STRICH Tuner-Pedal und SPS-20 Gitarrennetzteil

1. Einleitung

Thank you for choosing the STRICH Tuner Pedal and SPS-20 Guitar Power Supply. This comprehensive manual provides detailed instructions for the setup, operation, and maintenance of your new equipment. The STRICH Tuner Pedal offers precise chromatic tuning with a large color screen and true bypass functionality, designed for electric guitars and basses. The STRICH SPS-20 Guitar Power Supply features 10 isolated DC outputs and 4 AC outlet sockets, ensuring clean and stable power for your effect pedals and other musical instruments.

Please read this manual thoroughly before using the product to ensure proper functionality and to maximize its lifespan. Keep this manual for future reference.

2. Produktüberschreitungview

The STRICH Tuner Pedal and SPS-20 Guitar Power Supply are designed to provide essential tools for musicians. The tuner ensures your instrument is perfectly in tune, while the power supply delivers reliable power to your pedalboard setup.

Hauptmerkmale:

Sleek Silver & Robust Design: Both units feature a durable zinc alloy casing for longevity and rigorous use.
Clear Color Display (Tuner): A 2-inch color screen clearly displays each note, simplifying the tuning process.
Broad Tuning Range (Tuner): Supports B0-C8 (30.868-4186.00Hz), suitable for guitars, bass, and other instruments.
True Bypass (Tuner): Ensures your tone remains unaffected when the pedal is disengaged.
10 Isolated DC Outputs (Power Supply): Includes 6 x 9V 100mA, 2 x 9V 500mA, 1 x 12V 100mA, and 1 x 18V 100mA outputs for various pedal requirements.
4 Top AC Outlet Socket Holes (Power Supply): Provides additional power outlets for other devices, supporting up to 600W.
Short-Circuit Protection (Power Supply): Each isolated output is protected against short circuits and overcurrent.

Produktkomponenten:

Abbildung 2.1: Überview of the STRICH Tuner Pedal and SPS-20 Guitar Power Supply.

STRICH Tuner Pedal with Large Color Screen

Figure 2.2: The tuner pedal features a large, clear color screen for easy readability of notes and tuning status.

Figure 2.3: The chromatic tuner allows for precise adjustment of the A4 reference frequency (e.g., 430Hz to 450Hz) with an accuracy of ±0.5 cents.

STRICH Tuner Pedal Digital Circuit Design

Figure 2.4: The tuner utilizes a digital circuit design for more precise and accurate tuning adjustments, indicating flat, in-tune, and sharp states.

Figure 2.5: The tuner pedal features true bypass, supporting one-click on/off effect switching with an indicator light display.

STRICH SPS-20 Guitar Power Supply High Power Output

Figure 2.6: The SPS-20 power supply offers high power output with 10 isolated DC outputs, including 9V, 12V, and 18V options for various effect pedals.

STRICH SPS-20 Guitar Power Supply AC Outlets

Figure 2.7: The SPS-20 includes 4 top AC outlet socket holes, providing additional power for other musical instruments or devices, with a maximum power capacity of 600W.

STRICH SPS-20 Guitar Power Supply Dimensions

Figure 2.8: The SPS-20 power supply is designed to be durable and scratch-resistant, made from reliable ABS plastic shell material, and is compact for easy portability.

STRICH SPS-20 Guitar Power Supply Short-Circuit Protection

Figure 2.9: The SPS-20 power supply features 10 isolated outputs with built-in short-circuit and overcurrent protection for enhanced safety and reliability.

3. Einrichtung

3.1 Tuner Pedal Setup

Stromanschluss: Connect a standard 9V DC power supply (center negative, not included) to the 'DC 9V' input jack on the tuner pedal.
Eingangsanschluss: Connect your guitar or bass to the 'INPUT' jack on the tuner pedal using a standard 1/4-inch instrument cable.
Ausgangsanschluss: Connect the 'OUTPUT' jack of the tuner pedal to your ampVerbinden Sie den Verstärker oder den Eingang Ihres nächsten Effektpedals in der Signalkette mit einem Standard-Instrumentenkabel (6,35 mm Klinke).

3.2 SPS-20 Guitar Power Supply Setup

Hauptstromanschluss: Connect the included AC power cable to the 'AC IN' port on the SPS-20 power supply and plug the other end into a wall outlet (100-240V, 50/60Hz).
Pedalanschlüsse: Identifizieren Sie das Volumentage and current requirements for each of your effect pedals.
Connect DC Outputs: Use the provided DC cables to connect your pedals to the appropriate isolated DC output ports on the SPS-20 (e.g., 9V 100mA, 9V 500mA, 12V 100mA, 18V 100mA). Ensure the polarity matches your pedals (center negative is standard for most guitar pedals).
Connect AC Outlets: For devices requiring AC power, plug them into the 4 top AC outlet socket holes. Ensure the total power consumption does not exceed 600W.

4. Bedienungsanleitung

4.1 Using the Tuner Pedal

Ein-/Ausschalten: Press the footswitch to engage or disengage the tuner. When engaged, the display will light up, and your instrument's signal will be muted for silent tuning. When disengaged, the true bypass circuit ensures your signal passes through unaffected.
Tuning-Prozess:
- Zupfen Sie eine einzelne Saite Ihres Instruments.
- The large color screen will display the detected note (e.g., 'A', 'E', 'G') and an indicator showing if the note is flat, sharp, or in tune.
- Adjust your instrument's tuning peg until the indicator is centered and the display shows the note is 'in tune'. The display will typically turn green when in tune.
- Wiederholen Sie dies für alle Zeichenketten.
A4 Calibration: The tuner supports A4 calibration from 430Hz to 450Hz. To adjust the A4 reference frequency, refer to the specific controls on the pedal (usually small buttons or a combination of footswitch presses) to cycle through the A4 values. The default A4 is typically 440Hz.

4.2 Using the SPS-20 Guitar Power Supply

Einschalten: Once connected to AC power, the blue LED indicators above each DC output port will illuminate, indicating that power is being supplied.
Isolierte Ausgänge: Each DC output is isolated, preventing unwanted noise and hum between pedals. Ensure you use the correct voltage and current output for each pedal to avoid damage.
AC-Steckdosen: The 4 AC outlets function as a standard power strip. Use them for amplifiers, laptops, or other AC-powered devices as needed, ensuring not to exceed the 600W total power limit.

5. Wartung

Proper maintenance ensures the longevity and optimal performance of your STRICH Tuner Pedal and SPS-20 Guitar Power Supply.

Reinigung: Use a soft, dry cloth to wipe down the units. Do not use abrasive cleaners, solvents, or excessive moisture, as this can damage the finish or internal components.
Lagerung: Lagern Sie die Geräte an einem kühlen, trockenen Ort, geschützt vor direkter Sonneneinstrahlung, extremen Temperaturen und hoher Luftfeuchtigkeit.
Handhabung: While robust, avoid dropping or subjecting the units to severe impacts. Ensure cables are connected and disconnected carefully to prevent damage to jacks.
Pflege des Netzteils: Regularly check power cables for any signs of wear or damage. Do not overload the AC outlets beyond the specified 600W limit.

6. Fehlerbehebung

If you encounter issues with your STRICH Tuner Pedal or SPS-20 Guitar Power Supply, please refer to the following common troubleshooting steps:

6.1 Tuner Pedal Issues

Tuner lässt sich nicht einschalten:
- Ensure the 9V DC power supply is correctly connected and functioning.
- Verify the power supply meets the required specifications (9V DC, center negative).
Ungenaue Stimmung:
- Ensure you are plucking a single string clearly.
- Check the A4 calibration setting; reset to 440Hz if unsure.
- Ensure your instrument's intonation is correctly set.
No sound when tuner is disengaged (True Bypass):
- Überprüfen Sie alle Kabelverbindungen (Eingang, Ausgang, amplifer).
- Test with different cables to rule out faulty cables.

6.2 SPS-20 Guitar Power Supply Issues

No power to pedals:
- Ensure the main AC power cable is securely connected to the SPS-20 and the wall outlet.
- Check if the blue LED indicators above the DC outputs are lit. If not, verify the main power connection.
- Ensure each pedal is connected to the correct voltage und Stromausgang.
- If a specific output is not working, it might be due to a short circuit. Disconnect all pedals from that output and reconnect one by one to identify the faulty pedal or cable. The isolated protection should prevent other outputs from failing.
Hum or noise in signal:
- While the SPS-20 has isolated outputs, ensure all cables are in good condition and properly shielded.
- Testen Sie die Pedale einzeln, um festzustellen, ob ein bestimmtes Pedal Geräusche verursacht.
- Stellen Sie sicher, dass in Ihrer Gesamtkonfiguration keine Masseschleifen vorhanden sind.
AC outlets not working:
- Verify the main power connection to the SPS-20.
- Ensure the total power consumption of devices plugged into the AC outlets does not exceed 600W.

7. Spezifikationen