EAZYRC FMS 1/24 FCX24M RC Crawler (Defender90)

1. Zu Endeview

The EAZYRC FMS 1/24 FCX24M RC Crawler, Defender90 model, is a highly detailed, ready-to-run (RTR) remote-controlled vehicle. This model features an officially authorized rugged appearance, faithfully replicating its Eastnor Yellow paint, intricate interior, and accessories like the roof rack, paying homage to the thrilling spirit of the Camel Trophy. Designed for off-road enthusiasts, it offers a realistic driving experience with advanced features.

Figure 1: EAZYRC FMS 1/24 Land Rover Series RC Crawlers, Camel Trophy Edition, showcasing various models including the Defender90.

2. Lieferumfang

Your EAZYRC FMS 1/24 FCX24M RC Crawler package includes the following components:

• 1x EAZYRC FMS 1/24 FCX24M RC Crawler (Defender90)
• 1x 2.4Ghz Remote Control
• 1x Lithium Polymer Battery (7.4V, included)
• 1x USB-Akkuladegerät
• 1x Small Screwdriver and spare screws
• Various accessory parts (e.g., R3A Receiver V3, Steering Servo, Oil Shock Absorbers Assembly, 050 Motor Set, Front Axle Assembly, Rear Axle Assembly, Ball Bearing Set)

Abbildung 2: Explosionsdarstellung view of the FCX24M Chassis components, including the R3A Receiver V3, Steering Servo, Oil Shock Absorbers Assembly, 050 Motor Set, Front Axle Assembly, Rear Axle Assembly, Ball Bearing Set, and LiPo Battery.

3. Einrichtung

3.1. Laden der Fahrzeugbatterie

1. Locate the 7.4V Lithium Polymer battery and the USB charger.
2. Schließen Sie den Akku an das USB-Ladegerät an.
3. Plug the USB charger into a compatible USB power source (e.g., computer USB port, USB wall adapter). The charging time is approximately 4-5 hours. The LED indicator on the charger will show charging status (usually red for charging, green for full).
4. Sobald der Akku vollständig aufgeladen ist, trennen Sie ihn vom Ladegerät.

3.2. Einlegen der Batterien in die Fernbedienung

1. Suchen Sie das Batteriefach an der Unterseite der Fernbedienung.
2. Verwenden Sie einen kleinen Schraubendreher, um die Abdeckung des Batteriefachs zu öffnen.
3. Insert 2x 1.5V AA alkaline non-rechargeable batteries, ensuring correct polarity.
4. Bringen Sie die Batteriefachabdeckung wieder an und sichern Sie sie mit der Schraube.

3.3. Einbau der Fahrzeugbatterie

1. Open the rear bed of the RC crawler to access the battery compartment.
2. Connect the charged 7.4V LiPo battery to the vehicle's power interface, ensuring a secure connection.
3. Carefully place the battery into the compartment and close the rear bed.

3.4. Binding the Remote Control and Vehicle

The vehicle and remote control are typically pre-bound from the factory. If re-binding is necessary:

1. Ensure both the vehicle and remote control are turned OFF.
2. Turn ON the remote control. The power LED will blink.
3. Turn ON the vehicle. The power LED on the remote control should become solid, indicating a successful bind.
4. If the binding fails, repeat the steps or consult the troubleshooting section.

Figure 3: The 2.4Ghz Remote Control for the FCX24M RC Crawler.

4. Betrieb

4.1. Grundlegende Steuerelemente

• Gashebel: Pull the trigger to move forward. Push the trigger away from you to brake, then push again for reverse.
• Lenkrad: Durch Drehen des Lenkrads nach links oder rechts können Sie die Fahrtrichtung des Fahrzeugs steuern.
• Lenkungstrimmung: Use the steering trim dial on the remote control to adjust the steering so the vehicle drives straight when the steering wheel is centered.

4.2. Two-Speed Transmission

The FCX24M features a two-speed transmission for versatile driving. Refer to your remote control's specific buttons or switches for shifting between high and low gears. Low gear provides more torque for crawling over obstacles, while high gear offers faster speeds for open terrain.

4.3. Beleuchtungssystem

The vehicle is equipped with brightenable headlights. The lighting can typically be controlled via a switch or button on the remote control. Consult your remote control's manual for specific lighting controls.

4.4. Fahrtipps

• Always operate your RC crawler in a safe and open area, away from people, pets, and obstacles.
• Avoid driving in deep water or extreme mud unless the vehicle is specifically rated for such conditions, as this can damage electronics.
• Practice driving in various terrains to get accustomed to the vehicle's handling characteristics.

5. Wartung

5.1. Reinigung

• After each use, especially in dirty or dusty conditions, clean the vehicle to prevent debris from affecting performance.
• Verwenden Sie eine weiche Bürste oder Druckluft, um losen Schmutz zu entfernen.amp cloth can be used for stubborn grime, but avoid excessive moisture on electronic components.

5.2. Batteriepflege

• Always fully charge the LiPo battery before use.
• Laden Sie den Akku nicht über oder entladen Sie ihn vollständig, da dies seine Lebensdauer verkürzen kann.
• Lagern Sie Batterien an einem kühlen, trockenen Ort, geschützt vor direkter Sonneneinstrahlung und extremen Temperaturen.
• Entfernen Sie die Batterien aus dem Fahrzeug und der Fernbedienung, wenn diese über längere Zeit nicht benutzt werden.

5.3. Allgemeine Inspektion

• Regularly inspect all screws, linkages, and moving parts for looseness or damage. Tighten any loose screws.
• Check the tires for wear and tear. Replace if necessary to maintain optimal traction.
• Stellen Sie sicher, dass alle Kabel und Steckverbinder fest sitzen und unbeschädigt sind.

6. Fehlerbehebung

7. Spezifikationen

• Modell: Verteidiger 90
• Produktabmessungen: 9.5 x 4.2 x 5 Zoll
• Artikelgewicht: 2.29 Pfund
• Batterie: 1 Lithium Polymer battery (7.4V, included)
• Empfohlenes Alter: Ab 16 Jahren
• Skala: 1/24
• Fahren: OS-Nummer:

8. Garantie und Support

For warranty information, please refer to the documentation included with your purchase or contact the retailer. For technical support, parts, or service inquiries, please contact EAZYRC customer service through their official webWebsite oder den Händler, bei dem das Produkt gekauft wurde.