOM jump starter. It is recommended to charge the device every 3-6 months to maintain battery health, even when not in use.

1. Connect the provided USB-C charging cable to the USB-C input/output port on the jump starter.
2. Verbinden Sie das andere Ende des USB-C-Kabels mit einem USB-Netzteil (nicht im Lieferumfang enthalten) oder einem USB-Anschluss mit Stromversorgung.
3. The LCD display will show the charging status. The battery indicator will fill up as it charges.
4. Der Ladevorgang ist abgeschlossen, wenn die Akkuanzeige „voll“ anzeigt.

4. Bedienungsanleitung

4.1 Starthilfe für Ihr Fahrzeug

Ensure the jump starter is sufficiently charged (at least 50% battery recommended).

1. Schritt 1: Stecken Sie den blauen Stecker des intelligenten Jumperkabels ein.amps into the jump start port on the BSMOOM unit. Ensure it is fully inserted.
2. Schritt 2: Verbinden Sie die rote (+) Klamp to the positive terminal of the vehicle's battery. Connect the black (-) clamp an den Minuspol der Fahrzeugbatterie.
3. Schritt 3: Sobald die Verbindung hergestellt ist, funktioniert der smarte Clientamps will indicate readiness (e.g., a solid green light or specific display on the unit). Turn on your vehicle's engine.
4. Schritt 4: Immediately after the engine starts, remove the clamps from the vehicle battery. First, remove the black (-) clampdann die rote (+) clampTrennen Sie die Smart-Client-Verbindung.amps vom Starthilfegerät.

Image: BSMOOM Jump Starter connected to a car battery for emergency starting. An illustration demonstrating the BSMOOM jump starter connected to a car battery, highlighting its capability to start various vehicles including those with 12V, all gas, and 10L diesel engines.

Image: Step-by-step guide for jump starting a car with BSMOOM Jump Starter. A four-step visual guide detailing the quick start car procedure: 1. Insert the starting cable into the starter. 2. Connect the clamps to the car's battery. 3. Turn on the engine. 4. Remove the clampunmittelbar nach dem Start.

4.2 Verwendung des Luftkompressors

1. Connect the air hose to the air hose port on the jump starter unit.
2. Attach the appropriate nozzle to the air hose for the item you wish to inflate (e.g., tire valve, ball needle).
3. Connect the nozzle to the item. The LCD display will show the current pressure.
4. Press the "M" button to select the desired unit (PSI, BAR, KPA).
5. Stellen Sie mit den Tasten "+" und "-" den gewünschten Zieldruck ein.
6. Press the "OK" button to start inflation. The compressor will automatically stop when the target pressure is reached.
7. Disconnect the nozzle and air hose.

Image: BSMOOM Jump Starter's air compressor inflating a car tire. The BSMOOM device is shown actively inflating a car tire, emphasizing its ultra-fast 150 PSI cordless inflation feature with tire pressure detection. It indicates inflation times for different PSI levels.

Image: BSMOOM Air Pump inflating various items. The image demonstrates the versatility of the BSMOOM 150 PSI ultra-fast inflation wireless digital air pump, showing its use for inflating car tires, motorcycle tires, bicycle tires, and sports balls.

4.3 Verwendung als Powerbank

1. Connect your digital device's charging cable to one of the USB-A output ports or the USB-C input/output port on the jump starter.
2. Connect the other end of the cable to your digital device.
3. Der Starthilfe-Booster beginnt automatisch mit dem Laden Ihres Geräts.

Image: BSMOOM Jump Starter used as a power bank to charge mobile devices. This image illustrates the BSMOOM jump starter functioning as a power bank, charging a smartphone and tablet via its USB-A and USB-C output ports, suitable for various digital devices.

4.4 Verwendung der LED-Taschenlampe

1. Press the Light button (*) once to turn on the flashlight in Normal mode.
2. Press the Light button (*) again to cycle through modes: SOS → Strobe → Off.

Image: BSMOOM Jump Starter's bright LED flashlight with SOS and Strobe modes. A visual representation of the BSMOOM jump starter's integrated bright LED flashlight, showcasing its 400-Lumen output and three modes: Normal, SOS, and Strobe, useful for emergencies.

5. Wartung

• Laden: Um die Batterielebensdauer zu verlängern, sollte der Starthilfe-Booster alle 3-6 Monate aufgeladen werden, auch wenn er nicht benutzt wird.
• Reinigung: Wischen Sie das Gerät mit einem trockenen, weichen Tuch ab. Verwenden Sie keine scharfen Chemikalien oder Scheuermittel.
• Lagerung: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it in its carrying case for protection.
• Kabelpflege: Überprüfen Sie Starthilfekabel und Luftschlauch vor jedem Gebrauch auf Beschädigungen.

6. Fehlerbehebung

7. Spezifikationen

Image: BSMOOM Jump Starter operating in extreme temperatures. This image illustrates the BSMOOM jump starter's capability to operate reliably in extreme weather conditions, from 140°F (hot) to -4°F (cold).

8. Garantie und Support

BSMOOM is committed to providing high-quality products and excellent customer service.

• 12 Months Product Quality Commitment: Your purchase is covered by a 12-month quality commitment from the date of purchase.
• 30 Days Unconditional Return Policy: You may return the product within 30 days of purchase for any reason.
• Kundensupport rund um die Uhr: For any questions, concerns, or support needs, please contact BSMOOM customer service. We aim to provide a quick reply within 24 hours.

For support, please refer to the contact information provided with your product packaging or visit the official BSMOOM webWebsite.