Einführung
Thank you for choosing the SERWALL 33" Propane Fire Pit Table. This manual provides essential information for the safe assembly, operation, and maintenance of your fire pit. Please read all instructions carefully before use and retain this manual for future reference.
Wichtige Sicherheitsinformationen
WARNUNG: Die Nichtbeachtung dieser Anweisungen kann zu Bränden, Explosionen oder Verbrennungsgefahren führen, die Sachschäden, Personenschäden oder den Tod zur Folge haben können.
- Halten Sie einen Sicherheitsabstand zu brennbaren Materialien ein.
- Do not leave the fire pit unattended during operation.
- Always extinguish the fire before leaving the area or going to sleep.
- Store fuel canisters upright and away from heat sources when not in use.
- Never dispose of used fuel canisters in a fire.
- Ensure adequate ventilation when operating the fire pit.
- Halten Sie Kinder und Haustiere von der Feuerstelle fern.
- Do not use the fire pit in enclosed spaces.
- Lagern oder verwenden Sie kein Benzin oder andere brennbare Dämpfe und Flüssigkeiten in der Nähe dieses oder anderer Geräte.
Produkt überview
The SERWALL Propane Fire Pit Table is designed for outdoor use, providing warmth and ambiance. Key features include a 50,000 BTU heat output, a glass wind guard, a removable lid for versatile use, and a user-friendly pull-out shelf for the propane tank.
Komponenten:
- Fire Pit Table Base
- Edelstahlbrenner
- Windschutz aus Glas
- Abnehmbarer Deckel
- Fire Glass (6.6 lbs)
- Propane Tank Pull-out Shelf
- Pulse Ignition System
- High-Quality Hose and Regulator
- Durable Nylon Cover
- Verstellbare Füße

Abbildung 1: Product dimensions of the SERWALL 33" Propane Fire Pit Table. The table measures 33.5"L x 33.5"W x 24.4"H, with a fire pot size of 11"L x 11"W x 2.4"D.
Montageanleitung
The fire pit table is designed for easy assembly, with most components pre-assembled. Follow the steps below for complete setup. It is recommended to have two people for assembly.
Video 1: Official SERWALL Propane Fire Pit Table Assembly Guide. This video provides a visual walkthrough of the assembly process.
- Komponenten auspacken: Nehmen Sie alle Teile vorsichtig aus der Verpackung und überprüfen Sie sie anhand der Teileliste (nicht in dieser Anleitung enthalten, siehe Produktverpackung).
- Grundstruktur zusammenbauen: Connect the side panels to the main frame using the provided bolts. Ensure all connections are secure.
- Systemsteuerung installieren: Secure the control panel to the designated area on the fire pit table.
- Attach Pull-out Shelf: Install the pull-out shelf mechanism for the propane tank. Ensure it slides smoothly.
- Place Burner and Fire Glass: Position the stainless steel burner in the center opening. Carefully distribute the fire glass around the burner.
- Install Glass Wind Guard: Assemble the glass wind guard panels and secure them around the burner area.
- Propangastank anschließen: Slide a 20 lbs propane tank onto the pull-out shelf. Connect the regulator hose to the propane tank valve, ensuring a tight seal.
- Insert AAA Battery: The pulse ignition system requires one AAA battery (not included). Insert it into the ignition switch compartment.
- Füße anpassen: Use the height-adjustable feet to level the fire pit table on uneven surfaces.

Abbildung 2: Visual representation of the simplified assembly process, highlighting that 80% of components are pre-assembled for quick setup.

Abbildung 3: Detail of the pull-out shelf for easy propane tank access and replacement, featuring durable sliding rails, silent rubber wheels, and height-adjustable feet.
Bedienungsanleitung
Follow these steps to safely operate your SERWALL Propane Fire Pit Table.
- Vor dem Anzünden: Ensure the propane tank is securely connected and the gas valve is fully open. Check for any gas leaks using a soapy water solution on connections; do not use an open flame.
- Anzünden der Feuerstelle:
- Turn the control knob to the "LOW" position.
- Press and hold the electronic ignition button. You should hear a clicking sound.
- While holding the ignition button, slowly turn the control knob to the "HIGH" position.
- Once the burner ignites, continue to hold the ignition button for 10-15 seconds to ensure the flame is established.
- Release the ignition button. If the flame goes out, repeat the lighting procedure.
- Flamme einstellen: Rotate the control knob between "LOW" and "HIGH" to adjust the flame height and heat output.
- Herunterfahren:
- Drehen Sie den Reglerknopf in die Position „AUS“.
- Schließen Sie das Ventil am Propangastank vollständig.
- Allow the fire pit to cool down completely before covering or moving.

Abbildung 4: The control panel featuring the pulse ignition button and the gas control knob for adjusting flame intensity.
Video 2: SERWALL 33 Inch Square Propane Fire Pit Table in use, demonstrating its features and ambiance.
Wartung
Regelmäßige Wartung gewährleistet die Langlebigkeit und den sicheren Betrieb Ihres Feuertisches.
- Reinigung: Clean the exterior surfaces with mild soap and fresh water. Avoid abrasive cleaners that may damage the finish. Ensure the fire pit is completely cool before cleaning.
- Brennerwartung: Periodically inspect the burner and gas connections for any blockages or damage. Clean the burner ports with a soft brush if necessary.
- Lagerung: When not in use, especially during inclement weather or off-season, cover the fire pit table with the provided durable nylon cover. Store the propane tank in a well-ventilated area, away from direct sunlight and heat sources.
- Windschutz aus Glas: Reinigen Sie die Glasscheiben mit einem Glasreiniger und einem weichen Tuch.

Abbildung 5: The fire pit table protected by its durable nylon cover, illustrating proper storage during adverse weather conditions.
Fehlerbehebung
If you encounter issues with your fire pit table, refer to the following common problems and solutions.
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Brenner zündet nicht. | No gas flow, ignition battery dead, clogged burner ports, loose connections. | Check propane tank valve is open. Replace AAA battery. Clean burner ports. Tighten all gas connections. |
| Low flame or inconsistent flame. | Low propane level, regulator issue, partially clogged burner ports. | Check propane tank level. Ensure regulator is fully connected. Clean burner ports. |
| Gasgeruch festgestellt. | Gas-Leck. | Immediately turn off gas at the tank. Do not operate. Check all connections with soapy water. If odor persists, contact a qualified service technician. |
Technische Daten
- Produktabmessungen: 33.5"T x 33.5"B x 24.4"H
- Fire Pot Size: 11 Zoll L x 11 Zoll B x 2.4 Zoll T
- Heizleistung: Bis zu 50,000 BTU
- Kraftstoffart: Flüssiggas (Propan)
- Propane Tank Compatibility: 20 lbs (not included)
- Tabletop Load Capacity: 220 Pfund
- Fire Glass Included: 6.6 Pfund
- Zündsystem: Pulse Ignition (requires 1 AAA battery, not included)
- Material: HDPE panels, Stainless steel burner, High-strength metal frame
- Farbe: Schwarz
Garantie und Support
SERWALL is committed to customer satisfaction. For any product questions, care instructions, or warranty inquiries, please contact our customer support team. Refer to your purchase documentation for specific warranty details.
Kontaktinformationen: Please refer to the contact details provided with your purchase or visit the official SERWALL webWebsite für Unterstützung.