Brightever Under Cabinet Lights Instruction Manual

1. Einleitung

Thank you for choosing Brightever Under Cabinet Lights. These LED rechargeable lights are designed to provide convenient and efficient illumination for various indoor spaces such as kitchens, bedrooms, closets, and hallways. Featuring motion sensor capabilities, stepless dimming, and multiple installation options, these lights enhance visibility and energy efficiency in your home.

2. Lieferumfang

• 5 x Brightever Under Cabinet Lights
• Bedienungsanleitung
• Mounting Hardware (screws and expansion anchors)
• Selbstklebende Metallplatten
• 3 x USB-Ladekabel
• Warranty/Explanation Sheet

3. Produktspezifikationen

4. Einrichtung und Installation

The Brightever Under Cabinet Lights offer three convenient installation methods:

Method 1: Magnetic Attachment

The lights have built-in powerful magnets. If your desired mounting surface is ferromagnetic (e.g., a metal refrigerator or shelf), you can directly attach the light to it.

Method 2: Adhesive Metal Plate

For non-ferromagnetic surfaces, use the provided adhesive metal plates.

1. Clean the installation area thoroughly to ensure it is dry and free of dust.
2. Peel off the protective film from the adhesive side of the metal plate.
3. Attach the metal plates to the desired location. Ensure they are aligned with the magnets on the back of the light.
4. Snap the light onto the attached metal plates.

Methode 3: Schraubmontage

For a more permanent installation, use the provided screws and expansion anchors.

1. Mark two holes at the mounting spot, spacing them to match the width of the light bar's mounting points.
2. Drill holes at the marked spots. Insert the expansion anchors.
3. Secure the metal plates with screws into the anchors.
4. Mount the light onto the secured metal plates.

Installationsvideo-Anleitung

Video: Official Brightever guide demonstrating the installation process and various features of the under cabinet lights.

5. Bedienungsanleitung

The under cabinet lights feature a user-friendly button for control.

Ein-/Ausschalten und Modusauswahl

• Einmal drücken: To power on the light.
• Nochmal drücken: To switch to Motion Sensor Mode.
• Press a third time: To shut down the light.

Stufenloses Dimmen

While the light is on (in either mode), long press the button to steplessly adjust the brightness from 10% to 100%. The light features a memory function that retains the last set brightness level.

Bewegungssensor-Modus

In Motion Sensor Mode, the light automatically detects human activity within a 120° detection angle and a 10FT sensing range. It will turn off after 20 seconds of inactivity to conserve energy.

Aufladen der Lichter

The lights are equipped with a 1500mAh rechargeable battery. Use the provided USB charging cables for optimal performance.

• Connect the USB charging cable to the USB-C port on the light.
• A red indicator light will show that the device is charging.
• The indicator light will turn green when fully charged (approximately 3-4 hours).
• A full charge provides up to 10 hours of light in Always On Mode (at 100% brightness) or 35-60 days in Motion Sensor Mode (based on 10-20 detections per day).

6. Wartung

• Reinigung: Die helle Oberfläche mit einem weichen, trockenen Tuch abwischen. Keine Scheuermittel oder Lösungsmittel verwenden.
• Batteriepflege: To prolong battery life, avoid fully discharging the battery frequently. Recharge the lights when the brightness noticeably diminishes.
• Lagerung: Wenn Sie die Lampen längere Zeit lagern, laden Sie sie vollständig auf und bewahren Sie sie an einem kühlen, trockenen Ort auf. Laden Sie die Akkus alle 3–6 Monate auf, um ihre Lebensdauer zu erhalten.

7. Fehlerbehebung

• Licht geht nicht an:
  • Ensure the battery is charged. Connect to a power source using the provided USB cable.
  • Check if the light is in the correct operating mode (Always On or Motion Sensor). Press the button to cycle through modes.
• Motion sensor is not detecting movement:
  • Stellen Sie sicher, dass der Sensor nicht blockiert ist.
  • Verify the light is in Motion Sensor Mode.
  • Avoid positioning multiple sensors too closely, as this may interfere with operation.
  • The detection range is 10FT and angle is 120°. Ensure movement occurs within this area.
• Der Akku entlädt sich schnell:
  • Ensure the light is fully charged (indicator turns green).
  • In Motion Sensor Mode, frequent activations will consume more battery.
  • Ensure you are using the provided charging cables. Other cables may not be compatible and could affect charging efficiency or battery lifespan.
• Das Licht ist zu schwach oder zu hell:
  • Long press the button to adjust the brightness using the stepless dimming feature.

8. Sicherheitshinweise

• Das Produkt darf nicht zerlegt oder verändert werden.
• Von Wasser und Umgebungen mit hoher Luftfeuchtigkeit fernhalten.
• Vor direkter Sonneneinstrahlung und hohen Temperaturen schützen.
• Außerhalb der Reichweite von Kindern aufbewahren.
• Entsorgen Sie Batterien gemäß den örtlichen Vorschriften.

9. Garantie und Support

Brightever is committed to providing quality products and customer satisfaction. For any questions, concerns, or support needs regarding your under cabinet lights, please refer to the included Warranty/Explanation Sheet or contact Brightever customer service. We strive to offer friendly and helpful services.